7 years later and they still work!!!!!

@dcboyhacker00

8 ай бұрын

Ayyeee

I personally liked this video, quite, not a lot of talking, simple. The birds make it kinda relaxing. I watch a lot of install videos for our Jeep, and came across this one for my truck, great job, ignore the ignorant simpletons.

honestly one of the best videos ive seen even just for removing emblems. clean install

Excellent detail. You did a great job and they look really sharp. Lot's of nice song birds in your neighborhood!

I used to have a 2004 f150 fx4 in blazing yellow. I loved that truck, it was my first of many f150s.

, very nice prep work, most people don't do half the stuff you did in your prep work, good job.

Well done video, I'll definitely be getting a set of those for my f-150. Thank you whomever created this video 👍👍👍👍

Listen to all the birds in the background relaxing.

Nice truck man and good job that lighting I'm thinking of getting it done on my truck too.

Dude! Thank for posting this.

Got mine ordered! Thanks for the install video!

@jddeleon93

2 жыл бұрын

From where I would like to order me a set!?

Very cool- nice touch on your F150

The most impressive thing about this video is the generous length of wire for each light. Oh and by the way, wash truck, then polish...not the other way around..lol just kidding. Great video . And nice narration. 2 THUMBS UP

Looks great - very good video - thank you . Now I need to see what I can do with my 2003

Would be pretty damn cool to wire into turn signals

@Hubjeep

7 жыл бұрын

I would like to, but also like when they are on with the running lights. My XJ Jeep Cherokee has a side marker light [low intensity] that is on with the running lights, and flashes when the turn signal is on, which would do both, but the F150 doesn’t have that, it would be one or the other.

@CheapBikeOwner

7 жыл бұрын

+Hubjeep ooo i see

@CheapBikeOwner

4 жыл бұрын

Jeremy Hess I never knew that. Thank you

@garyr7027

3 жыл бұрын

@Jeremy Hess you can't push 24 volts in any wire on a vehicle designed for 12 volt output. Two 12 volts does not compute to 24 volts... it doesn't work like that, it's still 12 volts. Also, LED's don't even take 12 volts, LED's are all lower voltage, around 5 volts max. LED's have special circuts that reduce 12 volts down to 5 volts or less... most are 3 volts or less.

@houstonfirefox

3 жыл бұрын

You could certainly do that with a diode spliced into the positive wire and another spliced into a wire from the turn signals. The purpose of the diodes would be to keep the voltage from backfeeding from the turn signals into the parking lights (making them flash) and vice-versa.

huge help and a great detailed video, helped me save money installing it on my own 👌🏽

Very cool and is a great side marker.

My luck i would drop it in sand as soon as i took the 3m backer off

@robnation2475

4 жыл бұрын

or arm hair

nice looking truck those really set it off i need to replace mine on my 2009

3:40 ..you made that whole process look so simple

great pro type job!! these will get more attention then any led light changing kit !!!!!

Those are pretty damn sweet. I think I’m going to have to order me a set of those now

Professional work, I'm gonna do to my 2014 f150 platinum 😂

Looks awesome. Gonna do this to my 2014 f150

those look awesome!! I have that color F150 (crew cab). I want some of those!! Thanks for sharing :o)

Awesome man just what I needed bro 💪🏾

Damn good video on detailed installation of this product!

@Hubjeep

7 жыл бұрын

Thank you!

@thefishchannel48

4 жыл бұрын

Did your fenders come like that or did you roll them

Need this for my f250! Looks great!

Sounds like the birdies really like the light too!

@hotpawke_t

3 жыл бұрын

It's relaxing. Lol

Going to have to get some for my 04 FX4! Looks awesome!

@Anthony-kn8cn

Жыл бұрын

I know this is 2 yrs old but we have the same truck. How is your motor holding up?@ Nick Hart

@germanomora6345

Жыл бұрын

GO E-BAY.

Ford should have this as an option 👍🏻👍🏻👍🏻👍🏻

looks really good!

Wow looks brilliant

Very cool, Wondering if they have one for the tail gate also.

@germanomora6345

Жыл бұрын

TRY E BAY..THEY HAVE IT ALL.

For almost 4 minutes I wanted to scream at you for not using a heat gun.

@DREWTENO

6 жыл бұрын

JerkysBoy fucking idiot huh

@ogCANICA

6 жыл бұрын

Lol my teeth where grinding the whole time when he was pulling that adhesive off

@Maugwa

6 жыл бұрын

Asshat could have skipped the first 7.5 GD minutes of this shit video.

@MaxiiBoii23

5 жыл бұрын

And using a paper towel on dirty paint.

@justingroves9058

5 жыл бұрын

I appreciate the first seven minutes of this video.

Nice work!!!!

You honestly did the most before putting it on

@bigdaddyfluffy_2393

7 жыл бұрын

Good video though

@Hubjeep

7 жыл бұрын

My objective was to show all the steps I took before just "sticking them on". Like painting anything for example, prep is most of the work.

@Hubjeep

7 жыл бұрын

Thank you.

@kevinlivingston9563

7 жыл бұрын

Hubjeep indeed.

@julesx7713

6 жыл бұрын

You like to measure once try twice right? :)

Very nice job

i like to have 2 of those for my f150 were did you get them at

Great video....

That’s cool, do you have anything like that for Ram

Cool bruh, just gave me some pointers for my truck.

do you know how much power each light puts out? I wired a light bar on the front and I have another plug on the harness not in use. I was thinking about running these on my switch so they come on with my light bar. I just wasn't sure how much power they put out.

Looks good!!!✌👍

that shit looks so clean, i need it

Amazing

those are freakin' AWESOME!!!! I want some...my '04 FX4 crew cab is the same color !!!

awesome video thanks!

Pretty Cool Man! Thanks for taking your time to explain!

Wonder if that could be hooked up as a turn signal instead of running light

I just installed an Led light bar on my 06 F-150, the wiring harness comes with an extra red and black. I wonder if this could be wired to my switch so they come on with my light bar. I don't really use my parking lights.

That's cool, all cars need light up emblems

those look good hubjeep. and good job on the thourough intstall. bought em for my 16 f150. they say not made for it but im sure as lightweight as they are, i can cut off the plastic pegs on back if holes dont line up and double sided automotuve tape should keep them up there easily. what you think? great job again..

@Hubjeep

7 жыл бұрын

Thanks Nick. The pegs are only for alignment, the tape is what holds it on, and the tape on the back of these is very strong. Should be no problem as long as you have a hole for the power wire out the back.

looks good

Nice vid, thanks man

badass!

That is beautiful! Good job 👍🏻

I'm not one to do much to my cars, but I have to admit that's pretty bad ass.

I wonder if I can find one for my NITE Bronco.

Makes me wonder if I can’t modify the factory emblem to incorporate an LED🤔

Looks good

Great job love the video work not talking I have a 2017 Ford F-150 xlt super crew can I do that to mine great job

A fellow step side man

Did you think about wiring it in to alternate with the blinkers?

@oviedoroadandwrecker8677

7 жыл бұрын

a friend of mine did with the blinkers, wired right into the ones on the mirror, saved a hell of a lot of wire lol

Ok looks cool and all where to buy it from

Nice job

They are pretty cool looking. You can even change the colors with them now. But $300 is a tad more than I want for a lighted logo. Nice video though. Tell the haters to go blow their brothers (probably doing it already). Recon has some cool lighting options and really good quality but they are expensive.

Love it i have been thinking about getting them on my truck!

So these Recon badges that American Trucks say fit 09-13 but not my 04-08 will indeed install and function properly?

Smexyh AF dude!

That would be nice if you use it for the signal light flasher... nice

These look pretty sick! How do you like the led headlights?

@Hubjeep

4 жыл бұрын

Thank you. The LED headlights are OK, not great. Maybe newer ones are brighter. Projector housings would be ideal.

nice video too

@Hubjeep

7 жыл бұрын

Thanks for the great deal on the emblems! Best price and fast shipping.

Good job

Quick question is it also wired into the turn signal or just the running lights? Looks really good!! 👍👍

@Hubjeep

7 жыл бұрын

I wired them to just the running lights.

@rahmmenon224

6 жыл бұрын

Hubjeep - hi, will these lights look good on 2012 f150? Will it look much cooler if connected to turn signal?

Got my set!!! Whoever pulls up tome asks me about them!! Love them!!

@zacharymundell8508

4 жыл бұрын

Did you get them on yet?

I hate putting different models or year parts on trucks but damn that looks great on your truck

Where did you order the lights from. What did you pay for them

Not a Ford man but I like those. Nice video.

Does anyone know of a shop in the Virginia Beach area that can install this??

Can it work on a 2000 F150? And its a Lariat.

Awesome video bro! I'm an LED junkie and this mod is sick, but....personally, i think the emblems are a little TOO bright. Where did u pick these up?

@Hubjeep

7 жыл бұрын

They look extra bright on camera. Brightness is just right IMO. I got them non ebay, search Brody Dog Auto Parts on ebay, best price. The newest ones may have a controller to change the color.

You have a link for the emblems

I thought it was very well done 👍🏻🇺🇸Friend from Georgia 🇺🇸

Do they make them for the previous generation as well?

I love it I think I'm gonna make mines a turning signal

Looks great but god damn are they expensive

Look nice bro more video 🤙🤙🤙🤙👍👍👍

That's bad-ass!

I wanna buy one of these now holy fuck they cool.

very nice..

@Hubjeep

7 жыл бұрын

Thank you!

Can you send mee the link where you got this emblem

Awesome

When will you have a 2018 style

Nice!!!

where can you buy these for a 2011 f 150? american muscle dont have them for 2011's.

Woo. Nais

Perfect job, you're probably a detailer....

Ohh i found this video..is a beatiful work..clean and very nice..but i have a question..can i do the same on my f150 5.4 Lariat 2006

@Hubjeep

6 жыл бұрын

Thank you, and yes, 04-08 trucks have the same fenders.

@megadom1191

6 жыл бұрын

Ohhh thanks..but buddy..were can i get one...with u video will be very ease put in on my truck..thanks..

Never new the word anxiety till I saw this video