Пікірлер

• 
  @gabrielaples69422 сағат бұрын

  next week my G3S its going to be shipped! excited!!

• 
  @DirtyMikeTM5 сағат бұрын

  Does G3S have this, also does this mean we don't need a tuner pedal? How accurate is it?

• 
  @Claude7710 сағат бұрын

  Can you send One CC at footswitch press and one CC at release?

• 
  @michel-yveskochmann15163 күн бұрын

  Hi there. My Mac is not a M1 but my iPad Pro is … any chance it should work ? Thank you And congrats for this awesome stuff you made … ❤

• 
  @carlthomas993 күн бұрын

  Boss GX-100 EQ's are wonderful, into a Tube Amp, of course.

• 
  @albertpou24734 күн бұрын

  Hi, with this pedal can I connect one head amp to two speaker cabinets 1x12? Thank you.

• 
  @TheGigRigDaniel3 күн бұрын

  Hi Albert, you would do that direct from the amp, just make sure you get the impedances correct 👍

• 
  @albertpou24732 күн бұрын

  @@TheGigRigDaniel Hi, thank you so much for answer! 😊 My amp has only one cabinet exit. (Just one jack connection 8 Omw). My question is: Exists any system, to connect two separate cabinets 1x12 both with same impedance? In that conexion? ( I have two cabinets 1x12 with Greenbacks 25w 8 Omh) thanks!

• 
  @InTheHidden6 күн бұрын

  hey, is it possible to utilize bluetooth for connecting a wireless midi pedal like the Boss EV-1-WL? I'm trying to get it to work ;)

• 
  @TheGigRigDaniel3 күн бұрын

  Hi, if you mean to use it as a wireless midi expression pedal, not at the moment, but it’s possible 👍

• 
  @InTheHidden3 күн бұрын

  @@TheGigRigDaniel yes exactly, hope u guys make it possible ;)

• 
  @SOBRANTE4098 күн бұрын

  I'm assuming you run multiple fx through each patch?

• 
  @TheGigRigDaniel3 күн бұрын

  You can do, or single, depends on how you’re wanting to use it

• 
  @i.shadrin9 күн бұрын

  Let me guess - it's a switch mode power supply?

• 
  @TheGigRigDaniel3 күн бұрын

  The mains supply that comes with it is a heavily filtered switch mode supply but if you prefer a traditional supply you can use that too! 🤓👍

• 
  @fatbastard122910 күн бұрын

  Great demo! Just found a Thorpy with the original Muffroom name. Amazing enclosure and sound.

• 
  @Loopyllu36510 күн бұрын

  hey, i ve got a question regarding midi with the G2 and whammy V I've got them set to the same midi channel but each time i click a preset ON THE G2 it swicthes the settings on the whammy V and i cant seem to select what preset i want it to be on the G2 If that makes sense???? Foot switch 1 will make the whammy go to 1octive up but i want that to happen on footswitch 7 but im not sure how i can change this

• 
  @nandoholgado305011 күн бұрын

  Hi Dan! Is this implemented on the g3s?

• 
  @TheGigRigDaniel10 күн бұрын

  Absolutely 👍 it’s in the ABY BABY, HumDinger, and G3 (Inc G3, G3S, Atom and AtomS)

• 
  @nandoholgado305011 күн бұрын

  Hi Dan! What a cleverly made machine!! I have a question, do it allows you to put parallel effects, for having parallel reverb or delay in a mono signal? I think it's the only thing i love of my current ES-8 hahaha. I'm wishing to earn enought money to buy one of your G3s!! By the way, it would be so freaking good to have an european dealer to avoid taxes of importing from UK! Wish the best for you, guys!

• 
  @TheGigRigDaniel11 күн бұрын

  Hi Nando, yes, the parallel stuff in G3 is great. We have a dealer in Germany, Loopers Paradise. Cheers mate 🤓🙏

• 
  @NHail11 күн бұрын

  gamechanger!

• 
  @TheGigRigDaniel11 күн бұрын

  Thanks so much 🙏

• 
  @NHail11 күн бұрын

  would this work to control 2 pedals in the amp fx loop such as delay and tremolo? if so, would you recommend the buffer in this case?

• 
  @TheGigRigDaniel11 күн бұрын

  Hi, the new Remotest Loopy2 has a switchable buffer inside for exactly this 🙏

• 
  @JMV-KelsMikey12 күн бұрын

  i wanted this but is not being sold in Australia :(

• 
  @TheGigRigDaniel11 күн бұрын

  Hi, we have a few dealers in Aus and also ship direct to Aus every day. Cheers mate 🙏

• 
  @JMV-KelsMikey11 күн бұрын

  @@TheGigRigDaniel may i know which dealers in AU you have?

• 
  @michel-yveskochmann151614 күн бұрын

  I have a strange issue : no problem with syncing with midi clock - but when I set a « free » preset with no midi clock and tap tempo it seems that the tap tempo overrides the tempo for all presets ???

• 
  @TheGigRigDaniel11 күн бұрын

  Hi Michel, not sure what version of software you’re on but reach out to support, we’ll go through it with you and get you sorted asap 🤓🙏

• 
  @michel-yveskochmann151611 күн бұрын

  @@TheGigRigDanielthank you ! Already send the question to the support and waiting for an answer NB I have the last firmware

• 
  @michel-yveskochmann15164 күн бұрын

  @@TheGigRigDaniel Hi Daniel - I did not receive the answer yet - is it possible that you explain in detail the way you get that (seems so simple when you do it 😊 !)

• 
  @syzeewinde992615 күн бұрын

  in the manual there is an example with reverb en delay pedals. My question is....does the loops have spillover when you turn off a loop?

• 
  @TheGigRigDaniel11 күн бұрын

  Hi, you would need something like the WetterBox for that job as spillover requires a mixer 🤓👍

• 
  @JeffPershing17 күн бұрын

  Stevie Ray Vaughan owned a Dumble.

• 
  @cliftontorrence83917 күн бұрын

  Dan, mere words do not really convey the enormity of what you have accomplished for planet earth. Your gifts, your insights as what Could be, your dedication to creating clean sonic character and the required wisdom to follow the trail, & stay your course, you're a magic man.

• 
  @TheGigRigDaniel16 күн бұрын

  Ah mate, that is so kind. Made my day. Thanks so much 🤓🙏

• 
  @carminelombardi957517 күн бұрын

  Another amazing product solution.

• 
  @TheGigRigDaniel16 күн бұрын

  Thanks mate 🤓🙏

• 
  @mindfield983217 күн бұрын

  What if you guys made a smaller version where it use a stereo to two mono. So the stereo plug would be connected to the loop and then the two monos would be connected to the in and out of the pedal. It would cut down on the number of jacks on the loop pedal.

• 
  @123uzuz18 күн бұрын

  I knew a girl and her nickname was humdinger 😮

• 
  @Loopyllu36518 күн бұрын

  does this work if i had the midi driver for the g2?

• 
  @TheGigRigDaniel16 күн бұрын

  Hi Loopy. G2 had an entirely different program, the G3 web editor is only for G3. Cheers mate 🤓🙏

• 
  @Loopyllu36520 күн бұрын

  so if i plugged my guitar into a wha and then the wha into the input would that work just fine? so i would have constant acsess to use the wha on everything?

• 
  @TheGigRigDaniel16 күн бұрын

  Exactly this 👍

• 
  @benlaw263422 күн бұрын

  Can it do 18v ?

• 
  @TheGigRigDaniel21 күн бұрын

  Hi Ben, absolutely, simply run two outs in series, instructions on how to do this are in the manual. Cheers mate

• 
  @sgttallbear23 күн бұрын

  What is pedal board in this video @TheGigRigDaniel it looks amazing

• 
  @TheGigRigDaniel22 күн бұрын

  Cheers mate, it’s a Schmidt Array 🤓🙏

• 
  @frankswildyear23 күн бұрын

  👍👍👍

• 
  @robomalo24 күн бұрын

  Yo! Anyone know why there’s 2 sets of connectors on 13 and 14?

• 
  @TheGigRigDaniel24 күн бұрын

  Hi Rob, because those outputs are an amp each you can connect a couple of things such as a high current pedal and an isolator, or you can connect both 1 amp outputs in parallel 2 power a quad cortex etc

• 
  @robomalo24 күн бұрын

  @@TheGigRigDaniel Thank you good sir!

• 
  @billsmith516624 күн бұрын

  Woof. These guys know their stuff.. but of course. Marr would be a GREAT source of information. Will he be using the new amps with Radiohead? Whenever?

• 
  @TheGigRigDaniel24 күн бұрын

  Hi Bill, that’s the question, when? Would love a new Radiohead tour 🤓🙌

• 
  @billsmith516624 күн бұрын

  @@TheGigRigDaniel You were right there, did you tell him to hurry up? 😃

• 
  @jamesridener357325 күн бұрын

  I know this video is from antiquity, but could someone please confirm if I can us G3 for tap tempo on this pedal? I'm seeing mixed opinions on the AMAZE1 and would like to have another option. Thanks.

• 
  @TheGigRigDaniel24 күн бұрын

  Hi James, great question, the ARDX20 uses CV messages, so you would need a MIDI to CV interface

• 
  @jackprice782826 күн бұрын

  I’ve had Ed’s signature Fender now for 3 years and absolutely love it!

• 
  @TheGigRigDaniel26 күн бұрын

  Yep, me too, what a fantastic guitar 🙏

• 
  @carminelombardi957526 күн бұрын

  Living in Canada, where would I get customer support on the G3.

• 
  @TheGigRigDaniel26 күн бұрын

  Hi there, anything you need just get in touch - [email protected]

• 
  @maxs3nninАй бұрын

  The system seems very cool, I like EXT Kit + Floor Controller ! But where I can find the floor controller? I only find the full G3

• 
  @TheGigRigDanielАй бұрын

  Hi there. The EXT kit is bought to use with G3. It separates the audio from the floor controller. The audio stays in the rack and the floor controller on the floor. Cheers mate 🤓🙏

• 
  @fakestreamedia5309Ай бұрын

  How does this work if you have backing and the amp doesn’t have an effects loop? Do you have to reprogram your board ?

• 
  @TheGigRigDanielАй бұрын

  Hi there. If you’ve got the board set up to integrate into an amp with an fx loop and yiu end up with back line that has no effects loop, you can simply place a patch cable between the send and return of the loop your using for the amps pre amp. Hope that helps 🤓🙏

• 
  @the1khronohs40Ай бұрын

  Only improvement I can think of is trs jacks for every loop, so that each one can be run in stereo, thus you won’t have to make compromises if you need 12 loops! Otherwise this is just fantastic as is!

• 
  @TheGigRigDanielАй бұрын

  Thanks mate, the Atom has TRS for every loop 🤓👍

• 
  @KordTaylorАй бұрын

  Thanks. Another nice video.

• 
  @TheGigRigDaniel27 күн бұрын

  Thanks mate 🤓🙏

• 
  @armandoruggiero867Ай бұрын

  Who’s watching in 2024?

• 
  @nw379Ай бұрын

  Sold. Great explanation! Will be ordering one soon

• 
  @TheGigRigDanielАй бұрын

  Thanks so much 🤓🙏

• 
  @MrjononotbonoАй бұрын

  I have recently bought the TImeline, Mobius and Big Sky. I am dreaming of being able to control them with a GigRig G3. Later this year for sure!

• 
  @TheGigRigDanielАй бұрын

  Ah, thanks so much, I’ll keep one warm for you 🤓🙏

• 
  @mattg082Ай бұрын

  Hi Dan I sent in a warranty or product question 5 days ago, under Matt Gilson. I got mine in February, and I’m experiencing a weird issue suddenly. B side isolated output no sound no matter what. So flip flop mode only A works. In normal mode B side does work but only if A is enabled. If A is disabled everything goes mute. Wondering if you have any insight into this? Using the required power supply, tried a new one, tried different cables, isolated it and used it alone, plugged both amps direct to my Collider no issue or direct guitar. All B is in my dirty amp and nothing more. No matter what amp, cable, correct power supply this happens. I’m a bit stumped on this, and hoping to get it back up very soon. This is all running direct front to Amps, and simple setup I’ve been using with my Sky King and Ampeg VT40 months now with no issues till last Saturday. Thanks, Matt Gilson

• 
  @TheGigRigDanielАй бұрын

  Hi Matt, we’ll get to the bottom of it. We’ll be in touch and go through a vid in list with you. Cheers Matt 👍

• 
  @TheGigRigDanielАй бұрын

  Hi Matt, we just checked and haven’t received anything from you. Please email [email protected] 🤓🙏

• 
  @mikereilley5672Ай бұрын

  This may be a very dumb question, but if the extension board is at my feet, where does your guitar plug in? Is that what the two 1/4" inserts are next to the 7 pin DIN in the back?? I know nothing about 7 pin DIN, so not sure it it's possible for it to send a guitar signal. I'm guessing this how it's done, because it would seem strange to have a 50' 1/4" cable going back to the pedal board off-stage. Clarification here would be much appreciated. One other thing, can the extension kit only be used with the G3, or can it be used with the G3 Atom as well?

• 
  @TheGigRigDanielАй бұрын

  Hi. All audio is in the EXT kit so you would plug in back at the rack. Currently it can only be used with the full size G3 but we may do one for the Atom in future. 🤓🙏

• 
  @stevenkalata7119Ай бұрын

  Brilliant!!!! I love and appreciate Ed sharing how he creates such a beautiful soundscape!!!! You can hear the passion in everything he says!!!! Thank you

• 
  @sonig8361Ай бұрын

  How can I transfer my songlist from the editor to the G3? "download file" says: "file not loaded"

• 
  @TheGigRigDanielАй бұрын

  Hi there, please contact support and we’ll go through it with you 👍

• 
  @thisdyingsoul76Ай бұрын

  I bought a cheap loop switcher off ebay a few years ago and never looked back. Its nice to switch all pedals in a single button press.

• 
  @YupppiАй бұрын

  I don't know if I NEED it but I certainly do "need" it.

• 
  @paggreАй бұрын

  Great demo!

• 
  @TheGigRigDanielАй бұрын

  Cheers mate 🙏

• 
  @michael_caz_nycАй бұрын

  I love Dan ( and Mick ) - these 2 guys are Necessary

• 
  @manunoiseАй бұрын

  does anybody knows what are those 3 pedals on the top rail of the big board? Beside the microcosm

• 
  @gregorysmith5375Ай бұрын

  Hey Dan question: I do not play in a "preset/set list" format but I would still like a loop switcher to save "the tap dance". Is there switchers that just turns on/off individual pedals without having to bank them together?

• 
  @TheGigRigDanielАй бұрын

  Hi Gregory, check out our QuarterMaster range, each individual pedal goes in its own loop that you turn on/off via its footswitch. Hope that helps 🙏