After watching it again, I made an interesting observation. When the video cut out, the OSD was still updating! Maybe the VTX can continue broadcasting at low voltages? Maybe it's just the camera that needs to stay above 3V? Interesting.

Decent mate. Building a 1s HD Zero as well. Cheers very much!!

Think I'm finally ready to add HDzero to my arsenal in addition to DJI. It'll do perfectly on my whoops and 1s toothpicks!

Hurry up HD Zero 😜👌🏼🚀😍

Love this! I look forward to your build video. Thanks!

I was pretty excited to see your results after all this time. There is a new firmware for you to try that adds a 16x9 full mode (that uses the full sensor). You get vignettes on the corners, but way bigger FOV. Curious what you'll think of it

@MrShutterBug

2 жыл бұрын

My testing was somewhat delayed due to two faulty FCs in a row. Third time’s the charm. The new firmware sounds interesting. I’ll have to check it out.

Awesome little quad and Rippin my friend 👍🏼👍🏼

HD Zero is starting to look real great. Amazing that we now can have whoops with that quality of picture and control link with ELRS.

Nice to see you again, dude 🙂👍

Super excited can’t wait to buy one

Man Nate, so can't wait for more to come! Whoopin The Cbus is going to be amazing. Me and my friend TJ whoop race a couple times a week and to have HD is going to be epic. I have to get a new radio first then I will budget for it. Keep the videos coming. I'll keep my fingers crossed the manufacturers send you the latest and greatest. Have a great night...👍🏻🍻👊🏻 Oh yeah, I definitely hit the like button on the way in, it was so easy...🔥👍🏻🔥

Awesome video man! Thanks for being an inspiration

Nice to see great progress on the HDZero front. Very impressive camera, for how tiny it is. You mentioned it’s large sensor, so it must be a glass lens.

I can't wait

Yess! I can't wait for your build video! And I'll be keeping an eye out around July 4th to snag a couple boards. Thanks.

@MrShutterBug

2 жыл бұрын

That's when they ship out from HDZero. I don't know if stores will start taking orders at the some time. Some stores might take pre-orders ahead of time, and some might wait until they have the physical goods. Hopefully we won't have to wait too much longer either way.

Very cool, very exciting. I think 1s digital HD whoops are going to be a hit. I've been boost regulating the OG whoop board over 5 builds now 75mm 450mah and I can't wait to retire those regulators once and for all. Nice indoor flying example and excellent image for such a tiny camera lens. HDzero, take my money! :-)

Wow... outstanding piloting.

damn, digital fpv has come so far now, i can still remember when sharkbyte was being tested. however idk if anyone else feels this but the fov of the camera seems a tad small for me, maybe im just claustrophobic but i definitely dont think its bad and your amazing flying skills make it work. i do think it would be great on an outside quad though.

Very cool 😎 keep doing what you do ✌️❤️

Thanks very much for posting and your efforts are appreciated. PLEASE continue! Currently I'm using DJI for HD but of course its no damn use for 65's and in reality not that usable on 75's either. My current analogue outdoor/indoor set up has been carefully honed over time and gives good quality flicker free video all around my two story house with critically minimal motion blur even through three solid 9" brick walls and down the 80 foot back garden from the front room. Impressive though your set up is, IMO its at this stage a way short of me wanting to change over, but I suspect a year from now I'll see progress and think differently. Subscribed.

So cool. This has really got me wanting to a digital setup. I hope price drops even more. I'd love to a see a Collab between you and Nick burns 😉. Go micros!!

I want one! Noooow.

Very nice!

Welp, it looks wayyyyy better than some other system that was just released a couple of days ago.

Hi, nice camera I like quality Bro. 😉

Take note DJI. We need a 1s single PCB VTX for the new V3 goggles released later this year.

@Imakilln

2 жыл бұрын

DJI be like - Here you go! 3s-6S supported!

@changeagent228

2 жыл бұрын

@@Imakilln Lol. The Vista and AU are listed as 2s minimum but will work down to 5.5v. It's minimal effort to add a lower voltage regulator in their next release. The Vista and Air unit have a 3v rail driving the logic and a 1.1v rail driving the camera if someone was to rebuild the regular stage they could convert an existing Vista / AU to 1s.

@Imakilln

2 жыл бұрын

@@changeagent228 Yes I'm aware of how easy it would be for them - I was being sarcastic as this is DJI we're talking about...who never listen to their customers...and half arse everything...

@MrShutterBug

2 жыл бұрын

I don't think anybody doubts that DJI could make something amazing for 1S if they wanted to. However, they have not given us any indication that they do want to.

@changeagent228

2 жыл бұрын

Yeah we'll just have to see what scraps they toss us mere users lol

I see you still use the old ex0802 motors.. I can't wait to see the build video but lose part's are very expensive now you better off buy a complete model. But just brought the mobula7 1s with the new motors. I will see how it performance is. And I am going express elrs that is also new. Hopefully it doesn't get more expensive in the future.

Low voltage brownout is an issue with every camera but the Runcam nano 3 imo

🔥🤘Yyyahhhoooeee🤘🔥

That's awesome! You'll make me spend even more money on whoops now 😜

As usual, I set new goals for my next build with every new project you show me! BTW, you didn't mention the dry or AUW figures?

@MrShutterBug

2 жыл бұрын

A little under 23g dry with 0802 and BT2.0.

Dear friend, hello, the video was a good explanation, but I have a problem with the image of this camera in my HD zero glasses and I did a lot of research, but I did not succeed. Please leave a video about updating VTX and its steps for us newbies, thank you.

When will we get the babytooth

Nice. Can't wait to see DJI HD jet shrunk so much. I was wondering given your expertise in light builds... Would you know of a DJI HD FPV Quad that flies for 20m+ and is under 250g with battery for some light weight long range cruising?

@MrShutterBug

2 жыл бұрын

I don’t know which drone would be best, but I do know that LiIon batteries are the best way to get 20+ min flight times for cruising.

@engizmo

2 жыл бұрын

@@MrShutterBug yeah, and they tend to need 4 x 18650s that puts them over 250g 😥 in order to do 20+ I'm thinking there must be a quad out there that can do it all if you replace the 4 x 18650 with 4 x 18350. But seems like no one has tried this....

Seems like the osd information is pretty delayed. Is that expected to change at all?

@MrShutterBug

2 жыл бұрын

I don’t know. The OSD data is transmitted separately from the video and then it is rendered by the goggles. That means it isn’t at the same rate as the video. But I don’t know what rate that is exactly.

what size do you use for your goggles and vrx I already bought 3 vrx module v2 the first 2 just didn't power up anymore I used 3s lipo what happened

@MrShutterBug

2 жыл бұрын

You have VRX modules that don’t work? That’s the first problem I’ve heard about. I usually use a 1300mah 4S battery with mine. Sometimes I use a 6S racing pack if I happen to have one of those charged up.

Really excited for that 1s vtx Do you think 1s vtx is light enough for a babytooth? Are you ever going try to build a hd babytooth with that vtx?

@MrShutterBug

2 жыл бұрын

It is definitely light enough. If it can fly on tiny 31mm whoop props then it can fly on just about anything.

@faktionfpv3590

2 жыл бұрын

@@MrShutterBug does it need a capacitor like the previous whoop vtx?

@MrShutterBug

2 жыл бұрын

@@faktionfpv3590 I don’t think it needs one for 1S. Maybe for 2S or 3S? I don’t know what the official recommendation is. I got mine prerelease with no instructions.

Amazing rip! I was quite amazed with the video quality too. Am I right that the battery you used during that flight is now a goner?

@MrShutterBug

2 жыл бұрын

I haven't tried flying that particular battery again. It will probably still work, but may not hold as much charge as it once did. Fortunately, 1S batteries aren't that expensive.

@neilfpv

2 жыл бұрын

@@MrShutterBug Cool!

What's the weight without the battery?

@MrShutterBug

2 жыл бұрын

Just under 23g

Do you have a stl for the canopy?

@MrShutterBug

2 жыл бұрын

Yes. I’ll share it with the build video later.

Vtx transmission res 720p , can I choose 1080p vtx video tx for high end goggle having 1080p screen for top notch hd flying experience???

@MrShutterBug

2 жыл бұрын

HDZero does not currently support a 1080p high resolution mode for transmission. It is always 720p transmission. The receiver on the goggles can output 720p or 1080p, but that just controls the HDMI format. It doesn't change the amount of detail you see. Now, they are working on some new goggles that will be optimized for HDZero. I don't think they will increase the amount of detail, but they will decrease the latency even more, which is exciting!

@dcvshambhu

2 жыл бұрын

@@MrShutterBug nice answer.. but 1080p would be better.....

are you flying in angle mode?

@MrShutterBug

2 жыл бұрын

Yes

his patches are lit?

@MrShutterBug

2 жыл бұрын

Are you referring to the green glow? That comes from the HDZero VRX. I have a prototype sample with translucent white plastic, so the light actually shines through. Feature?

Nate are you using das???

@MrShutterBug

Жыл бұрын

I assume you are referring to Dual Axis Steering. No, I have not been using it lately because I have been using Betaflight 4.3 for my HDZero builds.

This is fantastic. Makes me feel the itch to upgrade all my quads to HD zero and abandon pure analog.