I deeply appreciate this video. My headlight went out recently and knew youtube would have the exact angles. Your directions and footage are clear and concise. I fixed the issue all for the cost of the parts. Thanks for your money saving tips.

@Tunnel_love

9 ай бұрын

😢😅😊😊😮😮😅iiiiiiii😊😊😅😅😊😅😮😅, 😊😅😅, 😅😮😮😅😅😊😊😊😅😮😅h0😊😅😊 5:48 😢h😮 5:48 b k 5:48 8

Thanks Chris, ur a real life saver lol, I couldn’t get my lights out in my Mazda, cause they were stuck and I didn’t know there was another clip hidden. Thanks again

Chris your videos have helped me keep my 1999 Mazda B300 on the road. Thanks. Last weekend a stone hit my driver's side headlight. After fighting for 15 minutes trying to remove the bottom connection. I discovered that a 5/8 six-point socket fits on perfectly to depress the tabs. Thanks.

As always thanks for your great videos and instructions plus details. You do a great job Chris. You do your parents proud!!!

Your timing for this is impeccable. Waiting for the aiming guide!!

@chrisfix

9 жыл бұрын

Korey Moore Haha, perfect! Thursday the headlight aiming video will be published so stay tuned!

Very helpful video! Thank you very much! 👍

Excellent explanation. Clear, detailed, well done.

Dude I have a b2300 ..2006...just in an accident..front end...replacing both lamps...THIS WAS SO HELPFUL.....THANKS.

Hey Chris, I'm a new subscriber and I really enjoy watching your videos. You make the tasks which otherwise are intimidating look easy. I've tried it on my car and it works great. Especially super cleaning my car. Good job😊😊

One of the things that sets your videos apart is the excellent picture quality. It's much better than a typical video made with a cell phone that's fuzzy and jumps around. What kind of camera are you using and how do you keep the camera so stable?

@chrisfix

9 жыл бұрын

Victor Sorlie Thanks Victor. I have a Panasonic TS3 and it has image stabilization. I also edit the footage extensively for image stabilization, sharpening, contrast, color, etc.

@Zeppelinlv2007

9 жыл бұрын

ChrisFix Whatever you're doing to make these quality videos, keep it up. People like us appreciate quality youtube videos that doesn't mainly rely on gimmicks.

@chrisfix

9 жыл бұрын

Zeppelinlv2007 Thanks! I will definitely keep it up and I try to get better and better! New automotive videos every Thursday and most Mondays so stay tuned!

Thank you!! Awesome video!

Thanks Chris !

Thank You! Thank You! Thank You! That helped me tremendously and saved me money! Thanks again for your help!!

This was super helpful!.thanks for posting!!

@chrisfix

9 жыл бұрын

Hazle kin No problem! Glad the video was helpful!

Great Video! I subscribed to your channel

Thanks again Chris. I sure learn a lot from you.

@chrisfix

9 жыл бұрын

BAYOUMAN No problem! Glad you are learning a lot!

Chris I really enjoy you're videos. good job brother. I also appreciate you responding to you're comment.

@chrisfix

9 жыл бұрын

Emin HVAC Thanks man! I am glad you are enjoying my videos! I try my best to respond to all comments and questions! It is all part of the learning process to be able to ask questions!

@EminHVAC

9 жыл бұрын

ChrisFix thank you for your great efforts

I need to give back to the community as well I never record me fixing stuff but I will soon we all could use extra help between all of us it's helps a whole lot

Ur voice sounds familiar thanks I believe I watched some of ur videos ur a good fixxer upper sir

tx GOOD work KEEP it UPPPPP

@chrisfix

9 жыл бұрын

art obando Thanks Art!

Looks awesome Chris! My 1995 Accord coupe requires me to remove the front bumper cover and rebar in order to replace the headlights. What a PITA! Took me over a damn hour and a slew of broken clips. But they look great.

@chrisfix

9 жыл бұрын

aquateen77723 Wow that is crazy. Did you see this video for next time: kzread.info/dash/bejne/h3l-xK2Fipq4nbA.html

Perfect, as usual

@chrisfix

9 жыл бұрын

Hassan Ali Thanks Hassan!

Great video. I broke my hubby truck lights. I do I change the little orange one next to the one YOU showed in the video

Do you have or could you possibly make a video on how to replace normal headlight bulbs with LEDs? I wasn't able to find it if it already exists. I would like to do this if it's possible once I go through some of your other headlight related videos. Lol. Appreciate your content, very high quality.

Hi Chris, i was not able to find the link to the parts, am i missing something? Thank you for your help as always.

Chris how do you replace rear view mirror outside temperature gauge thanks bavid b

Chris, are those new head lights from parts max? If yes are they the same one you used for the crown Vic in the project police intercepter episodes?

hey I have a b3000 2006 was looking for same lamps as mime as DONE were did u buy yours I can't find them for less than $200:( great video tho really helped

Good afternon Chris I have a question. I dont know if you can answer but here we go I have a 98 Mazda B1500. I' m trying to fix it up little by little. Do you know if the Ranger 98 headlights are the same. Any information can help, by the way thanks in advance.

Chris did you push on the headlight to help remove the retainer clips? The reason I'm asking is mine (99 B4000) are incredibly tough to get out. I've tried pliers, needle nose pliers, snap ring pliers on the holes and have had no luck. I finally got one top clip to come off with much force and a regular set of pliers. I ordered a T-handled hook for removing brake springs and clips to aid with the removal, and am waiting for it to come in but darn! These things are really secure. That's why I'm asking about pushing on the front of the headlight. I haven't tried it yet but I suspect that might relieve some of the tension. BTW, my retaining clips are not rusted to the body as they will move (spin) with force in place. The reason I'm removing them is I purchased replacement headlights and side marker turn signal lenses. TIA for your answer.

Hey Chris, i got a 98 ranger. I needed to see how to change them. thanks. Question, my driver side assembly had the 9007 bulb (brightest white, worth 45 bucks) the bulb melted and blew apart inside the assembly. I checked fuses, theyre ok so im lost any ideas? And where did you buy the replacements from? Can u provide a link?

Beutiful intro🙏🙏

Those new headlights look stunning

@chrisfix

9 жыл бұрын

Chris Thanks man! They really look great and more importantly, have great light output!

@stephenverchinski409

3 жыл бұрын

Looking at the xenon bulb upgrade as well.

There’s no other videos on how to do these specific trucks headlights so thanks for this 😫 I thought it’d be as simple as two tabs like other fords but I guess they switched that factor out lol

@chrisfix

3 жыл бұрын

Of course! And I guess they did lol

@theshayanmalik7

3 жыл бұрын

@@chrisfix dude you're so awesome for still replying to comments from vids from 6 years ago hahah

Hey Chris. Huge fan! I have a 2007 Volvo S80, and the low beam bulb died. I got a replacement, installed it, double checked, and it’s still not working despite it being a new bulb. Would love your help! Thank you.

Hey ChrisFix, you wouldn't happen to have the old housings anymore would you? Or at least one of them?

Where did you order your headlight assembly from?

***** You will see in a future video! It was worth the mistake ;)

@BritHull

9 жыл бұрын

ChrisFix​ are those stock bulbs or aftermarket?

@chrisfix

9 жыл бұрын

Stock bulbs. I am going to do a projector retrofit soon with aftermarket bulbs!

@BritHull

9 жыл бұрын

Sweet can't wait. Keep up the good work!

@chrisfix

9 жыл бұрын

Brit Hull Thanks man! I cannot wait either!

Thank you for posting these videos. They're very informative. Can you tell me where I can find the vertical adjustment screw? I have a 1996 Ford Ranger and this particular part is discontinued. Thank you in advance

@chrisfix

9 жыл бұрын

cam4671 I would go to a junk yard.

I got pulled over bc of the head light being out due to a accident my mom had so this is helpful for me to do it myself

Where did you get your new headlights? All the ones I find are rough and bumpy on the lenses, I want the smooth ones like these in the video

Two ways to change a headlight: 1) Do exactly as Chris shows here - go have yourself a beer. :) 2) Get carried off to the local sanitarium because you spent the last 2 hours screaming on the driveway because you bought one of those cars which you have to take off the entire front clip just to get to the headlight....!! Not that I'm speaking from experience or anything...heheheh... Um...good video btw. I need to go sit down apparently...

@chrisfix

9 жыл бұрын

GammaCruxis hahaha yea some headlights are a real pain! I cant imagine what the engineers were thinking when they came up with taking a front bumper off to change a headlight bulb!

@stephenss7004

5 жыл бұрын

ChrisFix *cough* Honda Accord *cough*

@venividivici4253

4 жыл бұрын

Heart Breaker Chevy Malibu *cough*

Where did you get the new headlights, the ones on my ford ranger are CRAP, I drive with high beams and it looks like a dim low beam

I missed the source info for LEDs that you showed recently, I have seen them around, but they want too much money. I think you have contacted me before, I would be so thankful for that LED source info. It's time to obtain some for my ride, and my customers, Thanks for all the neat tricks, James

@chrisfix

9 жыл бұрын

James Fenton If you ever need what part I used, the link of the part or tool will be in the description (something new I am trying). As for those LEDs I used for the license plate in this video: How to Install LED License Plate Lights (62 cents a bulb) I used these LEDs: www.amazon.com/gp/product/B00EPA7BXU/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B00EPA7BXU&linkCode=as2&tag=chri0e2-20&linkId=PGHUPS2AJE5IJW2L And if I do not have a link to a tool or the part in the description, just comment and let me know and I will put one in there for you!

Bello Christ. My headlights went off a the same time. Can you give me a clue for solving my problema? Thanks Chris.

The way to change a Ranger headlight is actually a little bit different from this.(I was restoring them using ChrisFixs headlight restoration vid ;)) I was actually surprised when I got to headlight because it did not have the little bolts with a clamp but rather two large clamps of each side that just need pulled up then the headlight is unlocked, a little easier than the b3000 since you don't have to go under the truck xD great video nonetheless

They look fantastic :-)) well worth the money :-)) One addition, you could have measured the threded section of each adjuster and wound the new ones to the same spot roughly, makes them closer and quicker to align in the next video :-)

@chrisfix

9 жыл бұрын

zx8401ztv Thanks for the tip! I would have definitely done that, but my old headlights were off so bad, it would have made it worse lol. These came pretty close to the correct alignment from the factory which was pretty sweet! Good idea for other people though! Thanks bud!

@chrisfix

9 жыл бұрын

zx8401ztv No, that is a good tip I didnt mention. I was just explaining why I didnt do it lol. I really enjoy your suggestions and ideas so keep them coming!

@zx8401ztv

9 жыл бұрын

ChrisFix I am pulling your leg chris lol :-) But you know that :D

love the HF lights. i had a pair forever on my 96 ranger. but i was glad when i swapped to leds

@chrisfix

9 жыл бұрын

gunner9174 Yea man! For $30 a pair, you cannot go wrong! I want some LEDs in the front as well!

@gunner9174

9 жыл бұрын

they make kits where you can make your own quality led bar/ pods. it saves you half the money and it's better than the chinese ones on ebay. but i shopped around and found a deal that got me 4 4led pods for $50 + $3 for shipping

@chrisfix

9 жыл бұрын

gunner9174 How do they work? Do you like them?

@gunner9174

9 жыл бұрын

love em. they're aimed slight;y down about 15 degrees. but they go farther and brighter than the brights of the headlights

@chrisfix

9 жыл бұрын

gunner9174 Ill have to check it out!

What’s the company you ordered the headlamps from?

Do I have to take the front bumper off on a Holden Astra?

Hi Cris would you please show me about jaguar s type 2001 headlights bulb changing on high beam side with thanks

One tip, is, if the old headlamps are well adjusted, turn the adjusters to match the old headlamps, this gets them in the ball park for easier and quicker aiming.

Can you tell me what exact headlights these are and if they would fit on a 2002 ranger?

@dongemmell5446

4 жыл бұрын

OE Replacement Mazda Pickup MA2503113 Pass MA2502113 Driver on Amazon

0:04 i was thinking this was an old video by chrisfix but untill you took off the old headlight i didnt say single word

Are the headlight assemblies recyclable?

My cars headlights are really weak, even with brand new bulbs. Could it be the reflectors yellowing/darkening? The lenses are glass so they're not hazy or anything. Or maybe i'm just using bad bulbs? They're some Philips H1 bulbs that cost 3.5€...

This wasn't helpful to me, because I don't have Ford Mazda B Ranger :D But I gave the video thumbs up anyway :D Great vid as always!

@chrisfix

9 жыл бұрын

February Thanks man! Yea, this was a little specific but the headlight aiming video on thursday is universal!

@February54

9 жыл бұрын

ChrisFix That should be exciting! Can't wait!

@asgardgodsgaming

4 жыл бұрын

@@chrisfix Link for that vid plz

where did you buy the headlight?

Just curious Chris, are you making a video on replacing your head gasket replacement on the Chrysler PT Cruiser? always wanted to know how its done from someone who actually makes quality how-to videos.

@chrisfix

9 жыл бұрын

Mathew Banou I was not planning on doing a head gasket video becuase that engine needs a lot more than that lol, but it might be a good learning opportunity. Hmmmmm, now you have me thinking!

I just changed out the headlights on my 04 accord. It was a huge pain, had to take the front bumper off just to get them undone. Hopefully these new lights last longer than the car itself because I’m not wanting to ever do that again

I'm looking to get new headlights for 2005 C240 Benz, I don't think the process to install the headlights is as easy as yours.

Thanks! My brother's car head light died, so only 1 headlight was on at nighttime

Do you have any idea where to find some aftermarket headlights for this model truck?? I have a b4000 and I can't find anything but factory.. I was wondering if the 97 ranger headlights would fit the mazda

@Fsilone

4 жыл бұрын

Ranger and B Series front ends are different. Would have to do a front end swap all the way to the fenders.

Hi chris you should make a video on how to replace the front turn signal/marker lights bulbs for the same model truck you have i've tried for a couple min but gave up after a while i was trying to swap the stock bulbs to led's

@MrMe-qu4gw

7 жыл бұрын

Watch his vid "how to replace blinker fluid" he shows how

@Alfaqmi

7 жыл бұрын

Mr. Me lol

@tunakpreston8240

6 жыл бұрын

Make sure you get a resistor or switch out your stock flasher relay for an LED capable one, or your blinkers will be on hyper flash mode.

Do you know if aftermarket 98 ranger headlights would fit in a 98 Mazda b4000? There really isn't any options for aftermarket Mazda headlights besides oem.

@chrisfix

8 жыл бұрын

+Isaac Niles I am not sure but I do not think so.

CHRIS HEEEEELP !! i have a 02 b4000 and im trying to change the turn signal bulb how do you do it !

@Fsilone

4 жыл бұрын

Watch the blinker fluid video. It shows how to change the front turn signal bulbs.

you should make a video: how to retrofit a pair of projector lens into an OEM headlight housing. This gives it a nice cutoff line so you won't blind oncoming traffic. I've done it myself with D2s projector lenses. so much better than reflector styled headlights.

@chrisfix

9 жыл бұрын

hawaiianflavor69 That is actually exactly what I am going to do lol. I am working on getting projector lenses and figuring out how to make the video(s). Thanks for the suggestion.

great video, wish my b4000 would give up the headlights. the clips are so stuck that 2 of the tabs you clamp on ripped off completely. ordered new tabs and I'm gonna melt/ cut/dissolve the plastic bits

@Fsilone

4 жыл бұрын

I've had the same issue. Haven't busted them yet, but they're stuck bad enough, I'm afraid to Hulk out on them. Thinking of trying snap ring pliers for it next.

And what were you doing with the heat gun?

Hey Chris, I know this is an old video but I was wondering what is the name of the new headlights. The ones I have found are around $189-199. and Do Not come with bulbs in them.

@chrisfix

Жыл бұрын

Look up "DEPO Mazda B3000/Ford Ranger Headlights" and the ones I got should show up

@winnerscreed6767

Жыл бұрын

@@chrisfix Thank you for the reply

Why can battery be left plugged/connected this time? I don't get it.

I have an odd issue. I ordered some headlights for my 98 Mazda B2500 SE and the "star adjuster" on it is not a star at all but a circle. Any idea how to get the dang things to work on my truck. Ironically it said it was compatible with my truck,, what a joke.

@mattwolice9741

3 жыл бұрын

Same problem I have! I just bought a 2003 B3000. The dude who sold it to me replaced ONE of the headlights and gave me the other new in the box. I thought "that's silly; why would he buy the pair and only do one?" I found out exactly why after screaming and cursing in my driveway like a madman for an hour trying to work the plastic/rubber things through to get the clips on. Cheap made-in-tiawan-brand crap! I walked away once it started raining, which might have preserved what little sanity i have left. Looking at OEM Mazda stuff now at $200 a pop!! $400 for two headlights!!!!!

hi chris , Firstly keep on the good work . second , could u do a video or an explanation about a bad Variator ?

@chrisfix

9 жыл бұрын

TheKoderius I dont have any VVT engines unfortunately. What specifically do you want to know?

@TheKoderius

9 жыл бұрын

i live in israel and own a alfa romeo 156 2001 2.0 ts -selespeed with 180K-km on it. engine had an overall in February. i dont know if u r familiar with this car model -anyways , i get this engine jerk+hesitation every time i live the gas pedal at around 3000 rpm. i dont know if its an engine mount \ transmission mount or a faulty variator . i know its hard to diagnose through the internet - just maybe u had an idea what else to check.thanks!

@TheKoderius

9 жыл бұрын

by the way - where r u from in the states ? what kind of accent is that ?

@chrisfix

9 жыл бұрын

TheKoderius Here is a video on how to check engine mounts: How to diagnose a bad motor mount or transmission mount Watch that then test your car out. Does it only happen in drive or can you do it in neutral too? Any check engine lights? I am from the New York area.

@TheKoderius

9 жыл бұрын

ChrisFix hi thanks for your replay. it doesnt happen in neutral or when car is parked . The hesitation happens AFTER i get the foot OFF the throttle . it can happen in 2nd gear or 3rd as well . when i press down the pedal car is responding well. when i LEAVE the foot - car seems to choke and jerk for about 1-2 sec. +my gas pedal is soooo soft i can literally drive it with my pinky toe .:)

2:55 Broke the clip

I have a 2002 Mazda B3000. Clips look about the same, however, I haven't been able to get the clips off. I've used a lot of pressure too and I'm getting no-where. Any other tips?

@chrisfix

9 жыл бұрын

A Geek Dad I mean, what you saw is what I did. You can use a needle nose pliers to help pull.

At 6:25 I started typing the alignment question and then you added it to the end. I should have known you would not skip that... :-)

@chrisfix

9 жыл бұрын

***** haha, of course! I didnt want this video to be too long and there is a lot of neat stuff to talk about when adjusting headlights so I will be fliming and editing for Thursdays release!

OEM vs Aftermarket?

Can you send me a link for these lenses I have the same exact truck I can’t find them anywhere

@Fsilone

4 жыл бұрын

Rock Auto

Is it the same process for the tail lights?

@Fsilone

4 жыл бұрын

Nope. Tail lights come out with a Philips screwdriver.

Man, I wish it was this easy for my car! Damn japanese cars haha

@chrisfix

9 жыл бұрын

CodysDesigns Yea, sucks when it is complicated! Especially since a light bulb doesnt last forever!

@CodysContent

9 жыл бұрын

I have to take off my bumper to take it off, or even change the bulb. However, there is another way I changed my bulb but it was such a pain

@chrisfix

9 жыл бұрын

CodysDesigns Unbelievable!

To the point on the video but my question is do you have a video on the side lights how to redo them

@chrisfix

5 жыл бұрын

What do you mean redo?

@davidvela199

5 жыл бұрын

@@chrisfix maybe I should have said replace the side markers on a Mazda B3000 04

@davidvela199

5 жыл бұрын

Where the front turning signals are

Are there small enough vacuums to fit in a headlight bulb hole in order to suck up broken glass? Example would be if the headlight were removed, and then the bulb, so that just the casing is off with the hole being easily accessible. Or should the whole headlight be replaced? The lenses look fine, it's just a broken bulb inside it. Any help will be appreciated.

@chrisfix

9 жыл бұрын

Spektrum There are a few options. You can take the headlight out and shake it as you try to vacuum the pieces out and make them fall into the area of the vacuum. You can also do this: kzread.info/dash/bejne/hoyqpM2BnNqql6Q.html

@spektrum7434

9 жыл бұрын

ChrisFix Thanks for the help. I'll try the shaking method first.

Chrisfix there are few common fixes people would like to know how to fix like < fixing the side mirror of a car or the rear mirror as these glues in the auto shops don't really work and how to refabricat the car celling in old cars or the doors fabric

@chrisfix

8 жыл бұрын

+Faleh alarabi Good ideas!

My blinkers stopped working along with my hazards earlier today. When I put on my turn signal (both ways) i get no clicking and no arrow on my dashboard, also when I put on my hazards I get no flashing lights. Could this be my blinker relay switch?

@McPePsii

8 жыл бұрын

+McPePsii just replaced my flasher relay and now my hazards work but not on the front passanger side. cant seem to figure this out

@chrisfix

8 жыл бұрын

+McPePsii It could be the multi-function switch as well. Check the bulbs to make sure they are good. Also check the fuse.

@McPePsii

8 жыл бұрын

+ChrisFix the bulbs are good, after i replace the relay i took a test drive and my turn signals began working and my hazards aswell, however on my drive home my blinkers stopped working again but my hazards work fine now.

@McPePsii

8 жыл бұрын

+McPePsii fuses seem good aswell, and brake lights work fine. Just my turn signals. But my hazards are strange, sometimes i turn them on and only 1 side works.

Hello Chris. why you are not using LED headlight ? is it official in your state?

@chrisfix

9 жыл бұрын

Camry le You need to run projector lenses to use a brighter bulb, I am doing a projector retrofit on the old lenses and making new lenses. Dont worry, there will be videos of everything!!

@camryle5590

9 жыл бұрын

ChrisFix That sounds good. I'm waiting

@scorpian8867

9 жыл бұрын

Camry le LEDs are actually really hard to use as headlights. The problem with LEDs is that they LOOK bright, but they actually aren't. In terms of light output, the original halogens often tend to be brighter, even if they don't look like it. If all you need is to make a lens look brighter, LEDs are perfect. Not the case with headlights. It's the light OUTPUT that matters. High-power halogens have quite a bit of that, and the reflector is specifically designed to aim it into usable light. LEDs don't handle heat very well, so feeding more power into them is really hard. The setup needs strict power control and convoluted heatsinks, which usually makes them really freakin' expensive. It CAN work, but it ain't pretty. That's why xenon bulbs tend to make better HIDs.

@camryle5590

9 жыл бұрын

John Roddy Thanks for all of these informations. very helpful

@bladder1010

9 жыл бұрын

ChrisFix Oooh! Interesting!

High light

lol little carried away with heat gun...I replaced mine to but man having a hell of a time getting them adjusted tho. 01 ranger has long metal bars you pull up on each side to release so little different then mazda.

@jasonbilow2877

9 жыл бұрын

Throw some Sylvania ultra bulbs in it next, put some in mine and they are brighter. HID's would be nice to.

@chrisfix

9 жыл бұрын

Jason Bilow Yea, these are a pain to adjust. IDK who has a 4mm wrench lol. I am going to end up using a narrow tip vice grips.

@jasonbilow2877

9 жыл бұрын

ChrisFix here ya go lol www.ebay.com/itm/Lisle-14540-Headlight-Adjusting-Ratchet-for-Ford-/171530786026?pt=LH_DefaultDomain_0&hash=item27f00814ea

@chrisfix

9 жыл бұрын

WOW! I wish I had that for my other video on how to adjust headlighs. Figures they make a special tool for it! Thanks Jason!

@jasonbilow2877

9 жыл бұрын

ChrisFix Saw your video earlier, I need to do it next! Sure is a lot to get these things adjusted lol.

Looks great. Did you use a headlight assembly from Mazda or after market. The reason I ask is that one headlight reviewer on another website said that aftermarket headlight optics are not up to par with original equipment. For my 2006 Honda Accord I can get right and left headlight assemblies off Ebay for about $85 and claimed to be OEM, but from auto parts stores they start at about $230 for both assemblies. Of course dealer price is over 500 for right and left retail, discounted to about $360 at HondaPartsNow.com. The Ebay of one seller says they are OEM, but I know there are several definitions of what that means. I know I have gone off the restoration subject to a large degree and I'll understand if you don't want to get into all that.

@chrisfix

9 жыл бұрын

BAYOUMAN I went aftermarket because the original equipment was something like $250 each! I wouldnt buy them off ebay, I would try a reputable parts store that has a warranty such as *****. That is where I got mine! Ebay OEM is some guy who cannot speak English saying they are oem so he can sell them. Ebay is good for somethings, but aftermarket headlights has always been a bust for me and my friends. You might find a good pair of used Honda headlights from a scrap yard or something on ebay.

@bayouman7658

9 жыл бұрын

ChrisFix Thanks Chris I appreciate your advice.

@chrisfix

9 жыл бұрын

BAYOUMAN NP man! Also, if you cant find any headlights that are cheap enough, it might be worth the risk on Ebay. Just gotta think about it. Lets say the ebay headlights last you 5 years while good OEM lasts you 10yrs or so. If the price is half, then it might be worth a shot. Obviously you wont know how long ebay headlights will last, but maybe you can find one with a warranty... Just food for though!

@kentmocc

9 жыл бұрын

Chris got aftermarket headlights from a company called "DEPO". They are well known for making OEM "Style" replacement headlights. I would say they are one of the best aftermarket companies for fit and finish. But yes, actual OEM equipment is always best.

@chrisfix

9 жыл бұрын

kentmocc Good to know!

Put some 6k HIDs Chris

@chrisfix

9 жыл бұрын

israel 20 Soon, I need to do the projector retrofit first. I dont want to blind people with normal headlights. But definitely will be upgrading these!

PS Ihave a 2002 Mazda 2300 p/u any videos for that will help THANK YOU HAPPY VETERAN DAY to ALL >>>>>>>>>>>>>>

@chrisfix

9 жыл бұрын

art obando Great! I have a lot of videos on the Mazda Pickup!

❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤

@firesafetyclass2903

4 ай бұрын

Great video!!!❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤

I wish my 2000 Ford Ranger was this easy. I need Pliers and needle nose pliers

@scottsmith8162

4 жыл бұрын

Nature’s Offspring I’m changing some for a 99 Ranger. Did you find a good video? Thx in advance

How's about a video on how to replace a HL bulb on a Mazda 3? Should be simple huh? It's a nightmare. My GF has one and there is this ridiculous retaining wire that seems impossible to fit. Why would they engineer something like that when a perfectly fine functional system exists already?

@chrisfix

9 жыл бұрын

newcoyote Dang that stinks! I hate when engineers dont think things though! I cant imagine having to take off a whole front bumper to replace a headlight bulb or turn signal bulb. They must know these things burn out!

should you wax new headlights or no?

@chrisfix

8 жыл бұрын

Yes for sure! That keeps them looking new!

@nonmihiseddeo4181

7 жыл бұрын

Should they also be clear coated?

@Zephram2012

7 жыл бұрын

+ChrisFix, for the new housings, should we clear coat them the same as in your restoration video for better aging?

i think i can do this on my own! wish me luck! lol

@warrior8154

4 жыл бұрын

So you did it ? Replying after 2 years ahem*

DEPO assemblies

At least 1999-2004 Jeep Grand Cherokee Headlight lenses aren't too expensive!

Headlights for my Volvo S60 are $350 for a set!! My Saab 9-7x with factory HIDs are even more! $310 for a set! Now I wish I bought domestic.

@chrisfix

9 жыл бұрын

Seth Allen CRAZY! That is when you do this instead: kzread.info/dash/bejne/h3l-xK2Fipq4nbA.html

The passenger side is way harder to get to the lower anchor clip! Definitely not the same on both sidee

Wish we could just go back to sealed beans