C'est un test qui date dex4 ans ,depuis ELRS 2,4 est passé par là et rend obsolète les critiques
@notice_fpv12 күн бұрын
I wouldn't want to crash it though!
@CarbonGlassMan12 күн бұрын
I wanted to build a 3.5 freestyle quad so the 1st thing I did was find a cheap frame on Amazon. I had no idea it was this exact frame. So I bought a clone frame I guess. I have a Skystars F405 40a AIO, Vista but with the original metal DJI camera so I have the low latency mode (I'll probably swap it out with a Nebula nano Pro camera), elrs 915mhz receiver and right now I have to decide on motors. I have some 1404 3500kv motors that came on a Crux35 that I only bought to steal the Vista out of, some 1408 Xing 4100kv, & I have on order some Xnova 1804 3100kv. I'll try it out with the 1408, but I'll try the 1804 when they get here.
@coltengibbs540418 күн бұрын
Do you find any benefit of the two blade prop instead of the three blade?
@MrShutterBug16 күн бұрын
@@coltengibbs5404 I think 2 blade gives better battery life, but I prefer 3 blade for racing because I think it gives better control in the tight corners. Just my preference.
@Braincho26 күн бұрын
How to know when to land? Your batterie dropped like 100 times to very low numbers. How to know exactly when is the real end?
@MrShutterBug24 күн бұрын
I guess the real end is when the voltage doesn’t bounce back any more. I can get a feeling for when that will be. I usually also have a timer on my radio, as a fallback.
@Braincho23 күн бұрын
@@MrShutterBug i see... so you know in advance how much time approximately you can fly... but how to get the time with new drone and batteries... Thanks!
@magiliangaming27 күн бұрын
great tip nice and easy to do. very well explained i found you can just loop the floss before you put it through to save you having to do a second, more fiddly pass-through!
@canadiangemstones763629 күн бұрын
4 years later... sub 1 gram yet?
@Gittykitty29 күн бұрын
I need to replace a tyco rc battery connector, do the same rules apply?
@cdramafpvАй бұрын
wow.. 2024.. I need to do this to the nanohawk!
@ronniequalls7217Ай бұрын
I just found this drone on EBay, brand new , I had to grab it ! lol 😂
@JpandesАй бұрын
That’s awesome!
@RIGHTEOUS_RAGEАй бұрын
this is exactly what is wrong with my 5".... but i get 5 beeps, just no motor beeps, bout to repair with 5v BEC diatone mamba 6s external....
@ondrejpesek4439Ай бұрын
How much did it cost?
@Funcentric2 ай бұрын
Nice ending!
@junkthe2 ай бұрын
Cool i m looking for <$30 hdzero vrx goggles , to run this 1S capable.
@antoniofrance82 ай бұрын
Jai fait cela mais je crois que j’ai mi trop d’étain du coup avec la thermo sa se voie un peu Cela est il risque ?
@michaelt45132 ай бұрын
Thank you so much for this great idea! I basically made an exact copy, but added a crossfire receiver and changed the battery lead to BT2.0 (to use some existing batteries) and ended up at 23g even. I used the HQ props 40mmX2GR. With a 550mAh (betafpv lava, stop at 3.5V) I get a little over 4min of fun ripping 😊 it flys fantastic with no additional changes (except rates).
@gabormihaly6673 ай бұрын
I can never tune the radio properly. That's why my drone doesn't fly anymore.
@ourchannel82153 ай бұрын
8000kv using 3s...motor got hot? my motor 4300kv using 3S 3inch got hot...not very blady hot ...its safe or not?? sorry bad english...im from malaysia
@holisticaustralia3 ай бұрын
I really enjoy your content, thanks for the rock n roll instead of the usual noise fpv pilots 😅 tend to choose
@alperenozgur3 ай бұрын
650 6s flight time? lol
@cookedfpv3 ай бұрын
any thoughts after all this time on retrofitting with hdzero whoop lite or freestyle?
@maxl60583 ай бұрын
Man, I wonder how many whoops you have lost somewhere up in this trees
@MrShutterBug3 ай бұрын
Haha. Never lost a whoop. I did loose a “Babytooth” drone at a park once though.
@gaidkey11283 ай бұрын
@MrShutterBug i hope you are doing well.we havent seen any videos from you lately and i had to make sure i was still subscribed.looking forward to your comeback whoop videos lol
@MrShutterBug3 ай бұрын
Hi. Thanks for the kind words. I’m doing great just haven’t had time for videos lately.
@uhu46773 ай бұрын
@@MrShutterBug Thx a lot for showing up here in the comments. Just good to see, you're still around. 🙂
@kenstogie3 ай бұрын
I did that! Once…ruined the battery…luckily that was all.
@uhu46773 ай бұрын
Holy moly, that's lighter than a Vista with Cam. If DJI does not come up with a lighter solution I have to get into HDZero sooner or later.
@harshlalwani43114 ай бұрын
Where can I buy renu screws?
@MrShutterBug4 ай бұрын
I got mine from solidspot.com
@dinosabic53834 ай бұрын
Holy smokes. I never realized the size of the gates until the part where you guys fixed the broken PVC. They are way larger than I envisioned they'd be.
@junkthe4 ай бұрын
Can i have betaflight firmware on litesilverware ex cetus Pro v1
@sakfpv84444 ай бұрын
Its been a year since your last video. Whats going on? Your the whoop guy. 😢
@MrShutterBug4 ай бұрын
Yeah, sorry about that. Life is just very full these days. I still love whoops though. :-)
@eduardomoracuellar73124 ай бұрын
I am looking for upgrading my gear, for now I only fly 1s tinys so for me winning the flywoo hex would be awsome! for second choice I pick the cinewhoop and last choice the betafpv pack, for my father to make him start on this :)
@gbj65815 ай бұрын
Hi, as someone who would want to get into this type of flying, would HDzero system be the best way to enter the space, or is Walksnail a good option. Thanks.
@dinosabic53835 ай бұрын
Been watching a bunch of your videos lately and they have me inspired to start building some ultra lights...... 4 frames on their way😅. They look like such a blast to fly! I have only ever built and flown >750g 5" quads or larger.
@hughyyyy5 ай бұрын
19:42 if you use enameled wire for these purposes - you can run a sharpie down the length of it to give it a hint of colour and aid with identification later on :D
@canaweb5 ай бұрын
I kniw its been a few years...but was was the total cost?
@GR8SCOTT5 ай бұрын
Love it!!!
@johnwalter64105 ай бұрын
Thats digi? Why does it look like analog?
@christopherconkright13175 ай бұрын
They make 2 blades now
@thepdails5 ай бұрын
Awesome video! One tip With the lighter: if you put it above or to the side of your workpiece, you can use the blue portion of the flame for a more controlled heat application. I learned this one when cleaning up cut edges of synthetic (plastic) textiles & ropes.
@wallaguest15 ай бұрын
amazing, a digital video tx in such a micro quad was like a impossible dream few years ago
@andrewcooke80145 ай бұрын
Wow! Incredible flying 😍
@KButler886 ай бұрын
Whenever I see a tiny whoops flying low all I can think of is star wars pod racing.
@bitsky6666 ай бұрын
this is really awesome
@RubiconDONN6 ай бұрын
Nicely done on covering things and sharing some tips I did not know. Thank you!
@HarshitVerma-vs5fz6 ай бұрын
At first I was waiting him to crash but I realise that he is a pro pilot l o l😂😂
@tabadrone6 ай бұрын
Dont stop. We like your videos. LIKE bottom pressed. I SUBSCRIBED here from Brazil.
Пікірлер
C'est un test qui date dex4 ans ,depuis ELRS 2,4 est passé par là et rend obsolète les critiques
I wouldn't want to crash it though!
I wanted to build a 3.5 freestyle quad so the 1st thing I did was find a cheap frame on Amazon. I had no idea it was this exact frame. So I bought a clone frame I guess. I have a Skystars F405 40a AIO, Vista but with the original metal DJI camera so I have the low latency mode (I'll probably swap it out with a Nebula nano Pro camera), elrs 915mhz receiver and right now I have to decide on motors. I have some 1404 3500kv motors that came on a Crux35 that I only bought to steal the Vista out of, some 1408 Xing 4100kv, & I have on order some Xnova 1804 3100kv. I'll try it out with the 1408, but I'll try the 1804 when they get here.
Do you find any benefit of the two blade prop instead of the three blade?
@@coltengibbs5404 I think 2 blade gives better battery life, but I prefer 3 blade for racing because I think it gives better control in the tight corners. Just my preference.
How to know when to land? Your batterie dropped like 100 times to very low numbers. How to know exactly when is the real end?
I guess the real end is when the voltage doesn’t bounce back any more. I can get a feeling for when that will be. I usually also have a timer on my radio, as a fallback.
@@MrShutterBug i see... so you know in advance how much time approximately you can fly... but how to get the time with new drone and batteries... Thanks!
great tip nice and easy to do. very well explained i found you can just loop the floss before you put it through to save you having to do a second, more fiddly pass-through!
4 years later... sub 1 gram yet?
I need to replace a tyco rc battery connector, do the same rules apply?
wow.. 2024.. I need to do this to the nanohawk!
I just found this drone on EBay, brand new , I had to grab it ! lol 😂
That’s awesome!
this is exactly what is wrong with my 5".... but i get 5 beeps, just no motor beeps, bout to repair with 5v BEC diatone mamba 6s external....
How much did it cost?
Nice ending!
Cool i m looking for <$30 hdzero vrx goggles , to run this 1S capable.
Jai fait cela mais je crois que j’ai mi trop d’étain du coup avec la thermo sa se voie un peu Cela est il risque ?
Thank you so much for this great idea! I basically made an exact copy, but added a crossfire receiver and changed the battery lead to BT2.0 (to use some existing batteries) and ended up at 23g even. I used the HQ props 40mmX2GR. With a 550mAh (betafpv lava, stop at 3.5V) I get a little over 4min of fun ripping 😊 it flys fantastic with no additional changes (except rates).
I can never tune the radio properly. That's why my drone doesn't fly anymore.
8000kv using 3s...motor got hot? my motor 4300kv using 3S 3inch got hot...not very blady hot ...its safe or not?? sorry bad english...im from malaysia
I really enjoy your content, thanks for the rock n roll instead of the usual noise fpv pilots 😅 tend to choose
650 6s flight time? lol
any thoughts after all this time on retrofitting with hdzero whoop lite or freestyle?
Man, I wonder how many whoops you have lost somewhere up in this trees
Haha. Never lost a whoop. I did loose a “Babytooth” drone at a park once though.
@MrShutterBug i hope you are doing well.we havent seen any videos from you lately and i had to make sure i was still subscribed.looking forward to your comeback whoop videos lol
Hi. Thanks for the kind words. I’m doing great just haven’t had time for videos lately.
@@MrShutterBug Thx a lot for showing up here in the comments. Just good to see, you're still around. 🙂
I did that! Once…ruined the battery…luckily that was all.
Holy moly, that's lighter than a Vista with Cam. If DJI does not come up with a lighter solution I have to get into HDZero sooner or later.
Where can I buy renu screws?
I got mine from solidspot.com
Holy smokes. I never realized the size of the gates until the part where you guys fixed the broken PVC. They are way larger than I envisioned they'd be.
Can i have betaflight firmware on litesilverware ex cetus Pro v1
Its been a year since your last video. Whats going on? Your the whoop guy. 😢
Yeah, sorry about that. Life is just very full these days. I still love whoops though. :-)
I am looking for upgrading my gear, for now I only fly 1s tinys so for me winning the flywoo hex would be awsome! for second choice I pick the cinewhoop and last choice the betafpv pack, for my father to make him start on this :)
Hi, as someone who would want to get into this type of flying, would HDzero system be the best way to enter the space, or is Walksnail a good option. Thanks.
Been watching a bunch of your videos lately and they have me inspired to start building some ultra lights...... 4 frames on their way😅. They look like such a blast to fly! I have only ever built and flown >750g 5" quads or larger.
19:42 if you use enameled wire for these purposes - you can run a sharpie down the length of it to give it a hint of colour and aid with identification later on :D
I kniw its been a few years...but was was the total cost?
Love it!!!
Thats digi? Why does it look like analog?
They make 2 blades now
Awesome video! One tip With the lighter: if you put it above or to the side of your workpiece, you can use the blue portion of the flame for a more controlled heat application. I learned this one when cleaning up cut edges of synthetic (plastic) textiles & ropes.
amazing, a digital video tx in such a micro quad was like a impossible dream few years ago
Wow! Incredible flying 😍
Whenever I see a tiny whoops flying low all I can think of is star wars pod racing.
this is really awesome
Nicely done on covering things and sharing some tips I did not know. Thank you!
At first I was waiting him to crash but I realise that he is a pro pilot l o l😂😂
Dont stop. We like your videos. LIKE bottom pressed. I SUBSCRIBED here from Brazil.
i though i was the only brazilian fan !
Video was gorgeous