Holy hell is this exactly what I needed, I have an '01 Prelude and was like, "Oh this video is Honda specific, that's perfect." Then bam, it's my model, thanks man!

@thestateofreal2533

3 жыл бұрын

No problem man! Glad I could help.

I wanted to make this video for awhile because there are a lot of videos showing “how to” do this without the use of a circuit breaker! USING A CIRCUIT BREAKER IS ABSOLUTELY NECESSARY!!! If you do not and you’re starter starts going bad...🔥

Great video man, very detailed too! I just picked up a 99 Prelude and can’t wait to start building it, I really like your setup!

@thestateofreal2533

4 жыл бұрын

Nick McCoy thanks buddy! There always something to tweak! More tweaks coming soon! Stay tuned!

Just found this channel and I really like your channel so far. I'm a honda acura guy so anything honda acura related I most definitely will watch!

@thestateofreal2533

4 жыл бұрын

JaH RaH thanks man! Well if it makes you feel even more excited...I have some Acura 4 pot brakes coming in the mail for this build!

@thestateofreal2533

4 жыл бұрын

JaH RaH nitrous coming soon 🤫

Nice video. Thanks for the content!

@thestateofreal2533

4 жыл бұрын

I_auto_enthusiast thanks buddy!

Very thorough and patient explanation. I missed this when you posted it, even though I am get notifications. KZread flubbed, I guess.

@thestateofreal2533

4 жыл бұрын

Camas thanks I tired as best I could!

I love the explanation being honda/acura specific, and it gave me the little extra info I needed...... but the job you did was pretty ghetto....

@thestateofreal2533

3 жыл бұрын

Glad to hear it! Hey brother this isn’t a show car this is a turbo street sleeper. If your setup is good, people want a ride...not inspect your battery relocation setup. Just got a bigger turbo and going for 700 horsies 🤟🏻

Great vid and May I ask necessary take precaution to prevent poison gas leakage from the battery that many other videos including this, thank buddy.

i had the car stripped, so i pass my wire whit the original wiring into the front fender to the door than pass whit the brake line on the passager side (3gen)..clean job (y)

@thestateofreal2533

4 жыл бұрын

phjil pha as much as that would be a pain that would definitely be really clean!

do i need to vent a gel battery at all if its not in a battery box?

@thestateofreal2533

Жыл бұрын

No you don’t need to vent gel batteries

Please tell me you did something about that positive wire connection just hanging around exposed in your engine bay. You’re gonna short that thing against the chassis of the car. Also, you should box and vent that battery.

@thestateofreal2533

3 жыл бұрын

Oh of course. It was electrically taped up before I made the video but I untaped it for the video. Yea I mention that in the video (whiteboard) for those who don’t already have a vented trunk like myself. Non-lead batteries don’t off gas toxic fumes.

What if you don't put a fuse ... and what would case the wires to burn?? Only asking because most kits don't include the fuse ...

@thestateofreal2533

3 жыл бұрын

The fuse is a precautionary thing. Over amp draw can happen and burn a wire in the harness somewhere. The fuse prevents that.

What about the power wire that goes from the fuse box to the battery?

@thestateofreal2533

4 жыл бұрын

sergio quezada that is the same one connecting the starter. All of the power to the vehicle comes from the wire going to the positive terminal to the battery. If you connect your new relocation wire directly to the wires coming from the positive terminal connector then you will have power to everything else. In a car that’s usually the same wire going to your starter since you’re starter is always “HOT”

I have to ask brother, what shifter are you running? Love the content!!!! NASA approved 🚀🚀🚀🚀🚀💯💯💯💯

@thestateofreal2533

4 жыл бұрын

Michael Barrientos it’s the RSX k-tuned shifter replica. Haha thanks buddy!

@1998TYPES

4 жыл бұрын

THE STATE OF REAL on stock prelude shift box or you running a k series shifter box? I’m very interested in the k series race spec setup. If you have a video of install of your shifter my apologies.😅🙏💪🏻🚀💯

Hey I have a question so because I bought a h22a from a guy with 9.0:1 compression pistons, arp head studs and a cometic head gasket. Took my h22a4 out and put in the new engine with a turbo and when I started it I hear a little rod knock. I take the crank out to see that the king's racing bearings are at standard size and they fell right out. I take it to a machine shop and I was told that the person that did the work machined the crank ten thousands too small and that he took out a hardened metal from the crank and that it won't last if we put the right size bearings in. Is this true, and what are my options?

@thestateofreal2533

4 жыл бұрын

anthony escalante Most Honda cranks are forged and case hardened. So if the crank is turned down .010 and not hardened then it will be more susceptible to wear...especially with a power adder. Crank journals can be hardened. That being said, for $120-$150 you can buy a used h22a4 crank that hasn’t been turned down and that will solve your dilemma.

@EscoBoosted

4 жыл бұрын

@@thestateofreal2533 so I have the closed deck h22a. Will a open deck h22a4 crank fit the same?

@thestateofreal2533

4 жыл бұрын

anthony escalante Great question! You want to look for an h22a4 crank from a 1997 Honda prelude...the h22a and the h22a4 from 1997 Honda prelude have 50mm main journals.

@thestateofreal2533

4 жыл бұрын

anthony escalante here is a great resource: www.kstuned.com/blogs/knowledge/all-h-f-series-engines-have-the-same-deck-height

@EscoBoosted

4 жыл бұрын

@@thestateofreal2533 cool thanks that helped a lot👍 and keep doing what you're doing I learn a lot from your page!