Thanks, TOM, Simple and straight-to-the-point instructions! you have teaching skills demonstrated with VERY relaxing background music. THANKS

@thestateofreal2533

11 ай бұрын

Thank you for the encouragement

top stuff bro...hope to see you in bath, PA for prelude day

@thestateofreal2533

2 жыл бұрын

As long as Uncle Sam doesn’t have other thing planned for me then lol will be there. I have been all over the place this year 😴

Do you need to apply gasket maker when putting on a new water pump? Because there is already a gasket in there

@thestateofreal2533

2 жыл бұрын

You don’t have to but I do just because I don’t want to have to go back in and fix it if the gasket doesn’t seat properly haha

Hey man, clean Prelude! What radiator fan are you running? I'm in need of a single fan setup like that

@thestateofreal2533

2 жыл бұрын

Oem civic fan. I had one of those high output direct mount ones but it caused overheating as there were hot spots on the corners where the fan did not draw air through

That’s crazy that the timing belt runs the water pump.

@joeidaho5938

2 жыл бұрын

The 90s Ford trucks are so much simpler, eh? lol

@TheMinuteMasters

2 жыл бұрын

@@joeidaho5938 Oh yeah! That’s my brother btw.🤙

@joeidaho5938

2 жыл бұрын

@@TheMinuteMasters I ended up here from one of your own vids you did on your brother's Ford truck. Looking forward to the work on the t-bird.

@thestateofreal2533

2 жыл бұрын

Joe Idaho I am in the mids of building a 24x24 garage so that I can get the t-bird up to the new house and work on it 🥰

@thestateofreal2533

2 жыл бұрын

Steve, yes this is very common for 4 cylinders engines as most of them only have a timing belt or timing chain. In the aftermarket they do sell electric ones to reduce parasitic losses. Usually 4 cylinder performance builds in the 1000hp+ use an electric water pump and then they instal a timing belt driven fuel pump in its place. This gives you more consistent linear fuel pressures as demands get higher. To make 1000+hp you are running 4 2200cc injectors and -10AN fuel lines lol my prelude could do it but unless you run 24” wide slicks it’s not practical.

Any way I can get the run down of what you did to get the G23 Frankenstein? Parts list and what " you " did?

great video, what kind of clear hose is that on the top radiator hose?

@thestateofreal2533

Жыл бұрын

1-1/4 Home Depot/Lowes special haha been holding up better than expected!

That big tank tho 😂

When you’re loosening the timing belt, what exactly are you loosening and tightening?

@thestateofreal2533

Жыл бұрын

There’s is a tensioner. Stock ones are automatic tensioners which have a bad history of failing so most of use move to manual tensioners which consists of a bolt coming off a block of aluminum with a lock nut to keep everything in position once at the right tension

I have same manifold exhaust on my f20b . With extra 44mm wastgate

@thestateofreal2533

2 жыл бұрын

Sick! Lovefab?

@MultiChickena

2 жыл бұрын

@@thestateofreal2533 yes Lovefab

Did your rywire distributor end up working anything extra you had to do??

@thestateofreal2533

Жыл бұрын

Works great! Had it on for 2 years.

So you have a jack supporting your engine block when you’re taking off your mount?

@thestateofreal2533

Жыл бұрын

There are four motor mounts and if yours are in good continuation the block won’t move much. When your are putting the mount back in you might need to jack it.

Hey I was wondering if you can use h22a spark plugs on a f20B?

@thestateofreal2533

2 жыл бұрын

Yup you can! I am using them now.

@thestateofreal2533

2 жыл бұрын

Almost all parts from an h are compatible with the f20b except pistons rods, h22a4 for 1997 cranks (50mm journals) oil pick up and pan. The f20b manual heads are almost identical as well with the only differences being 1mm smaller intake valves and h22 type s cam profile.

Anyone e can help me with harness diagrams for my prelude1997 Type SH. Stereo has 2 connectors at back. Interested in wiring for the 10 pin harness. Also car came with a navigation system

@thestateofreal2533

2 жыл бұрын

To be honest I have never messed around with my stereo. Sorry!

What kit would I need for a H23A

@thestateofreal2533

2 жыл бұрын

Don’t buy a kit as 98% of the time they are garbage. Spend your money on a good thick manifold of whatever orientation you want then piece together the rest. I pieced together mine and this setup has years of use (abuse) in it.

@danielhodge95

2 жыл бұрын

I understand but I'm doing timing belt as well so I'm wondering what I need to make it happen on that engine. Don't need a manifold

Where you buy your parts bro?

@thestateofreal2533

7 ай бұрын

eBay, rockauto, Napa. I believe this water pump was from eBay as it showed pictures of the impeller.

Where do u jack the engine😊

@dolceamore4065

11 ай бұрын

On ur oil pan, jus place a 2x4 or 2x6 wood on top of jack will do it.

Would I be able to put a h22 head on a f20b block?

@thestateofreal2533

Жыл бұрын

Yup the f20b and h22 are pretty much the same casting. H22 heads just have roughly 1mm bigger intake valves.

@rhysgilovitch8946

Жыл бұрын

@@thestateofreal2533 would the bigger valves cause issues if I run with stock f20b pistons and rods

@thestateofreal2533

Жыл бұрын

Nope

What state u in.

@thestateofreal2533

2 жыл бұрын

PA

@newyorkers30

2 жыл бұрын

I'm in ga. Whats a good link to order timing belt n water pump. Are gates good ?

You need a Hobby !

@thestateofreal2533

2 жыл бұрын

This one pays 🤑