cool to see the functionality of these tail lights, only seen pics online

Thank you for using the blinker, that’s why I came here before buying me a set

Thanks for sharing this video. I ordered them from Amazon, installed it yesterday (by installed I mean plug n play lol). They look awesome. 3 compliments from just this morning. I used led reverse light bulbs from F150leds (I got them as gift from them for a review). Thanks again for the video, it helped me make my decision.

@TruckStuff1

5 жыл бұрын

Awesome, I'm glad you're happy and thanks for your support!

Those look sweet on your truck. Seeing this, I may get me a set now!

Thanks for a great video. I installed my lights and followed your instructions. It went perfectly!

@jessesmith4438

2 жыл бұрын

Great video. Cleaning the are for double face tape would have been better.

Trey. I knew you were from CA before I saw your LP. I would guess out in SOCAL, the San Gabe Valley? I will have to outfit my 2012 F 150 with those rad head and tail lights. Thanks for posting.

Thkz for the video. Very well instructed. I want a set for my 09 f150...thkz again

Use alcohol spray and wipe the area before attaching the hardware

@shawnsturgeon1014

4 жыл бұрын

Phil the Mx M .. Ha! I was telling him to do the same but he didn’t hear me lol

These are cool..may switch my aftermarket LEDs out for these

Those are some nice headlights

Nice truck man, I recently bought one with 8’ bed thinking it was unique but.. nope lol. In time I’ll be upgrading lights and suspension.

Good vid had to like it

I had led's from Recon and after 4 years they were so corroded that they quit working. I hope the Anzos are better. How is the visibility from the rear? I can tell the brake lights are visible but how about the tail lights of you don't brake?

Good looking lights..

Where did you get that adapter boot that you connected the tail lights to?

Very helpful thank you

Sweet truck

I missed it! What happened to the 7.3?

GREAT! Sold me on it bro. Getting these for my girlfriends truck. Thanks

@TruckStuff1

2 жыл бұрын

Love it! Use the link in the description and I get a small % of the sale to help my channel. Much appreciated 👍

I like it brother, looks good as well good job.🇺🇸👍

@TruckStuff1

3 жыл бұрын

Thanks man!

After my years of being a automotive tech im not much of a ford guy at all, I like trucks that run. But they make a sharp looking truck. Ane a great video as well

@billierenfro705

3 жыл бұрын

That’s funny. I’ve had my F150 for 6 years and not had one single problem so far.

@roxastherogue

3 жыл бұрын

@@billierenfro705 man six whole years!? Oh my is that even out of warranty yet?

@billierenfro705

3 жыл бұрын

@@roxastherogue I’ve had a GMC and Silverado and had a bunch of problems out of the GMC and a few on the Chevy Silverado. To each their own, I guess.

@roxastherogue

3 жыл бұрын

@@billierenfro705 hey if you can do what you need to do, I'll cheer you on all day. Its not my place to judge. But really 6 years and no issues?

Nice lights!

Trey, how are they holding up?

I'm dying to get these! *edit: 6 days after commenting this, I got them! lol.

@steveeab2364

3 жыл бұрын

How have they held up?

look good

They looked great! I'm looking into a set. Do you remember what size tires you had?

@TruckStuff1

4 жыл бұрын

They were 33s. But I don't remember more than that

How are those Spyder headlights working for you? I have Spyder halo lights on my Ranger, but after about a year the protective coating is peeling off, making it look pretty bad up close. Have you experienced that on your headlights? Axial makes the same style light but are more expensive so I'm just trying to avoid having that same problem on the F150 I'm buying soon.

Does anyone know what the tail lights look like while driving ?

Those resistors will be bouncing around in there after a few years.

Nice I'm planning on getting the same lights for my truck. It's good to see they don't hyper flash. Have you had any problems since this video

@TruckStuff1

4 жыл бұрын

Nope. Been all good

@tecolote911

4 жыл бұрын

Truck Stuff where or how I can get those lights ?

@ottallman

4 жыл бұрын

No condensation issues?

Hey are these still working for you, lots of complaints out there about them dying out after a few months or from water damage

@1tocpc

6 жыл бұрын

Be sure to twist the bulb sockets into the housing of the tail light rather than letting any and all rain/snow in.

Hey, any chance you could comment on the fit? I just got these and like them a lot however, one of them (drivers side) doesn't quite seat all the way even though all the holes line up. There's a 1/8" gap or a little more where you can see behind the tail light if you get up close. I noticed in your video that the drivers side didn't "click" into place and you gave it a few hits with your hand. Lemme know if you could. Thanks.

@TruckStuff1

5 жыл бұрын

I seem to recall a slight fitment issue, but nothing big. Just an imperfect body line.

Wish they had those for the 04-08

@zachshipley1689

3 жыл бұрын

Do they have somethin similar??

should of cleaned it off not just wipe the dirt

@derekfeltham8751

5 жыл бұрын

Have. Should have...

Do they still work fine? Didn't have any condensation or water in them after a year? I'm looking forward to buy those.

@TruckStuff1

4 жыл бұрын

I no longer have the truck, but after a year I had no problem.

As well do running bars with lights

Can you send the link for the headlights you used? Thank you. The tail lights are sweet!

@TruckStuff1

3 жыл бұрын

Sure! The ones I have are Spyder, but ANZO makes some too! amzn.to/2nOcPRQ

Thank you very much i like it 😍

Amazon says it doesnt fit a 2014 ? Who to trust?

OMG, i was wondering till now if I was the only one with these tail lights.... :) Glad to know i'm not. They are great, after 1 year still looking good. The driver side doesn't fit too well, but not bad

@jakethequadrunnersnake642

5 жыл бұрын

There will b 3 of us here soon lol I just bought a 13 Ecoboost and I’m getting then soon as I can

Ik it’s been like two years but did these leak any water I’m thinking about getting them

@TruckStuff1

2 жыл бұрын

No leaking ever

I have a 09 Ford platinum you think this will all fit for me like it fit for you

@juan23775

5 жыл бұрын

Yes

So headlights and tell lights or aftermarket but yet that third brake light is Factory you need to get the third brake light

@HETPEZB

3 жыл бұрын

There are no legit third brake lights available. Some looks shady to begin with. Other looks cool but cargo light doesn’t light up the cargo area (read useless) it points to the sky.

where I can get this tail lights for my ford 2014?

@TruckStuff1

4 жыл бұрын

amzn.to/2nOpYKT

You've had these a while now, what do you think?

@TruckStuff1

4 жыл бұрын

I don't have the truck anymore, but they never gave me any problems

I bought a pair of them and my break lights didn’t work with them. Kept on faulting the BCM. Then i didn’t have any turn signals either. I’m not talking about hyper flash either. When clearing the codes and changing back to stock haven’t had the problem since. Pissed me off on the fact of buying them cause they do look sick but just can’t use them

@TruckStuff1

3 жыл бұрын

We're they ANZO brand? They may have just been defective, it shouldn't do that

Update please?

Would last one winter here in Canada. The bulb plugins are open to the elements. You would be better off to cut and heatshrink the wires together.

@1tocpc

6 жыл бұрын

Very true. I now have water in my tail lights because you failed to mention that the bulb sockets twist in to the housing of the lights... Super cool. Not.

@Leviathane

6 жыл бұрын

Craig Campbell it's not his fault you didn't know what you're doing

@DoctorRickSanchez

6 жыл бұрын

Craig Campbell Wasn't even Trey's fault...It's yours for not reading the provided directions thoroughly and now you have messed up tailights. Shouldn't even need directions if you know what you're doing but apparently you didn't lmao.

@syoung20001

6 жыл бұрын

Craig Campbell I hope you’re joking. If you don’t know to twist the bulbs back in their socket, you didn’t pay attention to how you disconnected and probably shouldn’t be doing this yourself

@zurkeyturkey7636

5 жыл бұрын

@@1tocpc hahahah thats the funniest shit ive read inawhile. People really are stupid huh

Hows the waterproofing on these? Do i need to run a bead of silicone around them?

@TruckStuff1

4 жыл бұрын

I never had any problems, but it wouldn't hurt.

@kaiseralbrecht6099

4 жыл бұрын

@@TruckStuff1 hey thanks for the follow up. Im glad you havent had any problems over a year after having them. I think i will run a bead just in case.

Loooks 👍🏻

Have you had any issues with them filling up with water?

@TruckStuff1

4 жыл бұрын

I don't have the truck anymore, but in the year or two that I had the headlights, no I had no issues

@turo669

4 жыл бұрын

I was told to put a small bead of silicone before install to be safe.

Did U Have Any Issues With Water 💧 Condensation

@TruckStuff1

4 жыл бұрын

Nope. Never did.

روعه

Are they still working? Any moisture/water in them?

@number4777.

5 жыл бұрын

Truck Stuff thanks. Having hell of time with LED tail lights keep getting moisture (blown LEDs) or resistor issues (rapid flashing).

@number4777.

5 жыл бұрын

Truck Stuff last set were VIPmoto. Looked great but filled with water in first month.

@number4777.

5 жыл бұрын

I can’t believe so many of these manufacturers stay in business with so many poor sealing issues. With halogen not such a big deal but moisture kills LEDs quickly! How hard is it to seal the damn things. I found another set I like the look of and waiting on seller to tell me if I can take apart of if he will ship to me with lens not attached. I will seal it myself with marine sealer and then feel confident good to go for many years. Wish me luck.

Put your twist lock the old bulbs were in back in the housing

Can you tell me where to buy it?

@amadeusmaulupe1911

6 жыл бұрын

@alfredo acuna carid.com

Did you have a gap in the lense just installed them on my truck and the quality is terrible

@TruckStuff1

3 жыл бұрын

I did not. Did you get real ANZO ones?

@TruckStuff1

3 жыл бұрын

Where is the gap

Put led kits and foglight and as well led 3rd brake and license plate lights

@devildog2051

5 жыл бұрын

Sounds awesome! I would like to see some pictures.

How much did you pay for them? Just for comparison sake.....

@FloridaSky

5 жыл бұрын

They're around $198-210 on Ebay.

force scan??? just buy led equalizers at auto zone for your blinkers flashing too fast

@TheDriver21122001

3 жыл бұрын

LED equalizer? Umm Load Resistors......

@scottyodell860

3 жыл бұрын

@@TheDriver21122001 yes tool

These look like they actually belong on the truck and were factory.

Plug and play?

@TruckStuff1

5 жыл бұрын

Yep! Plug and play!

Bruh u were supposed to put the plugs into it like they were on factory with the bulbs. It's a seal

LOL dude a couple of glaring errors there ya numpty! First you need to clean off any areas you are using adhesive tapes, a good clean and then alcohol! Secondly the sockets that the bulbs used to fit in but now have the connectors need to be mounted to the new housing like they did to the old, you dont leave them dangling and have gaping holes water and dirt can get in!! Take your lights off and use the bayonet mount to clip the bulb holders where they go!!

And what you shoulda of done is show us the difference with the originals on (first, BEFORE YOU TOOK THE ORIGINALS OFF). Then show us your REPLACEments afterwards.

@TruckStuff1

3 жыл бұрын

If you need to see the factory originals you could always look at your own truck.

there's only 3 LED's one at the point and one on each leg of the backwards "C" shape. send em back... ESPECIALLY FOR $350.00!

No limpio bien el área donde coloco la pieza.que mal

don't you think you should have clean that off with some alcohol before sticking those boxes in there LOL

@TruckStuff1

3 жыл бұрын

Probably. But they've lasted years anyway.

Listen I can tell you right now in a month or so you're going to be hearing some rattling going on in the back of your truck and those resistors are going to be bouncing around because you didn't bother to clean the surface that you're trying to stick them to just saying.

@TruckStuff1

4 жыл бұрын

You're not the guy person to point that out. But these were on for a year with no problems. But you're right, I needed to clean it.

You breathing killing me. Star make some exercise 🤣

Nothing like scratching the hell out of your nice new lenses. Not preping surfaces, for the ballasts. Glad your not a professional installer

@derekfeltham8751

5 жыл бұрын

He's not a professional, just modding his own truck in his driveway. Moron.

I jus don't like these, them plain leds that are on should be the stop lights, and them BUNCH of leds on should the tailights, I'm jus saying.🤢😳👎 No good.