That’s literally perfect! I need 8 loops and wanted to get the atom to save space. Now I’m definitely gonna get it. It’s soooo well thought out, it makes me really happy!

Awesome Tutorial Thanks a million.

I was going to do this, but I wasn’t sure. Gotta order another Doubler for an OCD anyway. Thanks for the tip!

@TheGigRigDaniel

2 жыл бұрын

You’re welcome Angus 👍

I put a remote loopy 2 into one of my other loops and did the same thing but your idea works better It truly is 2 extra loops I kind of wasted a loop ( or had to have that loop on in order to use rl2 Question I have a humdinger hooked to loop 1 to feed a separate bass rig through an octaver pedal (long story) I could use remote loopy’s 1st loop for my humdinger instead? As long as i have remote loopy before g2 like you do in this video right Dan?

Wow! This is just fantastic. I just ordered a G3 but could really use 2 extra loops. I was thinking of putting two drive pedals in the same loop on G3 but this will free it up! Here’s to hoping that the components come in so I can order, one or maybe two? 4 extra loops right??

@TheGigRigDaniel

2 жыл бұрын

They’re coming 🙏

me: how many loops? Dan: Yes.

Hi Dan, big fan of TPS and last night discovered you're the owner of TGR. Very excited about ordering one of your Christmas G3 packages but wanted to find something important out, if you have time to entertain my question: can I precede a 6-stereo-pedal-inputed G3 with a 5 (i.e., 2-2-1)-mono-pedal-inputed EH Tri-Parallel Mixer (which is itself preceded by several mono serial-chained pedals), or would you say the G3 and TPM would (for whatever reason) not "get along nicely" (as you and Mick put it) in the aforementioned scenario? (I would of course eventually need to incorporate in and out buffers, no problem). Crossing my fingers. Thanks!

Can you explain ...I think it's more than simplifying the tap dance. Is there a potential noise problem from two pedals in series in one loop?

Hi Daniel, you are amazing!!! thank you for your incredible contributions to the music world!.... Can you help me understand if the 1-Spot power adapter would be able to power up the G2 without a problem? I own one, so i figured why not see if it will work and save me time of purchasing a double current adapter cable to use with my Zuma. the power specifications on the 1-Spot power adapters are as follows: INPUT VOLTAGE: 100-240V AC, 50-60Hz... OUTPUT VOLTAG: 9V 1700 mA Sleeve: Positive, Tip/Center: Negative... i'm worried that my G2 is faulty and it's not the power adaptor... but hopefully this is more of a faulty worry of mine. please help

@skyluna_music

Жыл бұрын

it's the small 1-spot "slim" adapter... that i'm referring to, not the bigger version with multiple powering options... this one has one plug and one pedal hook up

@skyluna_music

Жыл бұрын

it's only a 2018 model, so it's fairly new

@TheGigRigDaniel

Жыл бұрын

Hi Alvaro, thanks for your kind words. Yes, that should be fine for G2 🙏

Wish these were in stock!

@TheGigRigDaniel

2 жыл бұрын

Trying, just waiting on components

Is it possible to add the loopy 2’s loops in between the G3’s loops, or is it limited to the front and end of your pedal chain?

@TheGigRigDaniel

Жыл бұрын

You can put RMT’s in G3 loops, in front, or after G3 👍

Hi Dan, very cheeky question - will remote loopy work with a Boss ES8?

Can you chain 2 or multiple G3? I couldn't find anything on your website nor in the manual :) Let's say having 1 G3 for pre pre-amp pedals, and the other for post pre-amp pedals? I mean, I realize I can just hook them up separately, but obviously I would want them to "extend" each other, so if I press preset 2 on one of them, it should go to preset 2 on the other one as well, so it's effectively "one" system, just in 2 different parts of the signal chain.

@TheGigRigDaniel

7 ай бұрын

Yes you can! We’ve even developed a special midi language for the units to talk to each other, works great 🤓🙏

I just had a thought, if you need more stereo loops, could you run two remote Loopy 2’s after g2/g3, for a stereo rig, and use one after the left g2 output and one after the right, basically adding an extra stereo loop. So for example, the tips would control the lefts and the Rings controlling the rights. U could even have say a stereo delay in loop 1 and a stereo reverb in loop 2 and have them set to a switch for stomp box mode perhaps. Lol you might have to offer the new “Stereo Remote Loopy” now

@marki7661

Жыл бұрын

Yeah I guess you would need all 4 remote switches to do this. RMT SW’s 1 and 3 could control the tip for the lefts and RMT SW’s 2 and 4 for the ring / rights. This kind of hurts my brain thinking about the paths without a pen and paper lol

Hi I have a question, i have purchased your G2 and see how adding the loopy 2 can add two more pedals, can the cinco cinco add 5 more pedals? if so can i access them within the G2 somehow like i would with the loopy 2?

@TheGigRigDaniel

Жыл бұрын

Hi Alvaro, you can add a Remote Loopy2 to the front of G2 and control it with G2’s remote switches. Cinco Cinco is a simple patch bay 🙏

would this work to control 2 pedals in the amp fx loop such as delay and tremolo? if so, would you recommend the buffer in this case?

@TheGigRigDaniel

17 күн бұрын

Hi, the new Remotest Loopy2 has a switchable buffer inside for exactly this 🙏

I wonder if Boss ES-8 could be used with Gigrig Remote Loopy 2 too? Or is there something that's not going to work... with either ES-8 or Remote Loopy 2?

Since I own one already, can I use an ML5 to add more loops to the G3? I’m getting an RJM Gizmo for my “small” MC8 rig so I will totally use the ML5 to add extra loops to my G3 if that works!

@TheGigRigDaniel

Жыл бұрын

Sure, just use the MIDI out of G3 to control the MC8. I would use the MC8 earlier in the chain, so you get the isolation from G3’s outputs 🤓👍

@kristenrocksfrags8584

Жыл бұрын

@@TheGigRigDaniel That will be awesome! I’ll be using an MC6 with the G3 to do a setup similar to Josh Smith’s new rig. So excited! The MC8 is my other rig that was supposed to be small, but it’s growing lol!

@ppierpont

11 ай бұрын

Wait a second @thegigrigdaniel the question was about using ML5 with G3, not MC6/8. I think that’s what you mean in your answer to have G3 control that switcher, right?

Does the Loopy 2 have a buffer? I think you can turn the buffer off or on for any loop you like on a G3 which is ideal for a Fuzz Factory, but with the loopy 2 at the start of the chain would that mean there’s now always a buffer ?

@TheGigRigDaniel

Жыл бұрын

Hi. No, there’s no buffer in the Remote Loopy2 👍

Does this work the same way on the Atom? I only ask because there are no "RMT Switches" on the front panel - is it accessible via the menu?

@TheGigRigDaniel

2 жыл бұрын

Yes mate, same remote switches but access is in the menu 👍

Is there any downside to doing this - tone wise? For example, is the input on G3 optimised to receive guitar rather than the Remote Loopy? I suspect not but just thought I’d check 🙂

@TheGigRigDaniel

2 жыл бұрын

Remote Loopy 2 uses relays to switch the signals , if no loops are selected the audio passes right through from input to output

@simonmccarthy1983

2 жыл бұрын

@@TheGigRigDaniel - you really do think of everything!

Hi Dan, I cant find the Remote Loopy2 anywhere on your website... What happened to it?

@TheGigRigDaniel

11 ай бұрын

We’re waiting on some components to arrive which should be next month, fingers crossed, been waiting a long time 😬

So, could you add 2 Remote Loopy2's to get 4 extra loops? It seems like you could...

@TheGigRigDaniel

2 жыл бұрын

Absolutely 🤓👍

I would like to see, the signal path, from guitar, into loopy 2 and so on. your video, is not self explanatory.

@MrApprobatur

2 жыл бұрын

Checkout the sketch at 0:45

@colincannings7946

2 жыл бұрын

@@MrApprobatur Yes, however this doesnt show the loopy 2 as part of the board configuration. When Dan shows the board, the loopy two is no where in sight.

@MrApprobatur

2 жыл бұрын

@@colincannings7946 I assume it's underneath the lid. And the stuff one wants on top is most likely the stuff one might want to change. Since the remote loopy 2 has no external functionality, it's more efficient to keep it from being in the way of something else.

@colincannings7946

2 жыл бұрын

@@MrApprobatur Yes, I am aware of this. However, becuse the video, was in regard to the loopy 2, I figure it should be in the picture.

@steveshuler1957

Жыл бұрын

Hi Dan. What size TRS cables do we need to get to the Loopy2? I know the G3 is a ¼” TRS but I don’t see what size is on the loopy2. Thanks