Пікірлер

• 
  @darthwarren45995 күн бұрын

  I just got a shure v15 type 3 and it’s amazing. I run a v15 type 4 and 3 and m95ed and they all sound good

• 
  @ejcheck5 күн бұрын

  They were great cartridges. The V15III was considered to have been the peak of the line

• 
  @dragon-wd3dj6 күн бұрын

  Im planning to install a one in my350 2010 do you recommend it have you had any problems

• 
  @ejcheck6 күн бұрын

  The '10 is long gone but I still use K&N filters. Currently in my '22 GX460 and my Wife's '22 ES350 FSport. I clean them at 20K mi

• 
  @joemartin64398 күн бұрын

  Vague where your new motor came from

• 
  @ejcheck7 күн бұрын

  I found it on eBay. I believe it came from Germany or Switzerland, which is why it had the 50hz pully

• 
  @successstudy45115 күн бұрын

  Your video is wonderful and very informative. I love watching your video. But you can't get organic views or subscribers. I have some suggestions for you.

• 
  @caracarolina73215 күн бұрын

  Where did you get the spare parts

• 
  @ejcheck15 күн бұрын

  I called Ames customer service. Sometimes they'll supply them no charge

• 
  @donniecamp732817 күн бұрын

  thanks

• 
  @ejcheck17 күн бұрын

  I hope it helped

• 
  @agencjaad698018 күн бұрын

  Ja nie widzę różnicy.

• 
  @ejcheck18 күн бұрын

  As I said in the video, the differences to me were not great, and as we get older (I'm 73) they will be less noticeable. All 3 cartridges sounded great. I still use the V15III on theThorens and the Black LVB 250 on the VPI. I keep the Bronze stylus as a spare

• 
  @agencjaad698018 күн бұрын

  @@ejcheck I am 66 years old, I use 2M Blue. As for the remaining equipment: Audiovector R3 Signature, Unison Research Unico Due, Pro-Ject Classic, but I have the Gigawatt PC3 SE conditioner and Tara Labs cables. Listening to music is poetry! Mainly vinyl. I have a Monrio CD with a Philis Pro2 drive. Regards.

• 
  @ejcheck18 күн бұрын

  @@agencjaad6980 I only listen to and buy LPs. Heavy into Jazz and good Old R&R (60's & 70's)

• 
  @ejcheck18 күн бұрын

  @@agencjaad6980 The 2M Blue is a lovely cartridge. The nude stylus is a major difference over the Red. I have one on a U-Turn Orbit I picked up for it's low [profile for the living room to keep the wife happy with her dceorating\

• 
  @agencjaad698018 күн бұрын

  ​@@ejcheck Pozdrawiam. Moja żona (20 lat młodsza) też słucha muzyki. Zaraziłem ją tym poniekąd drogim, ale nad wyraz fascynującym zajęciem. Pozdrawiam i długich lat słuchania. Regards. My wife (20 years younger) also listens to music. I introduced her to this somewhat expensive but extremely fascinating activity. Best regards and long years of listening

• 
  @Djevan41598Ай бұрын

  Does the magetic mount work with a smartphone with a otterbox

• 
  @ejcheckАй бұрын

  There is a metal plate that you place between the phone and case.

• 
  @samuelrobinson7893Ай бұрын

  Beautiful firearm sir! Thanks for sharing

• 
  @ejcheckАй бұрын

  Thank you, it has been dependable and accurate

• 
  @careystuart3 ай бұрын

  That's the top plate from/for a TD 165, isn't it?

• 
  @ejcheck3 ай бұрын

  I believe that they are the same. It is different from the original top plate but I assumed it was just 1 of several designs I had to pick from

• 
  @trevorsamuels54703 ай бұрын

  To Factory Reset Jasco Z wave ZW-4101. Make sure the Device is On (I used a lamp to see that the Device is On) then press and hold the front button for 3 seconds.

• 
  @lycett644 ай бұрын

  I have a l g c 2 65 inch oled tv. And a Yamaha rx- v 677 AVR ITS BEEN OK FOR TWELVE MONTHS NOT IM HAVING NO SOUND FROM MY DEVICES THROUGH ARC. ANY IDEAS?

• 
  @ejcheck4 ай бұрын

  1- I stopped using the ARC 2- As you can see in the video I had to shut down all of the smart features. 3- I'm now using a Samsung TV which has a similar but easier to handle issue. I now just use them as monitors, and keep the TVs off the network 4- The switch to the Samsung was prompted by a cracked screen that occurred while cleaning my 45. The bushing got away from me and flew 20' and cracked the screen.

• 
  @lycett644 ай бұрын

  @@ejcheck did you use optical for the sound?.

• 
  @ejcheck4 ай бұрын

  No, my preference is to use the Receiver for switching. I use a Firestick with KZread TV for my main source with Blu-Ray and Google Chromecast on the other Receiver HDMI inputs, I do no switching on the TV, the receiver sends the sound to the speakers and the video to the TV. There is no need for optical video

• 
  @lycett644 ай бұрын

  @@ejcheck so how does the receiver send the sound.”

• 
  @ejcheck4 ай бұрын

  @@lycett64 The same way the TV would send the sound. ARC simply allows the 2 way communication between the TV and the receiver. ARC is only needed if you are using the TV as a program source. So, if you have the Blu-Ray plugged into the TV you need the ARC to get the sound to the Receiver. If the Blu-ray is plugged into the Receiver you do not need the ARC. It sounds like you need to review some basics on HT setup and sources.

• 
  @qd884 ай бұрын

  Good video.

• 
  @ejcheck4 ай бұрын

  Thank you

• 
  @ShorrockPaul4 ай бұрын

  did the rainX make a difference ?

• 
  @ejcheck4 ай бұрын

  It's hard to say, because I really didn't have an issue before but since it does repel water well on windshields it at the very least doesn't hurt in this application

• 
  @christiansonner57494 ай бұрын

  Plz talk a little bit slower!!

• 
  @Ricky-cl5bu4 ай бұрын

  The first two carts had too much treble the last one was more realistic that’s only my taste some people like that false tis ‘‘tis it’s treble sound

• 
  @Ricky-cl5bu4 ай бұрын

  The shure v15 was my favourite

• 
  @ejcheck4 ай бұрын

  mine too

• 
  @josephsaucedo86914 ай бұрын

  a parts express direct replacement woold be a bash 300 watt class d amp plate if possible making enclosure vented for amp plate then use a aluminum plate and put a set of banana plug and seal sub box it will last longer never good to mount amp in box ever.

• 
  @davidfranklin45345 ай бұрын

  Thanks for sharing.

• 
  @jedi-mic5 ай бұрын

  rca cables that come with it are correct they have to be below 50 ohms, I think the ones you got are 75 ohms this is a mistake people make, if you want to replace the cables get triple shielded microphone cable and 50 ohm RCA plugs. what you can do with the plastic box that goes over the RCA cables, and I think it's over the mains cable, put some copper tape inside the box and make sure it touches the chassis that will stop your hum

• 
  @ejcheck5 ай бұрын

  Thanks, all good advice. It turned out that 1 of the cables was bad and too long. I shortened the cables which got past the issue and all is good. It turned out that I also had a dead suspension spring, replaced those as well

• 
  @empedance19335 ай бұрын

  Have you still had good luck with these a year later? I just ordered a Dayton Sa100 plate amp from them to fix an old Cambridge Soundworks Basscube 8 subwoofer with a dead amp (did make sure to take measurements of the current amp and cutout haha) and it should be here by Friday! I’m not super worried since most of the reviews are positive and there’s a 5 year warranty as well but I’d love to hear if there’s been any issues since you published the video

• 
  @ejcheck4 ай бұрын

  All 4 replacement amps are functioning well. The longest-running is about 10 years old.

• 
  @xeepers5 ай бұрын

  Oh my God ! I don't need to hear your life story. Just tell me how to reset it.

• 
  @ejcheck5 ай бұрын

  Thanks for watching

• 
  @gtjgoldenoldies69355 ай бұрын

  This also works on newer consoles ps4, Xbox one, ps5, Xbox series

• 
  @SimonLloydGuitar5 ай бұрын

  its pronounced Torrenz...drives me mad

• 
  @Freedom899845 ай бұрын

  I did some restoration on my TD145 mkII. Didn’t change anything at the bottom and inside, just glued the plastic wire holder back on. I don’t believe that extra damping will help improve the sound that much, my Thorens is placed on a 30 millimeter MDF shelf mounted at the wall. I want to keep my Thorens as original as possible. New belt, cartridge, connectors. Shaved a bit material of the pully as the TD145 was a bit fast. You need a balance to adjust the counter weight, it’s not very accurate to set the arm at 2 grams.

• 
  @ejcheck5 ай бұрын

  I agree that a scale should be used to set the correct tracking force

• 
  @DeciduousNature5 ай бұрын

  Is "friction" the only thing that holds the Access Point in place in the tube? Or is there something more holding it? Said another way: when you want to remove the Access Point from the mount...do you just yank on it? Is there a risk of it becoming loose eventually?

• 
  @ejcheck5 ай бұрын

  you missed it. I did not use the backing plate above the ceiling. I used screws and anchors (longer than those supplied) to hold the mount in the ceiling (plaster) and the magnetic cover plate hides them

• 
  @DeciduousNature5 ай бұрын

  The screws and anchors hold the mount in place, but what holds the actual Access Point in place? Am I missing a part where the AP is screwed into the mount?@@ejcheck

• 
  @ejcheck5 ай бұрын

  @@DeciduousNature Sorry I misunderstood,. It was a nice snug fit. It is not going anywhere.

• 
  @bltefft5 ай бұрын

  Got mine today. Will install it tomorrow.

• 
  @bongnp5 ай бұрын

  What rca cables did you go with? About to replace mine.

• 
  @ejcheck5 ай бұрын

  I used Amazon Basics and cut the RCAs off one end

• 
  @rickeyboatright62376 ай бұрын

  As an ex cop, the surprise factor will beat the rapid removal every time. I just bought one of the holsters but haven't gotten it in yet. I don't want to look like I am carrying a weapon. This holster does that. I would be over looked or underestimated until it is too late. Again, the element of surpise in some situation would be on my side. On other situations it wouldn't matter anyway. That's where situational awareness comes in.

• 
  @ejcheck6 ай бұрын

  I've only been questioned 2x in the 10yrs since I did this video. Both times it was by someone who was familiar with it. LOL

• 
  @rafars22462 ай бұрын

  You can't really name any real scenario where you need that element of surprise. It isn't the 18 hundreds...

• 
  @rickeyboatright62372 ай бұрын

  Apparently you've never been an officer on the street.

• 
  @rafars22462 ай бұрын

  ​@@rickeyboatright6237 apparently, you're no longer an officer on the street. If you're not after the criminals, the surprise factor is 99.99999% unnecessary.

• 
  @rickeyboatright62372 ай бұрын

  With what expertise or training do come to this belief. I can point out many videos of robberies where the criminal was surprise by what they believed to be a non threat. That's the point, don't look threatening until you have to to set the other on the back foot. Yes, I've been shot at and in those situations that you say don't exist. So stop playing armchair quarterback.

• 
  @skumnjepf6 ай бұрын

  Your voice is totally distorted😮

• 
  @CapybaraLover-ku2dc15 күн бұрын

  try turning up the value

• 
  @allenwilliams89626 ай бұрын

  if you had to only live with one set would you chose the JBL's or Klipsch?

• 
  @ejcheck6 ай бұрын

  Both are fantastic speakers and I'd be happy with either. But, I'd have to say the Klipsch if I could only have 1. I've loved them for 30yrs

• 
  @allenwilliams89626 ай бұрын

  @@ejcheck awesome cause I have forte IV’s

• 
  @ejcheck6 ай бұрын

  An awesome speaker, it will outlive you

• 
  @inko1236 ай бұрын

  My 250 LVB lasted two years before having to be replaced. I switched to the original 2M Black, and the difference is very evident in the SQ.

• 
  @user-bm4nu4jh1p6 ай бұрын

  Спасибо вам.

• 
  @ejcheck6 ай бұрын

  Your welcome

• 
  @user-bm4nu4jh1p6 ай бұрын

  @@ejcheck 🤝

• 
  @troyheffernan12616 ай бұрын

  Why did you have to take your TV off mute volume when your reciever has a volume of it's own.

• 
  @ejcheck6 ай бұрын

  Bad phraseology on my part. You are correct, the sound comes from the receiver in surround. I meant to say I took the receiver off of mute. Thanks for the catch

• 
  @troyheffernan12616 ай бұрын

  @ejcheck merry Christmas bro

• 
  @Andromeda_M316 ай бұрын

  My new (and expensive) 65" LG OLED and Yamaha V-685 (which I've had connected to countless TVs) doesn't seem to work. When I use the different surround sound programs on the receiver, it goes to "STRAIGHT" sound.

• 
  @ejcheck6 ай бұрын

  You don't say what your source is and whether it is plugged into the TV or the receiver. I plug my sources into the receiver and I have no issue with surround sound programs.

• 
  @REXXSEVEN6 ай бұрын

  This was demonstrated using a Keurig K500 series brewer.

• 
  @ejcheck6 ай бұрын

  I believe this hack is no longer needed for the newer machines

• 
  @chrispicquet7336 ай бұрын

  Funny, I'm doing the same project! I picked some nice cabinets on eBay. Picked up some K700 cast horns, I have vintage alnico EV T 35( K 77) tweets, EV 1823, and 1824 compression drivers,choice of vintage EV SP 12B, original Chrome Frame Alnico SP 12's, JBL MI 12's. Cool Stuff.

• 
  @ejcheck6 ай бұрын

  The only change I'd suggest is switching the tweeter lenses to Dave Alts MAHL lenses (with the L-pad). I did this when My Forte II lens fell apart and liked the difference enough to do it in the Heresy. Both sets of speakers sound fantastic! kzread.info/dash/bejne/g4urysOYnNWWqLg.html

• 
  @stanleywollman86167 ай бұрын

  Thank you

• 
  @ejcheck7 ай бұрын

  glad it helped

• 
  @SkywalkerPMs7 ай бұрын

  Just installed a Valentine V2 in my '22 with this vid! Thanks. The Blendmount was the hardest part!

• 
  @ejcheck7 ай бұрын

  I just had the leads come loose while on a trip, my window had been replaced and it appears the knocked the wires a bit. I needed the video to recheck the wiring. LOL Enjoy the Valentine

• 
  @cian44687 ай бұрын

  Thanks! You made it easy 😊!!

• 
  @joemartin64398 ай бұрын

  Love watch your videos

• 
  @ejcheck8 ай бұрын

  Thank you

• 
  @joemartin64398 ай бұрын

  Elliot , I have Isonic also it is fantastic, I compare it to quietness of CD’s on my TD160 , love to get a new motor for it ,like you bought in Europe

• 
  @ejcheck8 ай бұрын

  Be patient on the motor, one will turn up. I had a friend visit and sat him down to hear my system, his 1st comment was where's the surface noise?

• 
  @joemartin64398 ай бұрын

  Hi Elliot great video. Please where to get a new motor

• 
  @ejcheck8 ай бұрын

  Sorry, I should have been clearer. I found it on eBay.

• 
  @joemartin64398 ай бұрын

  Where did you source the motor in Europe

• 
  @joemartin64398 ай бұрын

  Wonder where how to get a new motor

• 
  @joemartin64398 ай бұрын

  Where did you order your new motor, second time I ask good guy

• 
  @joemartin64398 ай бұрын

  Where did your motor come from How much for motor and pulley

• 
  @ejcheck8 ай бұрын

  It ran about $130. It came from Eurlope which is why I had to change the pulley

• 
  @joemartin64398 ай бұрын

  Please tell where your new motor and pulley came from

• 
  @ejcheck8 ай бұрын

  The pulley was the easy part. Audiosilente.com makes them. Check their site. The motor took patience on ebay

• 
  @danielrousseau48428 ай бұрын

  I also use my thumb to open the flap as my hand reaches for the piece. When I'm wearing my shirttail on the outside of my belt, I never allow it to cover up my holster. I tuck it above the holster. Sneaky Pete is a great holster for concealed carry. I have two of them.

• 
  @spider_venom23778 ай бұрын

  Man I’m a broke college student and even after 9 years since u posted this you are helping people. I just saved $20 that I can use for transport to school and work now 😄