Step by step - How to install AN fuel lines to make more horsepower!
Тәжірибелік нұсқаулар және стиль
#Biggerfuelsystem #boost #E85
How to installing AN lines so that you can make more horsepower with a turbo supercharger or nitrous system.
I did this on my h22 / F20b but it can be replicated in most other Honda’s k20, k24, b18, b20…ect
Installing fuel injector isn’t always the answer because at a certain point your stock fuel likes are just too small to flow more fuel.
My first suggestion would be to get rid of all possible flow restrictions from banjo bolt fittings and stock fuel filter and install a high flow fuel filter.
Next install a high flow fuel pump like walbro 255lph or 450lph, deatschwerks 340 fuel pump (all in tank setups)
Or install a high flow inline fuel pump like AEM 400lph.
Install a fuel pump relay so you have the entire range of max fuel flow achieve at 14 volts
Install a high flow fuel filter and fuel pressure regulator
If that doesn’t cut it then you need to install -6AN, -8AN, or even -10AN fuel lines!
Install a bigger fuel rail
THEN you can install those bigger injectors!
As this video does not cover all motor displacements, strokes, cams and a lot of other variables, it should give you an idea about what to look for and what to change. Any questions please drop a comment for the good of the group.
Links to parts:
CPE line - www.amazon.com/dp/B072TTGTS9/...
(E85) PTFE line kit - EVIL ENERGY Kit www.amazon.com/dp/B07JF93GG6/...
5/16 compression fittings - www.amazon.com/dp/B07BSC88YK/...
100 micron fuel filter - EVIL ENERGY Inline 100 Micron Fuel filter - www.amazon.com/dp/B07CCM8QCF/...
EVIL ENERGY Inline 100 Micron Fuel Filter 6AN 8AN 10AN Adapter Universal 50MM www.amazon.com/dp/B07CCM8QCF/...
Cushion clamps - www.amazon.com/dp/B000CPAS8C/...
eBay universal fuel pressure regulator up to 100 psi kit - www.ebay.com/itm/Gauge-Univer...
Music: Lakey inspired - Overjoyed
Пікірлер: 22
I thought about supercharging the 416 stroker! These videos are always top quality content!!
@thestateofreal2533
6 ай бұрын
Doooo it!!! Thanks brother! Almost got my 390FE back together. Just got to degree the cam and get a measurement for the custom push rod length and she done.
The music intro is killing me. :D Love the care you and your brother put into making the videos on your channels. Thanks for taking the time to make them well. ". . . In a really annoying spot." Gee, does Honda know any other way? :D
@thestateofreal2533
4 жыл бұрын
Haha alternative jazz and house music is what most of the young car people put to their b roll scenes today and I have come to like it. I know it’s not for everyone! Haha this is why I buy older Honda’s...the new ones are way worse!
Great video bro i will def be watching this again when i upgrade mine.
@thestateofreal2533
4 жыл бұрын
Trey Be Dipping I made it for you!
@treybedipping1734
4 жыл бұрын
@@thestateofreal2533 ✊🏾✊🏾✊🏾 is that mr beast👇🏽👇🏽👇🏽👇🏽 🤣 he has like 60million subs
@thestateofreal2533
4 жыл бұрын
Trey Be Dipping he probably got lost on KZread 😂
Wait? A whiteboard? Stevie doesn't even give us whiteboard. The video arms race is ON! And wearing the black gloves when doing the chalk-talk gives the not unhumorous effect of having Batman present the instruction. :D
@thestateofreal2533
4 жыл бұрын
Haha Steve is usually pretty good at rehearsing what he’s gonna do ahead of time where as most of my videos are one take and I never shut up lol Haha #batmanlives 💪🏻
Gosh. Your engine is cleaner than my car's interior.
@thestateofreal2533
4 жыл бұрын
I try to keep it that way because at the moment I don’t have room to run an air cleaner on the turbocharger...just have a homemade one of screen and filter fabric 😅 The turbo charger I have is a Borge Warner EFR 7163 and they are not cheap...trying to keep it form sucking in dirt.
Did you get the car tuned already? Good job on the fuel lines. I just order the same intercooler for my EG.
@thestateofreal2533
4 жыл бұрын
Richard Tuning thanks! Yup car is tuned at 15psi. I was having an issue e-tuning over 18psi...kept hitting boost cut and found that I developed a boost leak at the TB shaft opening...swapped out with another I had. My tuner wanted to switch to a 3 port boost control solenoid as well so I did. Hoping to do some data logging, get some e-tunes, and then hit the dyno if all is good after.
@thestateofreal2533
4 жыл бұрын
Richard Tuning yea the TR11 is a great intercooler...hoping that I don’t have to go bigger 😂
Is there a point of doing stuff to your fuel lines if your motor is gonna stay stock, like will it actually add any power
@thestateofreal2533
4 жыл бұрын
Neffmonkey great questions! No this is more for builds that demand more fuel than your stock fuel system can flow.
@neffmonkey635
4 жыл бұрын
THE STATE OF REAL all good thanks. I got a stock h22 but just wondering for you, how much boost is in yours
@thestateofreal2533
4 жыл бұрын
Neffmonkey right now I’m on a 15 psi at 10:1cr. It’s hard to use much more than that haha I’m right around 450hp. Hoping to max out the setup soon as my turbo is the limiting factor. I should be able to make just at or under 600hp.
@neffmonkey635
4 жыл бұрын
THE STATE OF REAL nice dude, yeah I heard shoving that much boost or more and engine go bye bye
Beer? Is it a "brain-nam"? LOL
@thestateofreal2533
4 жыл бұрын
😆