Covering 7 cities 😂 I have some vids edited and ready to upload soon! Been slackin 💀
@michaeltaylor1764Күн бұрын
Thank you. I didn't need to use my Smart Key reset tool afterall. All I had to do was find the gap that the new key wasn't installed all the way in to the lock.
@kqxx2 күн бұрын
where can I buy conversion collar part
@Sumant_Sumant2 күн бұрын
Works for me great video...🎉🎉🎉🎉
@40loopylou13 күн бұрын
Installed new lock box, reset code, lock won’t open! I tried this and I can feel the ups and downs indicating the code is what I just set it to 20 minutes ago, but my lock still won’t open. I am thinking it’s a defective lock box :(
@LockandKilo2 күн бұрын
Various eras of this lock from old to new can be a little different. On the newer version of this lock you may need to move all of the wheels 2 or 3 times each!
@dicknastee16525 күн бұрын
It’s pronounced Lee Sher. 😊
@JayLaw11257 күн бұрын
LEGIT‼️Thanks man, less than 5 minutes, including making the shim, a lil deductive reasoning and I was in. 💪🏻
@brendadaubenspeck17719 күн бұрын
Great video!
@andywaters94411 күн бұрын
I found it very easy with a soda can thick metal strip. Thanks for making it easy.
@TheBlackstarrt11 күн бұрын
I felt a big pull up on each and it was the number after the number I felt it on. So if I felt a big pull up on 1, it was actually 2.
@seckora11 күн бұрын
When would you use this?
@LockandKilo11 күн бұрын
When you get to a rekey and the tenant didn’t leave the old key, old key is lost or the property has multiple same locksets, but all different keys. In order to rekey the lock, you must have a way to turn the core over. So, you can use the existing keys if they have them. You can pick each lock over individually which is time consuming or you can shim them. It’s very common for home owners and renters to buy their locks and install them themselves, so they go to the big box store and buy the same finish/style locks. However, the keys won’t always match, so when the tenant moves out or the house is sold, the new tenant has the key to the front door, but the rest of the home is mismatched and they do not always get all of the 2-4 keys.
@seckora11 күн бұрын
@@LockandKilo Thank you! That explains a lot
@stephennegrotti344811 күн бұрын
I'm new to the lock sport, and other videos have rings for a rapid fire. Then they file down the end. Have you used the bump rings? And if so did you file the key down? Thank you
@relicpathfinder280013 күн бұрын
I have three store bought warded locks (I bought for practice). Two of them warded keys will not work on. One lock is over sized (the skeleton warded key doesn't even touch the in sides of the lock). The othet lock is so tight the warded keys bend, I've used warded by-pass keys from three separate companies with similar results, even the key it came with takes a lot of "umpf" to get to work.
@sandracassell530214 күн бұрын
what if your key gets stuck in cylinder after you pull it out of the device?
@LockandKilo14 күн бұрын
The key may not have fully rotated back to it’s ‘12 O’Clock Position.
@shayne8714 күн бұрын
How to Disassemble a Defiant Doorknob? turn the knob and it falls apart lol. yes I'm exaggerating a little but i avoid Defiants unless I have to match a finish like polished brass or existing locks or the dreaded budget. High tech version of this situation is Milocks. Not my first choice 😅
@shayne8715 күн бұрын
These are my nightmare. My staff constantly had trouble with the rekeying often so the cradles were necessary. I have had really bad luck with the cradles and the whole "smart Lock" system. BOTH colors gave us headaches. Our staff all assumed the red one was better but that might have been anecdotal and the fact we couldn't buy another red one (conspiracy theories). Ikea flatbox furniture has better instructions. Written steps would have been nice than these pictoglyphs. Making multiple trips to the maintenance shop to get tools and the cradle negates any time saved by simply repinning. And the added benefit being able to master key everything made my decision to go back to dumb locks easy. Now my guys don't have to grab and return keys between work orders. To me, Smart Lock was another false promise to make my job easier. Like LED light bulbs last 25 years so the next bulb you change will be the last before retirement...
@efhorta196515 күн бұрын
Wish I knew this tool existed. I just re-set six smart locks with lost key, to a new key. The old way takes patience and bionic vision.
@shayne8715 күн бұрын
Great video. I stumbled on this because a family member wants me to master her locks which are Defiants lol. 30 years of being a super/property manager and I've used Schlage, Arrow, Sargent, and of course Kwikset (which I assumed was the cheapest brand I could master or rekey) . And if I was amazed that the defiant lock could be done I was FLOORED when I saw lock #2 was a Brinks!!! Kudos. I also liked the way he assigned genders to the parts. I have called parts bastards and SOBs but never "him" 😅
@mvtrinidad198116 күн бұрын
Where do i get the programming code? I’ve never change my code eversince I bought the lock…
@user-hf3et2jd1j16 күн бұрын
One note to everyone Kwikset pin tumblers do not work with Defiant cores as they are different sizes than Defiant pins.. if you are rekeying Defiant locks get the proper pins for that lock.. then the keying will go smoothly . thank you.
@Alistair-gi3bx21 күн бұрын
Definitely going to buying one now, I work maintenance and have had to drill out several locks. You explain using the tool clearly and concise.
@OscarHernandez-rj1dl23 күн бұрын
After you pull out the the socket or core the pins inside the motor are the master pins?
@OscarHernandez-rj1dl23 күн бұрын
How do you know if they're Master pins
@LockandKilo23 күн бұрын
Master Pins will look like shorter versions of your top pins. They will basically be extra pins in the top chambers. If you pull the plug without a key, you may even find them on top of your bottom pins, you will notice flat pins on top of your beveled ones.
@wintrack123423 күн бұрын
This instruction is very good. I carefully follow his instruction. I successfully unblock my comb lock just use a soda can for the tool. I recommend to spray some WD40 to loosen the lock.
@srspicesllc24 күн бұрын
Great video, thank you
@craigslitzer485725 күн бұрын
I'm kinda glad I'm a locksmith at a government facility and not with the public at large. I feel like half of the job is proving ownership. I get to skip that half entirely. Everything inside the building is mine to service, and nothing outside of it. It's a very convenient dividing line.
@waynesummers92127 күн бұрын
this is the best video i have seen on how to reverse the key hole THANKS
@no1philosopher27 күн бұрын
Great video! The tips leading up to the moneyshot are great for smartkey newcomers. Something you might find interesting and someone else might have mentioned they exist: I have a red tool with the new label. Not sure when it was purchased, but it was in the maintenance shop at a property I just started managing. Thanks again and grats on surpassing 7 subs :)
@changclifton78628 күн бұрын
I give a range for pricing because you never know what other additional work may need to be done. It also weeds out the stingy customers that waste your time. A cheap locksmith may not be good, but a good locksmith isn't cheap!
@mexicansasuke29 күн бұрын
This helped so much
@rubychen2635Ай бұрын
You were a great help! Thank you!
@bevegaschannel1670Ай бұрын
👍👍
@LongLiveSqualayАй бұрын
This just saved me from needing to get a hotel after a 4hr drive because I wasn’t given the code. Thank you bro!!! 🙏🏽
@stevieminassian3970Ай бұрын
One left on the wall of My new home. This worked purfectly
@originalwildone3790Ай бұрын
Thanks for the video. I purchased a home that has a GE supra key box attached to it. The previous owners of the home did not know the combo. I am going to have to cut the box out unless there is another way to open it. What say you?
@beave200Ай бұрын
So I have a smart lock cylinder but it won't seat all the way into the cradle. The little bar that's in the back in the cradle, won't let it. Any ideas.
@WesFlewАй бұрын
Could you theoretically pick the lock and then rekey it when it's in the correct position?
@bigdouglas1982Ай бұрын
Your information and techniques are dead spot on my friend great job and thanks for sharing
@ubrvidgeek886Ай бұрын
Does the same apply for the Deadbolt Cylinder?
@YaBoiBeetusАй бұрын
Im new to the locksmith business and this has been a great help to starting my business!
@jaxchristian3080Ай бұрын
Typically simple.
@jaxchristian3080Ай бұрын
Schlage omfg been looking for over an hour says 2 3/4 but I still can't figure out
@jaxchristian3080Ай бұрын
Sclage light commercial f series
@jeffgehman8344Ай бұрын
Wow! At 5:58 is the info I needed ... my lock set didn't have the 2 spring tabs as you show in the first 5 minutes, and it turns out your instructions at 5:58 to insert my key and rotate the lock 180 degrees did the trick instantly! I watched 3 other videos all explaining how to use the Kwikset tool (or 2 screwdrivers) but of course neither would work for me ... Thanks!
@SeeingSebastianАй бұрын
Criminals everywhere thank you😂
@familyman8439Ай бұрын
What’s the reason for this though? Is it better Security?
@LockandKiloАй бұрын
These are useful for Metal doors that cannot be chiseled. Also, if you have a narrow wooden door or you the installer may not have a chisel or be comfortable using a chisel, possibly a fear of splitting the door for example.. Many doors are sold pre-cut, some latches are recessed, some are not. So, this gives a DIY individual an easy option. But, most of the time you find these on metal door applications :)
@Gsplprchr7Ай бұрын
Great video, but curious as to why you refer to these pieces of metal as "him".
@delg1211Ай бұрын
not a bad video... but confusing mentioning "rekeying". This has nothing to do rekeying- and when you rekey the Quikset, you don't have to take anything apart. 🙏🏾
@LockandKiloАй бұрын
I have a handful of videos on rekeying Kwiksets, I tried saving time on these later videos by just describing various ways on removal. Once the channel exploded and more than a handful of people started finding it, I realized I needed to go wayyy more in depth haha This was a response to a question and I happened to have an old scrap one on hand!
@kelleyjeanlongАй бұрын
Super helpful! Thank you so much!
@freebird7091Ай бұрын
Wow!! Thank you very much! You just saved my life 😂😂 I was almost crying 😅
@prairiestatepatriotsАй бұрын
Awesome video. Exactly what I was looking for. Subbed.
![[112] Convert Standard Latch to Drive-In Style Latch](/img/d.gif)
Пікірлер
Where did you go man
Covering 7 cities 😂 I have some vids edited and ready to upload soon! Been slackin 💀
Thank you. I didn't need to use my Smart Key reset tool afterall. All I had to do was find the gap that the new key wasn't installed all the way in to the lock.
where can I buy conversion collar part
Works for me great video...🎉🎉🎉🎉
Installed new lock box, reset code, lock won’t open! I tried this and I can feel the ups and downs indicating the code is what I just set it to 20 minutes ago, but my lock still won’t open. I am thinking it’s a defective lock box :(
Various eras of this lock from old to new can be a little different. On the newer version of this lock you may need to move all of the wheels 2 or 3 times each!
It’s pronounced Lee Sher. 😊
LEGIT‼️Thanks man, less than 5 minutes, including making the shim, a lil deductive reasoning and I was in. 💪🏻
Great video!
I found it very easy with a soda can thick metal strip. Thanks for making it easy.
I felt a big pull up on each and it was the number after the number I felt it on. So if I felt a big pull up on 1, it was actually 2.
When would you use this?
When you get to a rekey and the tenant didn’t leave the old key, old key is lost or the property has multiple same locksets, but all different keys. In order to rekey the lock, you must have a way to turn the core over. So, you can use the existing keys if they have them. You can pick each lock over individually which is time consuming or you can shim them. It’s very common for home owners and renters to buy their locks and install them themselves, so they go to the big box store and buy the same finish/style locks. However, the keys won’t always match, so when the tenant moves out or the house is sold, the new tenant has the key to the front door, but the rest of the home is mismatched and they do not always get all of the 2-4 keys.
@@LockandKilo Thank you! That explains a lot
I'm new to the lock sport, and other videos have rings for a rapid fire. Then they file down the end. Have you used the bump rings? And if so did you file the key down? Thank you
I have three store bought warded locks (I bought for practice). Two of them warded keys will not work on. One lock is over sized (the skeleton warded key doesn't even touch the in sides of the lock). The othet lock is so tight the warded keys bend, I've used warded by-pass keys from three separate companies with similar results, even the key it came with takes a lot of "umpf" to get to work.
what if your key gets stuck in cylinder after you pull it out of the device?
The key may not have fully rotated back to it’s ‘12 O’Clock Position.
How to Disassemble a Defiant Doorknob? turn the knob and it falls apart lol. yes I'm exaggerating a little but i avoid Defiants unless I have to match a finish like polished brass or existing locks or the dreaded budget. High tech version of this situation is Milocks. Not my first choice 😅
These are my nightmare. My staff constantly had trouble with the rekeying often so the cradles were necessary. I have had really bad luck with the cradles and the whole "smart Lock" system. BOTH colors gave us headaches. Our staff all assumed the red one was better but that might have been anecdotal and the fact we couldn't buy another red one (conspiracy theories). Ikea flatbox furniture has better instructions. Written steps would have been nice than these pictoglyphs. Making multiple trips to the maintenance shop to get tools and the cradle negates any time saved by simply repinning. And the added benefit being able to master key everything made my decision to go back to dumb locks easy. Now my guys don't have to grab and return keys between work orders. To me, Smart Lock was another false promise to make my job easier. Like LED light bulbs last 25 years so the next bulb you change will be the last before retirement...
Wish I knew this tool existed. I just re-set six smart locks with lost key, to a new key. The old way takes patience and bionic vision.
Great video. I stumbled on this because a family member wants me to master her locks which are Defiants lol. 30 years of being a super/property manager and I've used Schlage, Arrow, Sargent, and of course Kwikset (which I assumed was the cheapest brand I could master or rekey) . And if I was amazed that the defiant lock could be done I was FLOORED when I saw lock #2 was a Brinks!!! Kudos. I also liked the way he assigned genders to the parts. I have called parts bastards and SOBs but never "him" 😅
Where do i get the programming code? I’ve never change my code eversince I bought the lock…
One note to everyone Kwikset pin tumblers do not work with Defiant cores as they are different sizes than Defiant pins.. if you are rekeying Defiant locks get the proper pins for that lock.. then the keying will go smoothly . thank you.
Definitely going to buying one now, I work maintenance and have had to drill out several locks. You explain using the tool clearly and concise.
After you pull out the the socket or core the pins inside the motor are the master pins?
How do you know if they're Master pins
Master Pins will look like shorter versions of your top pins. They will basically be extra pins in the top chambers. If you pull the plug without a key, you may even find them on top of your bottom pins, you will notice flat pins on top of your beveled ones.
This instruction is very good. I carefully follow his instruction. I successfully unblock my comb lock just use a soda can for the tool. I recommend to spray some WD40 to loosen the lock.
Great video, thank you
I'm kinda glad I'm a locksmith at a government facility and not with the public at large. I feel like half of the job is proving ownership. I get to skip that half entirely. Everything inside the building is mine to service, and nothing outside of it. It's a very convenient dividing line.
this is the best video i have seen on how to reverse the key hole THANKS
Great video! The tips leading up to the moneyshot are great for smartkey newcomers. Something you might find interesting and someone else might have mentioned they exist: I have a red tool with the new label. Not sure when it was purchased, but it was in the maintenance shop at a property I just started managing. Thanks again and grats on surpassing 7 subs :)
I give a range for pricing because you never know what other additional work may need to be done. It also weeds out the stingy customers that waste your time. A cheap locksmith may not be good, but a good locksmith isn't cheap!
This helped so much
You were a great help! Thank you!
👍👍
This just saved me from needing to get a hotel after a 4hr drive because I wasn’t given the code. Thank you bro!!! 🙏🏽
One left on the wall of My new home. This worked purfectly
Thanks for the video. I purchased a home that has a GE supra key box attached to it. The previous owners of the home did not know the combo. I am going to have to cut the box out unless there is another way to open it. What say you?
So I have a smart lock cylinder but it won't seat all the way into the cradle. The little bar that's in the back in the cradle, won't let it. Any ideas.
Could you theoretically pick the lock and then rekey it when it's in the correct position?
Your information and techniques are dead spot on my friend great job and thanks for sharing
Does the same apply for the Deadbolt Cylinder?
Im new to the locksmith business and this has been a great help to starting my business!
Typically simple.
Schlage omfg been looking for over an hour says 2 3/4 but I still can't figure out
Sclage light commercial f series
Wow! At 5:58 is the info I needed ... my lock set didn't have the 2 spring tabs as you show in the first 5 minutes, and it turns out your instructions at 5:58 to insert my key and rotate the lock 180 degrees did the trick instantly! I watched 3 other videos all explaining how to use the Kwikset tool (or 2 screwdrivers) but of course neither would work for me ... Thanks!
Criminals everywhere thank you😂
What’s the reason for this though? Is it better Security?
These are useful for Metal doors that cannot be chiseled. Also, if you have a narrow wooden door or you the installer may not have a chisel or be comfortable using a chisel, possibly a fear of splitting the door for example.. Many doors are sold pre-cut, some latches are recessed, some are not. So, this gives a DIY individual an easy option. But, most of the time you find these on metal door applications :)
Great video, but curious as to why you refer to these pieces of metal as "him".
not a bad video... but confusing mentioning "rekeying". This has nothing to do rekeying- and when you rekey the Quikset, you don't have to take anything apart. 🙏🏾
I have a handful of videos on rekeying Kwiksets, I tried saving time on these later videos by just describing various ways on removal. Once the channel exploded and more than a handful of people started finding it, I realized I needed to go wayyy more in depth haha This was a response to a question and I happened to have an old scrap one on hand!
Super helpful! Thank you so much!
Wow!! Thank you very much! You just saved my life 😂😂 I was almost crying 😅
Awesome video. Exactly what I was looking for. Subbed.