Sha'nequa and Buffalo Butt shopping for locks but decided to steal instead? Lordy lordy lordy....what has this world come to??!!!! 🤦♂️
@ken_93594 сағат бұрын
I thought about the 3 Tumblers podcast when I read you video description.
@Mr.WS611 сағат бұрын
How do I get that drop in thing in baggy #2?
@dickgozinya922818 сағат бұрын
Mine broke. I took it apart. If I could buy the broken cast POS part I could easily fix it. But NOOOOOOO...they want you to buy the whole thing again and wait for it to break. Wash, rinse, repeat.
@mattoliverauКүн бұрын
Nice, always love a good antique lock key video! Great work as always Jason!
@kevinkoepke8311Күн бұрын
First KZread video after the internet came back up. Now if only the electric would come on. Thanks, Jason
@selock19 сағат бұрын
you aight
@kevinkoepke83119 сағат бұрын
The hum of generators makes it easy to sleep. No power yet, Wednesday 01:00, but internet just came on (intermittent), that's why this early morning reply. I did check mail, and received your gift of bling 😊 That made my day. Thanks, Jason and Kim.
@starkusmc1981Күн бұрын
I'm trash at impressioning, but still practice.
@digitalblue113Күн бұрын
Excellent package. I received mine today. Thanks to you and Kim for all the work to get these out.
@ImGumbyDangitКүн бұрын
Excellent work Jason. I wonder how hard it would be to rig a Slotter to go straight in like a FRA2.
@63flightКүн бұрын
Nice work! These are my favorite videos of yours.
@Dayman0warКүн бұрын
Love that you do these videos because I'm a new locksmith and this is helping me make a list of what I need if I don't have it already, thanks
@geraldskinner63Күн бұрын
Actual Locksmith
@waywardmedia4491Күн бұрын
How much would you charge the customer for making a key to a lock like that? I run a key cutters in the UK so quite curious.
@selockКүн бұрын
@@waywardmedia4491 usually $55-$75 USD in shop typically and in the field can be $125-$175 plus a service charge for their location
@georgeblair7129Күн бұрын
Lotsa fun making keys by hand sometimes.
@gregoryd2357Күн бұрын
How do you remove the swivel spindle? I have been trying all day
@glennbechtel6424Күн бұрын
good work
@thecompguyКүн бұрын
Ahh the vent! Those things are as hungry as my gravel garage floor!!
@gkeyman565Күн бұрын
Great job, just like all the other one's. have a great day
@8MWm3e4bКүн бұрын
How do you start the cuts, where do you see how deep they are?
@lynh8378Күн бұрын
Love these videos! Thanks!
@stephenzies8867Күн бұрын
Expert Job. Nice - Awesome - Perfect 🗝 Thanks !
@Nicks-Picks2 күн бұрын
I could watch you make lever keys all day Jason 😊how long did it take you may I ask just out of curiosity 🤜🤛
@selock2 күн бұрын
@@Nicks-Picks take out the extra 10-15 minutes of talking, repositioning camera, showing how to do it via straight impressioning, etc it’s usually a 15 or so minute make
@Nicks-PicksКүн бұрын
@@selock nice, I have a few lever cabinet and draw locks without keys......feeling inspired 😁I'll be having a go when I get some blanks. Thanks for sharing Jason and have a great week mate 🙏🤜🤛👍
@mcdpoor2 күн бұрын
Very educational
@PocketWomen2 күн бұрын
There is something really relaxing about watching a key being impressioned. Thanks for this video, cheers
@Angelazul19972 күн бұрын
I'm all for supporting small businesses, but this must be in a small town. Because everyone just goes to Home Depot or Lowe's for stuff like this.
@selock2 күн бұрын
Locksmith companies sell many things you cannot go buy or have done properly at HD/Lowes
@Iam_lamb2 күн бұрын
Lookin’ for a lock so they can squat in someone else’s house
@chriscapune78732 күн бұрын
😅👏🐾🐈⬛
@DSCircleJockey2 күн бұрын
It's a well known fact that a screw dropped from two feet above the ground can travel sideways and even uphill three to four times that far across the floor to the nearest dark place or hole. It can often have enough energy left to then make a ninety degree turn and stop behind a larger object. I call those cockroach screws.
@peterguindo15762 күн бұрын
Nice video, I am working as a lock assembler for a well known company Securitech/Assaabloy located in NYC in is very similar what I do, thanks for sharing.
@Mr1nferno3 күн бұрын
That's why I save every screw I find
@RuneInternational3 күн бұрын
Always cover vents or bring spare screws
@kevinkoepke83113 күн бұрын
Don't drop it!
@mcdpoor3 күн бұрын
Missed the live and watched the video.
@ImGumbyDangit3 күн бұрын
Happy SML #LockForce Just checked USPS mine is due 8 July. I hope you had a nice Traitors day. 🇨🇦 . There is some sticker room on the side of the 018. Love my LAB Annex. I have screwed myself on a few locks by adding security pins. You need some Duct Tape for that plastic bin. I was going to tag @HoppSkipity - glad he showed up. MiniCD and 3.5" floppy is much smaller than the Goof Plate. I may have a zip up CD case that would work for that. I did pop in during live for about 2 mins - working again next Saturday as well. You can mix a bit of Vodka in your MS Cold Drip bottle to help rinse it out. Have a Great Week Y'all. We need to make Mondays part of the weekend all the time so we can start complaining about Tuesdays.
@lowellforbes32083 күн бұрын
Attending Saturday morning replay Haven’t seen anything in my mail yet
@mikefinley47133 күн бұрын
I know work always gets in the way of the live. But great after show as always.
@jmr3 күн бұрын
I was in an MRI machine for most of the dang stream! 😢
@ImGumbyDangit3 күн бұрын
Hope all went well
@jmr3 күн бұрын
@@ImGumbyDangit It was just a check up I have to do once or twice a year.
@daoustlocksmith68283 күн бұрын
Darn. Had to work. Missed live LockForce team. 😢
@ken_93594 күн бұрын
A little graphite goes a long way. That's way too much.
@user-vb8dj6lr7t4 күн бұрын
Does this case of lock has a máster key to release the old code and set a New code?
@selock4 күн бұрын
@@user-vb8dj6lr7t no
@citybright89254 күн бұрын
Thank you! You are a lifesaver. I was having trouble installing a new Schlage double-keyed deadbolt - old model but never used - and the Schlage instructions said to "throw" the deadbolt but didn't say HOW. Your excellent instructions saved the day, 😎🙏👍
Пікірлер
Sha'nequa and Buffalo Butt shopping for locks but decided to steal instead? Lordy lordy lordy....what has this world come to??!!!! 🤦♂️
I thought about the 3 Tumblers podcast when I read you video description.
How do I get that drop in thing in baggy #2?
Mine broke. I took it apart. If I could buy the broken cast POS part I could easily fix it. But NOOOOOOO...they want you to buy the whole thing again and wait for it to break. Wash, rinse, repeat.
Nice, always love a good antique lock key video! Great work as always Jason!
First KZread video after the internet came back up. Now if only the electric would come on. Thanks, Jason
you aight
The hum of generators makes it easy to sleep. No power yet, Wednesday 01:00, but internet just came on (intermittent), that's why this early morning reply. I did check mail, and received your gift of bling 😊 That made my day. Thanks, Jason and Kim.
I'm trash at impressioning, but still practice.
Excellent package. I received mine today. Thanks to you and Kim for all the work to get these out.
Excellent work Jason. I wonder how hard it would be to rig a Slotter to go straight in like a FRA2.
Nice work! These are my favorite videos of yours.
Love that you do these videos because I'm a new locksmith and this is helping me make a list of what I need if I don't have it already, thanks
Actual Locksmith
How much would you charge the customer for making a key to a lock like that? I run a key cutters in the UK so quite curious.
@@waywardmedia4491 usually $55-$75 USD in shop typically and in the field can be $125-$175 plus a service charge for their location
Lotsa fun making keys by hand sometimes.
How do you remove the swivel spindle? I have been trying all day
good work
Ahh the vent! Those things are as hungry as my gravel garage floor!!
Great job, just like all the other one's. have a great day
How do you start the cuts, where do you see how deep they are?
Love these videos! Thanks!
Expert Job. Nice - Awesome - Perfect 🗝 Thanks !
I could watch you make lever keys all day Jason 😊how long did it take you may I ask just out of curiosity 🤜🤛
@@Nicks-Picks take out the extra 10-15 minutes of talking, repositioning camera, showing how to do it via straight impressioning, etc it’s usually a 15 or so minute make
@@selock nice, I have a few lever cabinet and draw locks without keys......feeling inspired 😁I'll be having a go when I get some blanks. Thanks for sharing Jason and have a great week mate 🙏🤜🤛👍
Very educational
There is something really relaxing about watching a key being impressioned. Thanks for this video, cheers
I'm all for supporting small businesses, but this must be in a small town. Because everyone just goes to Home Depot or Lowe's for stuff like this.
Locksmith companies sell many things you cannot go buy or have done properly at HD/Lowes
Lookin’ for a lock so they can squat in someone else’s house
😅👏🐾🐈⬛
It's a well known fact that a screw dropped from two feet above the ground can travel sideways and even uphill three to four times that far across the floor to the nearest dark place or hole. It can often have enough energy left to then make a ninety degree turn and stop behind a larger object. I call those cockroach screws.
Nice video, I am working as a lock assembler for a well known company Securitech/Assaabloy located in NYC in is very similar what I do, thanks for sharing.
That's why I save every screw I find
Always cover vents or bring spare screws
Don't drop it!
Missed the live and watched the video.
Happy SML #LockForce Just checked USPS mine is due 8 July. I hope you had a nice Traitors day. 🇨🇦 . There is some sticker room on the side of the 018. Love my LAB Annex. I have screwed myself on a few locks by adding security pins. You need some Duct Tape for that plastic bin. I was going to tag @HoppSkipity - glad he showed up. MiniCD and 3.5" floppy is much smaller than the Goof Plate. I may have a zip up CD case that would work for that. I did pop in during live for about 2 mins - working again next Saturday as well. You can mix a bit of Vodka in your MS Cold Drip bottle to help rinse it out. Have a Great Week Y'all. We need to make Mondays part of the weekend all the time so we can start complaining about Tuesdays.
Attending Saturday morning replay Haven’t seen anything in my mail yet
I know work always gets in the way of the live. But great after show as always.
I was in an MRI machine for most of the dang stream! 😢
Hope all went well
@@ImGumbyDangit It was just a check up I have to do once or twice a year.
Darn. Had to work. Missed live LockForce team. 😢
A little graphite goes a long way. That's way too much.
Does this case of lock has a máster key to release the old code and set a New code?
@@user-vb8dj6lr7t no
Thank you! You are a lifesaver. I was having trouble installing a new Schlage double-keyed deadbolt - old model but never used - and the Schlage instructions said to "throw" the deadbolt but didn't say HOW. Your excellent instructions saved the day, 😎🙏👍