I've just got the 36v version best saw ever love using it every day.
@mgdubya272 ай бұрын
Turned out amazing. Thinking of doing the same thing. I'd like to dig down on the sawdust side and have a couple wheelbarrows flush with the concrete that I could just sweep the dust into. Then dump on the garden when full.
@liammulligan12793 ай бұрын
That looks like one he'll of a saw .health a wear .with it
@user-st7yp8vy6h3 ай бұрын
I just watched you share all of those measurements of the saw which no doubt were helpful to many. The one measurement I am looking for is from the back of the saw to the front face of the fence. I already have a miter station with fences to the left and right and am hoping to be able to keep them as is and drop the Makita in. The key measurement is face of the fence to the back, including clearance for vac hose.
@travishale12794 ай бұрын
Update on the Pioneer? Hows the cabin noise while cruising? Currently have an rmax 4 1000 amd we cant hold a conversation while riding.
@johnkidd20674 ай бұрын
It is still quiet. You can hava conversation. One complaint is the parking break differential lock adjustment is finiky. But other than that she is a solid ride.
@EssentialMountainHomesteading4 ай бұрын
Nice saw John! keep the videos coming.
@damionbrown91325 ай бұрын
Bro cut the video short and get to the point
@putra61067 ай бұрын
Unboxing start at 5:17
@bazajow7 ай бұрын
I got the 10 inch version but the plastic square was broken in three places so waiting for Makita to send me a replacement. Set it up just how it should be but blade is yet to be fitted but as soon as the square arrives it will be. Need to mitre kitchen wall cupboard pelmet pieces and get electrician to put light underneath. Job done. Good video clip as it is nice and slow to understand.
@Nickd778 Жыл бұрын
Can I ask… how did you connect the rockler dust hose? I have a new saw but if seems like I’m missing an adapter for that connection.
@alfredoalvarez2173 Жыл бұрын
Said hi John
@johnkidd2067 Жыл бұрын
Hi!
@KhoaNguyen-hw2tr Жыл бұрын
Truly one of the manatees moments of all times
@tuckrex2038 Жыл бұрын
This is the manatee ever
@grape7472 Жыл бұрын
Can confirm this is one of the manatees.
@mikemanjo2458 Жыл бұрын
❤
@davidhensley76 Жыл бұрын
I was wondering about your cabin in the woods just a few days ago.
@johnkidd2067 Жыл бұрын
David, life took me in a different direction for a while. I owe everyone an update!
@TheVineyardFarmhouse Жыл бұрын
Sweet!
@kk83y Жыл бұрын
What’s wrong with made in china?
@WV_Raised1983 Жыл бұрын
I know this is a 2 year old video but what where the dimensions of the foundation for this cabin?
@johnkidd2067 Жыл бұрын
I believe 10x16 with a 3' front porch.
@whatThaWho Жыл бұрын
Anyone know what the deck height on this is?
@dunrob13 Жыл бұрын
I have watched several videos looks like laser is always to the left, i think it was meant to show the part that would be left, how has the saw been holding up?
@johnkidd2067 Жыл бұрын
Its holding up well. But glad I have a 10' for portable work. And yes the Laser marks the side3 of the blade which it should. Middle of the blade wouldn't Accurate.
@abhinavavishnu6453 Жыл бұрын
Nice, how much Cost, where this machine available, need in india
@Dawei8815 Жыл бұрын
people say junk stuff from China, because you only buy cheap stuff made in China. Buy yourself some high end stuff made in China, you will change your mind.
Me vino muy bien éste vídeo. Justo estaba buscando una dual. La dewalt cuesta un poco mas. Siempre fui fanático de Makita. Entusiasma su forma de presentar las máquinas así que me convenció y compraré una. Aquí cuesta 650 dólares (dólar blue, el dólar de la calle). Gracias y un abrazo desde Argentina.
@tedsamuels3203 Жыл бұрын
That was awesome, I wish they would all show hills and trails like this ? Cause, I'm not always looking for speed, I'm looking for something to crawl up hills and not spin up hills 🤔 THIS video was very impressive 👌 👏 👍 THANKS FOR SHARING
@Northeast_Mainiac Жыл бұрын
Hi John, I wish they had this model on display at Home Depot but it wasn’t there. Was up in the air between the 10” vs the 12”, I ended up ordering the 12” inch today from homedepot and it will be shipped to my home from them, it was just over $800 out the door. My main reason for getting this saw is because of the rails and it can be put against the wall 2where the dewalt dw780 I had could not be. If it doesn’t work out it’s going back.
@martinmaluf2440 Жыл бұрын
Hi ! woul you help me decide between the makita or the dewalt 780 ? THANKS!!1
@johnkidd2067 Жыл бұрын
I would go with the Makita!
@martinmaluf2440 Жыл бұрын
@@johnkidd2067 THANKS!!
@TheVineyardFarmhouse Жыл бұрын
Your channel is good and you need to get back to doing videos
@johnkidd2067 Жыл бұрын
Thank you so much, that means alot! Your right!
@urgamecshk2 жыл бұрын
Just bought this and its missing the "grip" knob for the "turn base". It's part 21 in the manual. Can anyone send me dimensions of what it is so I can machine one, or tell me where to get a replacement in Canada? Thanks.
@danharris58732 жыл бұрын
What temperature does your gauge say when you're climbing Hills
@5598JC2 жыл бұрын
Hi John Love the video Can you tell me the Tooth count on that blade or the part number on the blade as I couldn’t see a close up of it
@paulgonzales18292 жыл бұрын
Does LS1219L a depth stop for making notches?
@Farli-Gaming2 жыл бұрын
hello thanks great video . please what is the distance from the front bench bolt hole to the back of the saw as i only have 65 cm bench
@josejoserodriguez64932 жыл бұрын
May you tell me where do get all the the kit please?? Like from what company?? Im building a door similar like yours. Also keep up on the good work! I enjoyed watching your videos
@pilgrimpits88722 жыл бұрын
looks like I'll be dunking all my saw logs in the harbor!
@issakh80432 жыл бұрын
Hello, i bought the saw yesterday, there is one issue though, the Guard Plate "part number 347308-4" is moving left to right and vice versa when pushed by hand, even if i push it from left to right it touches the blade below the teeth line, is that normal?
@michael.schuler2 жыл бұрын
Thanks for detailed review. I am considering this model for my jobsite finish carpentry work. I make storage/transport cases for my miter saws. Could you please add to the thorough set of measurements you provided: the minimum inside dimensions (LxWxH) that a case would need in order to fit the saw with head locked in the down position and miter angle set to whatever angle makes the overall footprint the smallest? (I currently run Dewalt DW706 non-slider, and its optimum transport miter angle is its max., 50 deg. But with this slider and its exceptionally wide miter angle capacity, I suspect that the optimum angle to minimize transport footprint might be less than the max. available.) Thanks.
@pryme20132 жыл бұрын
Hi, where is this saw made? Makita is Japanese so I’m hoping it’s not made in China.
@jamesrussell68702 жыл бұрын
You opted to work on a concrete floor instead of a dirt & sawdust floor? Oh my aching legs!! & You can't be in snow country, or the first time that polished floor sees snow & you step on it, you're going for a ride!
@garyneely85932 жыл бұрын
Thanks for your videos. I have learned some things and I have enjoyed your sense of humor. I’m glad you are so busy and I hope you find time to show us what you are up to.
@johnkidd20672 жыл бұрын
Gary, Thanks so much. That means a lot to me! I do need to do an update video. So much has changed around here. When lumber prices shot up my little sawmill side business took off! So that videos had to take a back seat. But I will shoot an update video soon. Thanks again!!!
@MegaBzzzzzzzzzzzzzzz2 жыл бұрын
Great video I have same saw I have problem when cutting 45° Right 45 is perfect But left 45 when I put 2 pieces together doesnt close 90 straight Where can be problem?
@williamwayand2372 жыл бұрын
Great video. I'm in the mist of getting the Pioneer 1000 5 Deluxe myself. They asked if I wanted side mirrors, I said no because of trail riding. I didn't know about the rearview/dome light. Or the extension for the bed. I'll have to look into those. Thanks
@AN-kg4ei2 жыл бұрын
What's the weight of the door and max load for the track/rail??
@f1s2hg32 жыл бұрын
Hi John Kidd, my builder was named M. Kidd
@DZAntiSioniste2 жыл бұрын
osmo yes great work
@mattrichter33062 жыл бұрын
What brand is the roof?
@johnkidd20672 жыл бұрын
Honda brand
@shantelleadeline60532 жыл бұрын
Make it wooden with the help of the Woodglut instructions.
@davec.31982 жыл бұрын
Very cool. Its nice to see that bed extender since I'm considering one of these for a family trip out west. Family is 5 and i was wondering where to put the cooler. Looks like a great machine.
@pjohnsonj2 жыл бұрын
Hi John, thanks for the video. I'm assuming you still have the saw. I am wondering what the dimension from the back of the saw to the front of the fence is? Thanks in advance.
@kevinb61022 жыл бұрын
Sweet
@richardbrown51832 жыл бұрын
What size trailer you need for the pioneer 1000-5?
Пікірлер
I've just got the 36v version best saw ever love using it every day.
Turned out amazing. Thinking of doing the same thing. I'd like to dig down on the sawdust side and have a couple wheelbarrows flush with the concrete that I could just sweep the dust into. Then dump on the garden when full.
That looks like one he'll of a saw .health a wear .with it
I just watched you share all of those measurements of the saw which no doubt were helpful to many. The one measurement I am looking for is from the back of the saw to the front face of the fence. I already have a miter station with fences to the left and right and am hoping to be able to keep them as is and drop the Makita in. The key measurement is face of the fence to the back, including clearance for vac hose.
Update on the Pioneer? Hows the cabin noise while cruising? Currently have an rmax 4 1000 amd we cant hold a conversation while riding.
It is still quiet. You can hava conversation. One complaint is the parking break differential lock adjustment is finiky. But other than that she is a solid ride.
Nice saw John! keep the videos coming.
Bro cut the video short and get to the point
Unboxing start at 5:17
I got the 10 inch version but the plastic square was broken in three places so waiting for Makita to send me a replacement. Set it up just how it should be but blade is yet to be fitted but as soon as the square arrives it will be. Need to mitre kitchen wall cupboard pelmet pieces and get electrician to put light underneath. Job done. Good video clip as it is nice and slow to understand.
Can I ask… how did you connect the rockler dust hose? I have a new saw but if seems like I’m missing an adapter for that connection.
Said hi John
Hi!
Truly one of the manatees moments of all times
This is the manatee ever
Can confirm this is one of the manatees.
❤
I was wondering about your cabin in the woods just a few days ago.
David, life took me in a different direction for a while. I owe everyone an update!
Sweet!
What’s wrong with made in china?
I know this is a 2 year old video but what where the dimensions of the foundation for this cabin?
I believe 10x16 with a 3' front porch.
Anyone know what the deck height on this is?
I have watched several videos looks like laser is always to the left, i think it was meant to show the part that would be left, how has the saw been holding up?
Its holding up well. But glad I have a 10' for portable work. And yes the Laser marks the side3 of the blade which it should. Middle of the blade wouldn't Accurate.
Nice, how much Cost, where this machine available, need in india
people say junk stuff from China, because you only buy cheap stuff made in China. Buy yourself some high end stuff made in China, you will change your mind.
Felicitaciones desdeArgentina.. hermoso taller.. 👏👏👏👏
Me vino muy bien éste vídeo. Justo estaba buscando una dual. La dewalt cuesta un poco mas. Siempre fui fanático de Makita. Entusiasma su forma de presentar las máquinas así que me convenció y compraré una. Aquí cuesta 650 dólares (dólar blue, el dólar de la calle). Gracias y un abrazo desde Argentina.
That was awesome, I wish they would all show hills and trails like this ? Cause, I'm not always looking for speed, I'm looking for something to crawl up hills and not spin up hills 🤔 THIS video was very impressive 👌 👏 👍 THANKS FOR SHARING
Hi John, I wish they had this model on display at Home Depot but it wasn’t there. Was up in the air between the 10” vs the 12”, I ended up ordering the 12” inch today from homedepot and it will be shipped to my home from them, it was just over $800 out the door. My main reason for getting this saw is because of the rails and it can be put against the wall 2where the dewalt dw780 I had could not be. If it doesn’t work out it’s going back.
Hi ! woul you help me decide between the makita or the dewalt 780 ? THANKS!!1
I would go with the Makita!
@@johnkidd2067 THANKS!!
Your channel is good and you need to get back to doing videos
Thank you so much, that means alot! Your right!
Just bought this and its missing the "grip" knob for the "turn base". It's part 21 in the manual. Can anyone send me dimensions of what it is so I can machine one, or tell me where to get a replacement in Canada? Thanks.
What temperature does your gauge say when you're climbing Hills
Hi John Love the video Can you tell me the Tooth count on that blade or the part number on the blade as I couldn’t see a close up of it
Does LS1219L a depth stop for making notches?
hello thanks great video . please what is the distance from the front bench bolt hole to the back of the saw as i only have 65 cm bench
May you tell me where do get all the the kit please?? Like from what company?? Im building a door similar like yours. Also keep up on the good work! I enjoyed watching your videos
looks like I'll be dunking all my saw logs in the harbor!
Hello, i bought the saw yesterday, there is one issue though, the Guard Plate "part number 347308-4" is moving left to right and vice versa when pushed by hand, even if i push it from left to right it touches the blade below the teeth line, is that normal?
Thanks for detailed review. I am considering this model for my jobsite finish carpentry work. I make storage/transport cases for my miter saws. Could you please add to the thorough set of measurements you provided: the minimum inside dimensions (LxWxH) that a case would need in order to fit the saw with head locked in the down position and miter angle set to whatever angle makes the overall footprint the smallest? (I currently run Dewalt DW706 non-slider, and its optimum transport miter angle is its max., 50 deg. But with this slider and its exceptionally wide miter angle capacity, I suspect that the optimum angle to minimize transport footprint might be less than the max. available.) Thanks.
Hi, where is this saw made? Makita is Japanese so I’m hoping it’s not made in China.
You opted to work on a concrete floor instead of a dirt & sawdust floor? Oh my aching legs!! & You can't be in snow country, or the first time that polished floor sees snow & you step on it, you're going for a ride!
Thanks for your videos. I have learned some things and I have enjoyed your sense of humor. I’m glad you are so busy and I hope you find time to show us what you are up to.
Gary, Thanks so much. That means a lot to me! I do need to do an update video. So much has changed around here. When lumber prices shot up my little sawmill side business took off! So that videos had to take a back seat. But I will shoot an update video soon. Thanks again!!!
Great video I have same saw I have problem when cutting 45° Right 45 is perfect But left 45 when I put 2 pieces together doesnt close 90 straight Where can be problem?
Great video. I'm in the mist of getting the Pioneer 1000 5 Deluxe myself. They asked if I wanted side mirrors, I said no because of trail riding. I didn't know about the rearview/dome light. Or the extension for the bed. I'll have to look into those. Thanks
What's the weight of the door and max load for the track/rail??
Hi John Kidd, my builder was named M. Kidd
osmo yes great work
What brand is the roof?
Honda brand
Make it wooden with the help of the Woodglut instructions.
Very cool. Its nice to see that bed extender since I'm considering one of these for a family trip out west. Family is 5 and i was wondering where to put the cooler. Looks like a great machine.
Hi John, thanks for the video. I'm assuming you still have the saw. I am wondering what the dimension from the back of the saw to the front of the fence is? Thanks in advance.
Sweet
What size trailer you need for the pioneer 1000-5?