Пікірлер

• 
  @CasualLemmonJuice4 күн бұрын

  Guys this looks pretty serious, I don’t think it’s a test

• 
  @lynnesteincamp7010Ай бұрын

  Thanks for posting this.

• 
  @leviathan7627Ай бұрын

  goodold EASyPLUS

• 
  @justasadmanforabanana4124Ай бұрын

  0:36 Forty Fu-

• 
  @RAYM4NАй бұрын

  Darth Vader is working for NOAA conformed

• 
  @user-hd8el4lv5iАй бұрын

  Its steel

• 
  @juddheess69832 ай бұрын

  Dude when this guy said 18 years I thought he was gonna say since the last time he cleaned the damn thing

• 
  @stargrl772 ай бұрын

  thx bro it worked finallyyy now I can go get high

• 
  @summernite12 ай бұрын

  “EASyPLUS”1:24

• 
  @dadajackyo3 ай бұрын

  How did this clutch hold up? I just got a 855D and need to replace the belt, and possibly the clutch. Just curious if the eBay clutch held up

• 
  @Hubjeep3 ай бұрын

  Hi, it's still working like new! I got it on ebay, it's an OEM part. I put less than 100 hours on my Gator a year.

• 
  @Theweatherchannelfam123 ай бұрын

  0:35 bro said the f word “Forty Fu-“

• 
  @almilhouse90593 ай бұрын

  I just replaced mine, watched the 1st minute or so and that was enough to know it wasn't crazy difficult just looked worse in where it was positioned... appreciate the video, mine the rubber seal burst and was leaking quite a lot, I just got the whole brass unit €26, changed out in 2 mi utes, closed up, turned on worked awayno bother.....

• 
  @a3denclaggett2544 ай бұрын

  That is a SLOW EOM lmao

• 
  @aran59465 ай бұрын

  The hydraulic jack was replaced but is still leaking. What's causing that. Then then I replaced it again with the old one it leaked from the top instead of the top. Then I replaced the cap and copper wire and then the top of that started leaking. What am I doing wrong. Any help.

• 
  @tliggexperience5 ай бұрын

  I noticed you just hand tightened the retaining ring, whereas some people hammer it tight. Wondering your thoughts on that

• 
  @user-gf8jt4us3s5 ай бұрын

  Thank you I did follow your step and replaced the pump, first time in my life, very informative,

• 
  @bobbysmooth23446 ай бұрын

  Dude… I feel like you just invited the wheel with this one, thanks!

• 
  @Hubjeep6 ай бұрын

  LOL, Thanks!

• 
  @hayderaltaleb68976 ай бұрын

  Professional work, I'm gonna do to my 2014 f150 platinum 😂

• 
  @GuestInvitado-gd3bi6 ай бұрын

  Thank you for the instructions on how to assemble these carts and for the comparison of both. I went for the Harbor Freight because it had a better price. Good video, thanks a bunch.👍👍

• 
  @Hubjeep6 ай бұрын

  I'm glad it was helpful! Soo long ago! Does Northern still still sell that cart? HF may call it "Vulcan" now?

• 
  @wtla6 ай бұрын

  Your neighbors will hate you, but only for 30 seconds

• 
  @Hubjeep6 ай бұрын

  They again hate me when I lob aerosol paint cans into it [do not try this at home]!

• 
  @jongipson97147 ай бұрын

  I bought my welding cart from Summit Racing for $125plus tax .065 percent much better than the other I found

• 
  @rageyyyyy7 ай бұрын

  For the first time he said a cuss word on the tv

• 
  @jshepard1528 ай бұрын

  Cool video. But before you do this, make damn sure the old contents of the drum were not flammable. Vapors can be just as explosive as the former contents, and guys have gotten killed just by drilling or cutting into "empty" drums that exploded. I was just reading about a guy in Pennsylvania who got killed by a burn barrel last week. And I know of another incident in Iowa that killed a man who was welding on top of a barrel, using it as a workbench. Filling the drum with water before cutting into it can displace explosive vapors, if done correctly.

• 
  @jspinosa509 ай бұрын

  Thanks

• 
  @misskitty85109 ай бұрын

  This lighter doesn't have a name on it and maybe that's why but it will not light but it shows it's got liquid of some sort in it, and this piece of crap will not light for anything! fast, slow, right side up, upside down, sideways, NOTHING!

• 
  @Schatzi19879 ай бұрын

  You are a fucking genius! Thank you I appreciate you

• 
  @patmanley92159 ай бұрын

  Thank you

• 
  @kellyeckstein64749 ай бұрын

  OMGOMGOMG it is so scaryI’m 😅

• 
  @Sabresalt9 ай бұрын

  Ok so that"s not THAT bad

• 
  @sulfanilimidex9 ай бұрын

  Theres supposed to be one coming up on Oct 4th? Yeahhh.. I’m unplugging every device in my house.

• 
  @Masterminds292919 ай бұрын

  October 4th at 2:20pm.......

• 
  @Hubjeep9 ай бұрын

  7 years later and they still work!!!!!

• 
  @dcboyhacker008 ай бұрын

  Ayyeee

• 
  @jeffreyeiford27509 ай бұрын

  Looks great - very good video - thank you . Now I need to see what I can do with my 2003

• 
  @chazmology9 ай бұрын

  I cut the trunk open left a trap door...no more dropping gas tank...nice job brother

• 
  @timjs101810 ай бұрын

  Hey man, great method and I'll be using it today, thanks. BUT I do want to say... use safety glasses man. One of my technicians just lost his left eye from using the air hammer on a wheel bearing. The bearing splintered and shot to the back of his eyeball like a bullet, tore the retina off the back wall. He's blind in that eye now. I know pretty much every single "old timer" in every type of shop will say "I aint wearing those pussy goggles" but look man, I ain't going blind over here. No thanks.

• 
  @shemp30810 ай бұрын

  It's not something I would do on my truck! However, it does look really nice on your truck.

• 
  @Sha-Niyah10 ай бұрын

  THANK YOU!!

• 
  @abramornelas2011 ай бұрын

  I remember the eas test in 2011 and it did not look like this

• 
  @user-pc3or5kf4l11 ай бұрын

  Can I have that TV

• 
  @racecarchar11 ай бұрын

  Do you think it can be done without removing manifold?

• 
  @Hubjeep11 ай бұрын

  As I recall there was some room under the manifold to access the plug. You don't need much room to get it in place and tighten it down.

• 
  @tehminaaslam832411 ай бұрын

  how to refill this lighter

• 
  @memoryelectricity8788 Жыл бұрын

  THANK YOU SO MUCH YOU DON'T UNDERSTAND HOW LONG I'VE BEEN STRUGGLING

• 
  @firemiztreze5430 Жыл бұрын

  Loss my lighter so I'ma use this for my blunts

• 
  @coreyysmithh Жыл бұрын

  that shit looks so clean, i need it

• 
  @hankhighsmith9050 Жыл бұрын

  Well I'll be a monkey's uncle.

• 
  @oscarhedden9524 Жыл бұрын

  $400 now at Harbor Freight.

• 
  @spccantonment Жыл бұрын

  0:26 Heck yeah it is!

• 
  @silverseal99 Жыл бұрын

  Great video! Having a similar issue with a 2019 HPX815E Diesel Gator. Pulled the primary clutch no problem and ultrasonically cleaned it. Clutch compresses and releases by hand but the rollers on the spider that limit the travel of the flyweights are only about 270 degrees complete--is this normal or evidence of extreme wear? I would have expected them to be 360 degrees round... A detailed photo of the ends of the spider showing the rollers would be very useful. Also, has anyone had any proven success with an aftermarket primary clutch? The John Deere parts ought to be called "Dear Parts" because they want $700 now for a replacement AM13887!

• 
  @scottmisus4678 Жыл бұрын

  * 9/16 socket, not 9/16 ratchet. Shop vac. Clippings.

• 
  @Hubjeep Жыл бұрын

  HAHA, I think I had too many Miller Lite's that night! And YES, now I use the leaf blower to clean the deck before putting it away.

• 
  @sychopathy Жыл бұрын

  god gob 👍