Wow people really have some strong opinions on this video!😮
@kevinmatulonis3 күн бұрын
Put your face closer to the battery
@Stefanakos2463 күн бұрын
Heat is the natural enemy of a lead acid battery. It breaks down the binder that holds the plate material together. Most batteries fail because of accumulation of the lead particles at the bottom of the cells which creates a bridge and shorts out the negative and positive plates. This is a natural progress that is only accelerated by Rising temperatures in the battery. By overcharging a battery. You inherently run the risk of thermal runaway. this is a dangerous scenario and can turn a battery into a bomb.
@sleepwalker294 күн бұрын
We replaced the hose from the radiator to the reservoir with clear tubing in the 90s to see if we had rust in the system. Cast iron blocks rust. We did this to the reservoir hose because it's not under pressure. If your engine mount goes that short tubing won't have enough room to move, and might break lose.
@thejdmallstar20105 күн бұрын
Why is it 40/40? Where are the other 20%?
@thestateofreal25332 күн бұрын
Never looked into that. Maybe it bleeds it back off so the breaking isn’t as aggressive.
@WesleyBellamy-dv8dm5 күн бұрын
Why ditch the h?
@SheriffofYouTube5 күн бұрын
Tig welder to battery is a nice touch for your home insurance
@huh01236 күн бұрын
Better idea, buy a real drop in replacement tank that’s 65 gallons lmao what is this nonsense.
@thestateofreal25336 күн бұрын
Better ideas cost more money
@FelixCantu-wm9mk6 күн бұрын
How do you fill it up?
@thestateofreal25336 күн бұрын
From the fuel door first then the top of the tank. There’s certainly better ways to accomplish this so you could fill from the top tank but you would have to run the stock breath to the top tank.
@TheMrjetdoc357 күн бұрын
Ill just buy a new battery.
@landonmadden26317 күн бұрын
Anyone know if the f22 in the base 4th gen is a 5 or 6 rib interested says 5 but then I seen this
@srvctek19 күн бұрын
🤦♂️
@Ragin.Official9 күн бұрын
Nice! How many layers of clear did you use? And did you buff it prior?
@thestateofreal25338 күн бұрын
Two
@pro109drags99 күн бұрын
Did you have issues with the air temp afterwards? I have
@thestateofreal25338 күн бұрын
Nope. Did you buy a genuine oem?
@user-jq9mt7rp3m9 күн бұрын
Safe 100% do not question me 😂
@darylscott330310 күн бұрын
$200.00??? Wow, it only cost me $800.00 to buy a new TIG WELDER. EXPLOSIVE INFO!!!
@thestateofreal253310 күн бұрын
DC welders are cheap haha and if you understand how they work, you would know this will do no harm as it’s meant to be used this way.
@bnghjtyu76711 күн бұрын
Sorry that's not going to work, it's a joke to try to get people to do this. Just runs the battery which is already probably bad.
@troypollonais914311 күн бұрын
Boiling batteries witha tig welder. I've seen it all now. The internet is goated
@charleswittmer247711 күн бұрын
im 79 and buy the emory cloths in a 1 inch wide roll. that is a neat idea though.
@Z71Ranger11 күн бұрын
Your fuel filter is on the wrong side of the fuel cutoff… The cutoff should be before the filter so you can turn off the fuel to change the filter…😂
@thestateofreal253311 күн бұрын
You’re wrong as Coleman placed the shut off where it is so it was accessible from the panel that covers that area 😂
@Altprophet13 күн бұрын
This tubing will expand with heat and pressure, over time it will dry out from the heat and become brittle.
@thestateofreal253311 күн бұрын
How many years will it take? It’s been on for a year now…
@ledzepp7114 күн бұрын
Does this work with smaller like mighty Maxx 12 v 12 ah lead acid batts. Should it turn the welder down to like 30amps?
@thestateofreal253311 күн бұрын
It can work. I would do your research on this process as my video only shows a snippet of it. If you have ever seen those large auto shop jump boxes on a hand truck…these go up to 40 amps
@jeffhamann435014 күн бұрын
Bro, no….. if it’s boiling like that, it’s too hot And it will explode or melt ! The process takes all day. Check your mixture s/b 70% diluted water and 30% acid. Set your welder to about 50 or 60 A, Hook it up and let it sit on there for about 15 minutes. Turn it off And let the battery sit for an hour. Let it cool down. Repeat the process 5 more times. It’s a good hack and saves you a lot of money, but it must be done safely. Don’t risk your health for convenience.
@thestateofreal253311 күн бұрын
You watched a bunch of KZread videos. I can tell. They are just people repeating other people. They don’t know the og ways. Myself and many others in the comments have been doing this since our daddies showed us. I have never had one pop. Besides, big boy shot jumpers run 40 amps through batteries…
@donmiller488515 күн бұрын
I use the harbor freight Viking battery charger tender it's saved six or eight batteries thus far
@jlkulbacki16 күн бұрын
Meh Just get a drag up tank
@mrmidnight3216 күн бұрын
This dude is ganna be a land lord someday 🤣
@deansteadman537317 күн бұрын
Hold on a minute i thought that this could cause it to explode??
@chuckgladfelter18 күн бұрын
Boiling battery acid produces hydrogen gas. It's very explosive.
@gavinsmith246518 күн бұрын
😂how do you know if cells have collapsed or not,unless you cut it open,once you have done that you no longer have a battery but a bomb😂😂
@Wretched2JZ18 күн бұрын
A “dumbbutt “…🙈😆… that’s a new one!
@FyaaahS18 күн бұрын
Wtf......
@natccamp18 күн бұрын
I bet you voted for Joe Biden.
@brtecson19 күн бұрын
18 wheeler owner-operator here.. You can get some significant fuel savings by fueling up in the right places.
@Jessersadler19 күн бұрын
that was one of the worse knife hands I've ever seen
@MikeCope-uz5jx19 күн бұрын
I promise you, one spark, and it will go BOOM 💥😂
@williamdesmarais493119 күн бұрын
Great idea if you can spare the space. I bet a set of mustang tank straps would work well in that application.
@sinner-saint36119 күн бұрын
One spark and your done😮
@formosabrowning353919 күн бұрын
You do mean 13.2 Volts right ?
@thestateofreal253319 күн бұрын
Nope, I meant what I said. This process requires you to pulse the battery with amperage multiple times. Each time the voltage should be going up. If it doesn’t you know you have a bad cell.
@w13rdguy19 күн бұрын
Blah blah blah 'splode!
@johnking625219 күн бұрын
I don't think that's how you do that ? Just saying.
@alphaphoenix193820 күн бұрын
Cap
@kefwals872220 күн бұрын
This may work. But hell only buy himself a few more months out of it if hes lucky. If the lead plates arent so far gone. And you can descale the plates enough to hold charge. But what hes saying about boiling sulfuric acid off the plates is incorrect. Eventually the plates will be too far gone to hold charge anymore. The lead is a consumable. Meaning it will wear out.
@jimpiaz953720 күн бұрын
When are you going to do a load test so the rest of us can watch ???
@jimpiaz953720 күн бұрын
Lol, how'd that work out for you.
@albert69Einstein20 күн бұрын
that's not how that works. if anything you are weakening the integrity of the plastic case.
@GaneshmanLamathinker20 күн бұрын
Are you sure 😅
@SpecialAgentJamesAki21 күн бұрын
I worked at a hybrid/electric car shop for some time and we would refresh old 12v starting batteries for people who couldn’t afford new ones. We had a whole setup for it with a ventilated “safety” box in case the batteries exploded. I put a dry cell battery on it one day just for fun and that sucker exploded like no one’s business. Probably would have sent it’s top through the roof if it wasn’t in the safety box 😂😂😂
Пікірлер
Guys
Lhave naver seenthis
200USD for some junk auto parts battery? Sure...
Wow people really have some strong opinions on this video!😮
Put your face closer to the battery
Heat is the natural enemy of a lead acid battery. It breaks down the binder that holds the plate material together. Most batteries fail because of accumulation of the lead particles at the bottom of the cells which creates a bridge and shorts out the negative and positive plates. This is a natural progress that is only accelerated by Rising temperatures in the battery. By overcharging a battery. You inherently run the risk of thermal runaway. this is a dangerous scenario and can turn a battery into a bomb.
We replaced the hose from the radiator to the reservoir with clear tubing in the 90s to see if we had rust in the system. Cast iron blocks rust. We did this to the reservoir hose because it's not under pressure. If your engine mount goes that short tubing won't have enough room to move, and might break lose.
Why is it 40/40? Where are the other 20%?
Never looked into that. Maybe it bleeds it back off so the breaking isn’t as aggressive.
Why ditch the h?
Tig welder to battery is a nice touch for your home insurance
Better idea, buy a real drop in replacement tank that’s 65 gallons lmao what is this nonsense.
Better ideas cost more money
How do you fill it up?
From the fuel door first then the top of the tank. There’s certainly better ways to accomplish this so you could fill from the top tank but you would have to run the stock breath to the top tank.
Ill just buy a new battery.
Anyone know if the f22 in the base 4th gen is a 5 or 6 rib interested says 5 but then I seen this
🤦♂️
Nice! How many layers of clear did you use? And did you buff it prior?
Two
Did you have issues with the air temp afterwards? I have
Nope. Did you buy a genuine oem?
Safe 100% do not question me 😂
$200.00??? Wow, it only cost me $800.00 to buy a new TIG WELDER. EXPLOSIVE INFO!!!
DC welders are cheap haha and if you understand how they work, you would know this will do no harm as it’s meant to be used this way.
Sorry that's not going to work, it's a joke to try to get people to do this. Just runs the battery which is already probably bad.
Boiling batteries witha tig welder. I've seen it all now. The internet is goated
im 79 and buy the emory cloths in a 1 inch wide roll. that is a neat idea though.
Your fuel filter is on the wrong side of the fuel cutoff… The cutoff should be before the filter so you can turn off the fuel to change the filter…😂
You’re wrong as Coleman placed the shut off where it is so it was accessible from the panel that covers that area 😂
This tubing will expand with heat and pressure, over time it will dry out from the heat and become brittle.
How many years will it take? It’s been on for a year now…
Does this work with smaller like mighty Maxx 12 v 12 ah lead acid batts. Should it turn the welder down to like 30amps?
It can work. I would do your research on this process as my video only shows a snippet of it. If you have ever seen those large auto shop jump boxes on a hand truck…these go up to 40 amps
Bro, no….. if it’s boiling like that, it’s too hot And it will explode or melt ! The process takes all day. Check your mixture s/b 70% diluted water and 30% acid. Set your welder to about 50 or 60 A, Hook it up and let it sit on there for about 15 minutes. Turn it off And let the battery sit for an hour. Let it cool down. Repeat the process 5 more times. It’s a good hack and saves you a lot of money, but it must be done safely. Don’t risk your health for convenience.
You watched a bunch of KZread videos. I can tell. They are just people repeating other people. They don’t know the og ways. Myself and many others in the comments have been doing this since our daddies showed us. I have never had one pop. Besides, big boy shot jumpers run 40 amps through batteries…
I use the harbor freight Viking battery charger tender it's saved six or eight batteries thus far
Meh Just get a drag up tank
This dude is ganna be a land lord someday 🤣
Hold on a minute i thought that this could cause it to explode??
Boiling battery acid produces hydrogen gas. It's very explosive.
😂how do you know if cells have collapsed or not,unless you cut it open,once you have done that you no longer have a battery but a bomb😂😂
A “dumbbutt “…🙈😆… that’s a new one!
Wtf......
I bet you voted for Joe Biden.
18 wheeler owner-operator here.. You can get some significant fuel savings by fueling up in the right places.
that was one of the worse knife hands I've ever seen
I promise you, one spark, and it will go BOOM 💥😂
Great idea if you can spare the space. I bet a set of mustang tank straps would work well in that application.
One spark and your done😮
You do mean 13.2 Volts right ?
Nope, I meant what I said. This process requires you to pulse the battery with amperage multiple times. Each time the voltage should be going up. If it doesn’t you know you have a bad cell.
Blah blah blah 'splode!
I don't think that's how you do that ? Just saying.
Cap
This may work. But hell only buy himself a few more months out of it if hes lucky. If the lead plates arent so far gone. And you can descale the plates enough to hold charge. But what hes saying about boiling sulfuric acid off the plates is incorrect. Eventually the plates will be too far gone to hold charge anymore. The lead is a consumable. Meaning it will wear out.
When are you going to do a load test so the rest of us can watch ???
Lol, how'd that work out for you.
that's not how that works. if anything you are weakening the integrity of the plastic case.
Are you sure 😅
I worked at a hybrid/electric car shop for some time and we would refresh old 12v starting batteries for people who couldn’t afford new ones. We had a whole setup for it with a ventilated “safety” box in case the batteries exploded. I put a dry cell battery on it one day just for fun and that sucker exploded like no one’s business. Probably would have sent it’s top through the roof if it wasn’t in the safety box 😂😂😂