Пікірлер

• 
  @deankdx2 күн бұрын

  new member, I stumbled upon your XP ute resto (blue) and your channel is pretty cool. currently watching the "car restorations" playlist, and found the gutter repair on the patrol particularly interesting, as i have a mazda van that needs at least the roof corners repaired that may be similar in layers also.

• 
  @rigelrogers52649 күн бұрын

  Cheers heaps mate As a 22 yr old no money due to lack of work (disabilities) however thankfully I've just pickup an xe ute no running gear needs alot of work but hopefully you can help guide me along the journey of the restoration cheers

• 
  @TwistedMetalCustoms9 күн бұрын

  Hi mate, thanks for the comment! I'm glad you got a project mate, I'd be happy to help you as much as I can! I've got plenty of videos with information that can get you well on your way, but I am only a comment away with any questions you might have too, so feel free to reach out anytime mate, welcome to TMC 🍻

• 
  @goldshiftgarage14 күн бұрын

  good video there Twisty, its sure coming along fast now. Looks like you n me will be doing the 6Pack challenge in no time. WB vs XW 😁 Keep up the good work

• 
  @TwistedMetalCustoms14 күн бұрын

  Thanks Lee! Yeah pretty excited to get it completed.. bit worried what your engine build is going to be though, you have been very secretive haha, Holden vs Ford.. icons of Australia 🇦🇺, anyone wanting similar content to mine, go check out Lee at Gold Shift Garage for a beauty WB ute build !🍻

• 
  @raysanderson786514 күн бұрын

  Nice work mate the rattle in your shed is probably the flashing. Keep up the awesome content.

• 
  @TwistedMetalCustoms14 күн бұрын

  You are spot on brother, haha it annoys me but doesn't happen too often so I don't fix it hahaha 😜, one of those jobs on the to do list 😄

• 
  @ryanphotostudio14 күн бұрын

  Hey mate recently found your channel and you are doing some very good instructional content. Just a thought with that shed vibration- if you have a bit of left over CarBuilders sound deadener or aimilar lying around you can stick that on the offending panels in the area you think is the worst culprit and it will dull the sound right down and get rid of that high frequency vibration I reckon. Might be worth a try. Cheers mate

• 
  @TwistedMetalCustoms14 күн бұрын

  Welcome Ryan! Thanks mate, thanks for finding TMC, that's a bloody good idea mate 💡, I think its the flashing flaps between the pop rivets haha, but I'll keep that in mind and thank you, cheers 🍻

• 
  @theaussienurseflipper.811314 күн бұрын

  I'm new to your channel I prefer talking then some crappy music play really loud but that's just my personal opinion. Sometimes people want these late at night and they keep turning the sound up and down so that I wake their family up just a tip for you, cheers Graham

• 
  @TwistedMetalCustoms14 күн бұрын

  Welcome to TMC Graham, glad you are here! I appreciate the feedback about the commentary and music, it is my "pet hate" too having to turn down music and back up for voice! i try to eliminate most loud noises but ill do further checks before i release to make sure, but i think overall most feedback has been that everyone like the talking too! so that's great, ill incorporate it more into my channel. thanks for the comment and joining TMC mate 🍻 ~Twisty

• 
  @theaussienurseflipper.811314 күн бұрын

  @@TwistedMetalCustoms thx mate

• 
  @LyelSainsbury15 күн бұрын

  Is it true that you have to overlap the repair section to existing in Australia

• 
  @TwistedMetalCustoms15 күн бұрын

  Hi Lyel, I think it's depending on state to state, I know WHEN you do an overlap repair it needs to be a certain lap amount (15mm??) But not 100% sure depending on what state. Maybe it's talking about if you are replacing whole sections that uses the spot welds and lap joins on all sides. I am not doing lap joins, terrible for future rust, I'll just go through engineering if need be to get it signed off in worst case. (Or do the repair well enough so it's not noticeable haha)

• 
  @RestoHubAU17 күн бұрын

  Great job as always mate!

• 
  @TwistedMetalCustoms17 күн бұрын

  Thanks legend 🙏 🍻

• 
  @minishoey78417 күн бұрын

  Awesome video again Legend! Can't wait to see more! Well done!

• 
  @TwistedMetalCustoms17 күн бұрын

  Thanks Shoey! 🍻

• 
  @bazzra6917 күн бұрын

  Good job, love the voice-overs

• 
  @TwistedMetalCustoms17 күн бұрын

  Cheers Bazzra 🍻

• 
  @john2ndname17 күн бұрын

  Good job...totally agree!..only cut out what you need to cut out!...PS sounds like a loose screw on that panel on the shed ...cheers

• 
  @TwistedMetalCustoms17 күн бұрын

  Cheers John, yeah it makes it a bit easier hey, yeah could be a loose screw, I think it's the flashing somewhere haha .. was so frustrating 🤣 🍻

• 
  @russelblackwell604117 күн бұрын

  Nothing better than to watch your videos during our Shytttt Victorian weather wonderful work as usual keep safe champ

• 
  @TwistedMetalCustoms17 күн бұрын

  Thank you very much Russ, hope the weather gets better! Cheers legend 🍻

• 
  @michaelharrison50018 күн бұрын

  Great video as always The commentary was also great Those aftermarket panels look like fun But at least they’re available My 62 Vanguard Ute has no aftermarket panels available so it’s all home made Yes please on the shop course Cheers Michael

• 
  @TwistedMetalCustoms18 күн бұрын

  Hey mick, thanks for the feedback and yeah sounds like a big project you have making all those panels, thanks for the interest in the course also, but the course will be in the Plainland, qld area .. is this somewhere you could get to in person?

• 
  @michaelharrison50017 күн бұрын

  @@TwistedMetalCustoms cheers mate Sadly no a bit far away for me at this stage Oh yes the joys of non mainstream cars But hey they’re different

• 
  @TwistedMetalCustoms17 күн бұрын

  @@michaelharrison500 ah no worries, ill work on more custom shaping and stuff in future episodes if i can , that may help you a bit hopefully!

• 
  @michaelharrison50017 күн бұрын

  @@TwistedMetalCustoms it’s all good mate

• 
  @jamesreardon858518 күн бұрын

  like the commentary mate

• 
  @TwistedMetalCustoms18 күн бұрын

  Thanks Reardo, i swear ill get less awkward the more i do it hahaha

• 
  @ChrisArmstrong-ir3fg19 күн бұрын

  Good one twisty, I like how you’re honest about the Ill fitting panel, and how you had to modify it to fit. I also like how you mentioned the relief cut. Keep those tips coming mate. p.s - sign us up for the shop class Cheers mouse

• 
  @TwistedMetalCustoms19 күн бұрын

  Hey Mouse, will do mate, sounds like a plan! Cheers 🍻

• 
  @jeffhowell309325 күн бұрын

  Yep Rust Repairs for me as well. Thanks very much.

• 
  @renatovieiramachado789228 күн бұрын

  Buddy, how is after 4 months?

• 
  @TwistedMetalCustoms28 күн бұрын

  i actually ran out of glue at the end of this video, and by the time i came back to it a few weeks later i decided to take it off and do some customisation to the dash haha.. the 2nd time i ended up using Raptor coat thinned down and it came up awesome, great factory texture, ill try to do another dash with raptor and record it for you 🍻

• 
  @shanedavies9564Ай бұрын

  Love it mad max revisited lols , cheers , shaneo Nelson NZ 👍🍺

• 
  @TwistedMetalCustomsАй бұрын

  Thanks Shaneo! I wish it would be in the mad max movie haha 😄 🍻

• 
  @animal_engineeringАй бұрын

  cool as, the rat rod look i think has saved me as I learn with my van, that tub looks like one of them mini trucks where are they now, someone probably spent a crap ton of money on a build years ago that, that was part of

• 
  @TwistedMetalCustomsАй бұрын

  Haha yeah it's more forgiving 😅, good learning curve though! Yeah I think it was a decent drag ute before, I'll make it work haha

• 
  @StarlightWorkshop0zАй бұрын

  Ford triton??

• 
  @StarlightWorkshop0zАй бұрын

  Mazda? Bt50??

• 
  @TwistedMetalCustoms29 күн бұрын

  Ford/Triton/holden/chevy ... plenty of parts to make a name out of haha.. what about "Foriton" or "Triford" haha

• 
  @michaelharrison500Ай бұрын

  What a beast Sounds great

• 
  @bruceaskin9645Ай бұрын

  I am running the same engine in my 92 Fairlane . Those oxygen sensors play a big part when its fully computerised. Air filter tube came loose once and it became undrivable. Would start and rev fine , but soon as it went into gear would die. Had me puzzled for a few days , didnt actually notice until the thing fell off completely.

• 
  @TwistedMetalCustomsАй бұрын

  Nice Bruce! I'm still yet to put my 2 X o2 sensors in mine, I got the rest in now... but having issues with oil pressure and water temp.. not showing anything, even after I replaced the sensors , got me puzzled

• 
  @bruceaskin9645Ай бұрын

  @@TwistedMetalCustoms Speaking of pressure , mine kept building up crankcase pressure. Which blew out the sump gasket and was blowing oil through the breather into the throttle body. Turned out to be a clogged filter below the PCV. It is now removed altogether. Made a video about it.kzread.info/dash/bejne/jH2mz8FwobG1p7A.htmlsi=TLbpvU-rIBl_cet8.

• 
  @goldshiftgarageАй бұрын

  man that looked like heaps of fun!! good to see it running

• 
  @TwistedMetalCustomsАй бұрын

  Yeah it was fun! So happy it's driving now!

• 
  @jamesreardon8585Ай бұрын

  Why not make a fuel tank and "stacks" to fit in between the cab and the "tray" mate, great project.

• 
  @TwistedMetalCustomsАй бұрын

  Hmm. . . . Thats not a bad idea Reardo! 🤔 I like where your head is at, cheers brother 🍻

• 
  @charlietabone6162Ай бұрын

  The XW videos are good to watch and you’re doing a real good job credit to you

• 
  @TwistedMetalCustomsАй бұрын

  Thank you Charlie, I appreciate it mate 🍻

• 
  @goldshiftgarageАй бұрын

  its taking shape really good mate, well done👍

• 
  @TwistedMetalCustomsАй бұрын

  Thanks Lee! 🍻

• 
  @perpetualgrin5804Ай бұрын

  It too was my dream car back in 1983. Fond memories of that ' 265 '.

• 
  @jasminhoffmann8791Ай бұрын

  Park them bogan busses back in the paddock bro and clear the shed for the sil80! #JDM 4LYF.. Love Formby x.

• 
  @TwistedMetalCustomsАй бұрын

  😄 🤣.. cheers Formby, when you get yours going we will do a track/cruise day episode together ❤️ 😉

• 
  @danielwatson2910Ай бұрын

  Is there any 125mm Velcro backed sanding discs you can recommend. I’ll add them to my order of your other zirconia discs.

• 
  @TwistedMetalCustomsАй бұрын

  Legend, let me get to my pc and I'll update my items on my web page, if there is anything else just let me know, I really appreciate your support! 💪 🍻

• 
  @TwistedMetalCustomsАй бұрын

  I added a full range, decent all rounder sanding disc's, also a interface pad for curved panels if needed mate 👍 🍻

• 
  @danielwatson2910Ай бұрын

  Don’t doubt yourself. Keep doing what you’re doing, making videos. We will keep watching. Sooner or later people will wake up to your content and your channel will go off.

• 
  @TwistedMetalCustomsАй бұрын

  This is the best comment.. thanks Daniel, means alot mate 👍 , and I'll do just that! I'll just put more effort in too! 🍻

• 
  @nikkistirling5719Ай бұрын

  Hey mate. Love all your content and the rust repair vids are excellent. Would be great to see where you are up to on the CM Valiant resto. Great stuff you are doing here!

• 
  @TwistedMetalCustomsАй бұрын

  Hey Nikki! Thanks so much for the comment and feedback! Ah the CM, I've got to save either 13k for a new 5 sp manual , OR find a usable automatic box, once I get the box I can then drop it in and make engine mounts haha,, sooo close, but so far due to $$$.. Sorry it's been long since last cm video, got to just save bulk money somehow now haha

• 
  @RyanDunn-nv2hzАй бұрын

  Hemi performance do the conversation engine mounts but you’ve gotta use the v8 k frame lots of guys make there own mounts and center the big block to get it away from the booster I have the hemi performance mount but have not yet tried

• 
  @TwistedMetalCustomsАй бұрын

  Thanks for the comments matey, I originally bought a set through hemi performance, bit it was 6 weeks later then they said they lost the CAD file to make them so they couldn't help me, I think I'll have to try to make my own I guess haha

• 
  @RyanDunn-nv2hzАй бұрын

  Hemi performance do the conversation engine mounts but you’ve gotta use the v8 k frame lots of guys make there own mounts and center the big block to get it away from the booster I have the hemi performance mount but have not yet tried

• 
  @samcross7337Ай бұрын

  Definitely keep going on the rust repairs, I’m doing an xr that’s very similar state…I look forward to them!

• 
  @TwistedMetalCustomsАй бұрын

  Okie doke! Thanks for the feedback mate 👍

• 
  @maxd4196Ай бұрын

  I’m enjoying the XW series.

• 
  @TwistedMetalCustomsАй бұрын

  ok thanks mate , cheers for the feedback!

• 
  @bazzra69Ай бұрын

  For me, rust repair on doors as that is what I'm doing ATM

• 
  @TwistedMetalCustomsАй бұрын

  ok mate, no problems, what are you working on ?

• 
  @goodsagoodman-rq9nwАй бұрын

  Rust repairs #1 and whatever else mate it’s all good👌🏻

• 
  @TwistedMetalCustomsАй бұрын

  rogie! cheers matey 🍻

• 
  @russelblackwell6041Ай бұрын

  going to be better than rolled out of the assembly line what a body to work with for its age great work mate

• 
  @TwistedMetalCustomsАй бұрын

  Thank you Russ! i just hope it looks presentable at the end haha!

• 
  @RestoHubAUАй бұрын

  Fantastic work mate. Nicely done with great heat control, turned out great. With your question about the content, keep doing what you've been doing. 🤙 Btw...solid beard there that doubled up nicely as a mic prop 😎👍

• 
  @TwistedMetalCustomsАй бұрын

  Thanks heaps legend! ok ill keep getting into the xw rust! (i may just have 1 video update of the jailbar, but THEN right back into the falcon haha, yeah my beard is out of control atm 😬😂

• 
  @michaelharrison500Ай бұрын

  Definitely the rust repairs for me too I have several difficult rust repair jobs coming up And yes please show sorts of what else is going on Cheers Michael

• 
  @TwistedMetalCustomsАй бұрын

  OK no problems at all, thanks for the feedback mate! 👍

• 
  @jamesreardon8585Ай бұрын

  either way, like to see your progress on the jail bar

• 
  @TwistedMetalCustomsАй бұрын

  awesome Reardo!, im actually happy to show it, pretty stoked on how far its come along!

• 
  @ChrisArmstrong-ir3fgАй бұрын

  In my opinion, Keep up with the rust / body work videos mate, Maybe throw up some short videos doing minor work on your other projects, but it’ll mean more time filming and editing. One thing I do when welding a large piece in is to brace it on the back of the job .... for example, using a scissor jack and a thick flat piece of steel to push the two pieces out. Keen to see the Barra up and running, also the jailbar Cheers mouse

• 
  @TwistedMetalCustomsАй бұрын

  Hey Mouse, ill still continue the rust repairs and record them, ive just got some footage of the jailbar and skyline reveal i was thinking of showing, probably just 1 episode then back into rust repairs?, that is really good advice about the bracing too, i didnt think of that! good info