Пікірлер

• 
  @juniormartinez1334Ай бұрын

  So did you the rd1 subframe or the eg subframe

• 
  @longislandvntg28342 ай бұрын

  This was entertaining and informative🤣

• 
  @jdmnuggets2 ай бұрын

  Lol glad you enjoyed it

• 
  @johnnguyen-xt9nd3 ай бұрын

  What is the name of this relay?

• 
  @ohxietviet3 ай бұрын

  Why 2 grounds on the trans? I feel like one of those should have gone from the timing cover to the body.

• 
  @carlorec960003 ай бұрын

  For the crv k swap you need ek set of mounts right?

• 
  @brandonhoud424 ай бұрын

  Hey man do you have to remove the motor to do this? Or can you just lower the sub frame? Looking to add this pump to my 06 crv K24a1.

• 
  @jdmnuggets4 ай бұрын

  Id assume so.

• 
  @argiesrctoyreview67354 ай бұрын

  Why don’t you switch calipers from left to right to the bleeder faces up is there clearance issues?

• 
  @SandunLabs4 ай бұрын

  She is awesome :) , Car and the girl

• 
  @motorfiendz4 ай бұрын

  Great vid mate. It's good to see some non US CRV content from a fellow Kiwi. I'm currently working on a CRV rescue myself.

• 
  @jdmnuggets4 ай бұрын

  Cheers dude, i also have a kswap crv build series if you're interested. Na1 build nsx out soon followed by a turbo b20 crv build

• 
  @chriswatts85674 ай бұрын

  Silly question, does the E-Brake need brake fluid to activate braking? I have the Accord lines but there seem to be some play because they will not activate. Help.

• 
  @shivermetimbers90414 ай бұрын

  G'day, I've got an EG awd k24 swap, just got the hasport awd mount and similar back and forth experience trying to get those bolts exposed. But now it's all in place I noticed the bolt heads sit against the steering rack, they'll rub on it for sure. Did yours do the same? Send it?

• 
  @robertojuarez97852 ай бұрын

  Quick question. I have a EK stock subframe with K20 hasports, im on the process of buying all parts to convert AWD, already have trany but wasent sure if i needed a new back mount, so hasport sells a AWD trany mount with bracket? Or i can use same mount but i need new bracket? Thanks in advance

• 
  @TOCHIKN4 ай бұрын

  炊飯器？！

• 
  @jdmnuggets4 ай бұрын

  Lol 😂

• 
  @samuelgallardo85265 ай бұрын

  Does he let some gas out at the 6 minute mark?

• 
  @jdmnuggets5 ай бұрын

  Gas?

• 
  @boxer9515 ай бұрын

  I would've went with wrinkle blue for the valve cover. Kinda likenthe euro r H22 engine.

• 
  @B16A5_EK46 ай бұрын

  *Finally, a honest KZreadr that shows that stuff actually breaks* 😅

• 
  @cameronno37406 ай бұрын

  I found a 100 yen coin same spot you found the 10c coin must be a good spot to lose ya loose change

• 
  @jdmnuggets6 ай бұрын

  Lol nice one, got 100yen rebate on the V 😏🤣

• 
  @jonmulhollem48647 ай бұрын

  How did you get Kpro to turn your fans on and off once your value was entered for it to kick on? I have the stock k series switch as well installed in the rad and my engine temp is registering 35°F and I set the value to 30 (car is in aux only, not running), uploaded to the ECU, and fans don't come on. I even checked current to the switch and it's reading what the battery is so I'm getting the signal and sensor is brand new. Fans are wired into the stock plugs like you did. Any thoughts?

• 
  @jawdropper77757 ай бұрын

  Automatic is different

• 
  @user-br1oo7io1c7 ай бұрын

  Salundo me gustaria porde comprarlo para hacerlo en mi vehiculos .tengo una crv 2000

• 
  @farahnomi8 ай бұрын

  Can you send me a pdf link for my RHD UK spec mk 1 Honda CRV workshop manual please..like you did for the mk1 honda accord.great videos .. appreciate your hard work

• 
  @jdmnuggets8 ай бұрын

  Dm me on ig

• 
  @arneydooscar21979 ай бұрын

  Top 🎉🎉🎉

• 
  @darbymcbride419 ай бұрын

  Wish we got the sunroof options here in America. I see some rare unicorns time to time with moonroofs in the conventional "above driver and passenger" slot but NEVER one over the passengers. That's WILD

• 
  @charisekirk36099 ай бұрын

  i like the drum brakes system even though ihate the set up. they actually stick much better than discs brakes.. though the disc pads look much nicer, they wear much faster than drum brake shoes.

• 
  @Loyal_Honda_Fan9 ай бұрын

  Hey my guy, i am really confused with the 50° cam gear, which camshafts are you using? The stock K24A3?

• 
  @jacobg652810 ай бұрын

  That's one clean crv

• 
  @tewaewae10 ай бұрын

  Hey man, your dad would be incredibly proud of this channel. No plans for a diesel Merc conversion in the future?

• 
  @jorgereyes444310 ай бұрын

  Try putting the right side caliper on the left said and the left caliper on the right side. So the bleeder screw isn’t facing down. But other than that the install seemed clean and easy.

• 
  @nobodynoone250010 ай бұрын

  It hits the trailing arm that way, gotta grind the caliper if ya do that. There is a video on YT about how to do it.

• 
  @eazyantrax21310 ай бұрын

  I need jdm parts 😢

• 
  @eazyantrax21310 ай бұрын

  Any crv parts for sale 😮 wing 🪽

• 
  @hersonvalle11 ай бұрын

  Based on how your car is moving now, makes me believe my AWD is broken

• 
  @louissilva418011 ай бұрын

  No, once you know the relay works. You go get the right one and put it in

• 
  @kkkevv22411 ай бұрын

  did the rear disc brake and big brakes up front. got good brake pedal when car is off but goes to floor when cars on. if i press the brake twice while moving it locks the brakes up. any tips?

• 
  @jimmyalizanoa825211 ай бұрын

  Excelent brake change !!! Verry good ! Clean simpli thanks for share vídeo .

• 
  @rachmatnuriadisaputro918511 ай бұрын

  Nice & very helpfull to upgared my CRV. Do you have any sugestion parts beside using a honda prelude's parts? Becouse its a rare item here in Indonesia.

• 
  @anthonyalbanis11 ай бұрын

  These are extras and not necessary right?

• 
  @anthonyalbanis11 ай бұрын

  Do i need to worry about grounding those extra wires on a manaul crv?

• 
  @deepblue442 Жыл бұрын

  Whats the hp after all this part changed?

• 
  @jdmnuggets Жыл бұрын

  Depends on supporting mods, eg intake and exhuast size, but typically you're looking at around 210 to 230 wheel hp

• 
  @-_----- Жыл бұрын

  Brilliant.

• 
  @rupamulina6788 Жыл бұрын

  Any updates ?

• 
  @jdmnuggets Жыл бұрын

  Yeah, just started filming on the turbo b20 build. Thanks for asking

• 
  @lfuego68 Жыл бұрын

  I need the part numbers or mount kit number for me to mount an k24 w/automatic trans. Also which ecu and harness did you use?

• 
  @DRB13kurupt Жыл бұрын

  Does he sell parts man? Im in NZ too. After some parts.

• 
  @xinxinmason3283 Жыл бұрын

  Nice , What the product used to seal the leak for the back boot?

• 
  @jayonefive234 Жыл бұрын

  do you kno how to remove that back mirror convex or whatever

• 
  @Crt5 Жыл бұрын

  Think this would work with an auto trans?

• 
  @Kiret123 Жыл бұрын

  what car is that shifter assembly out of?

• 
  @khimsophacarfixing Жыл бұрын

  Thanks for your sharing knowledge 👍

• 
  @DRB13kurupt Жыл бұрын

  Where did you buy this shock/spring setup bro? In NZ too.

• 
  @jdmnuggets Жыл бұрын

  If you check the description there are part numbers and a link to the nz website for springs. The shocks are from rockauto in the states. Search the part numbers i provided

• 
  @miguelalvarado8414 Жыл бұрын

  for the rear rotors you used 1996 prelude rotors on rock auto i see they are 4 lug

• 
  @jdmnuggets Жыл бұрын

  No i used 5 lug. My crv is converted to 5x114.3. Normally a 96 rd1 would be 4x114.3

• 
  @lionelanderson2368 Жыл бұрын

  How do you take that rear video footage?

• 
  @jdmnuggets Жыл бұрын

  Suction cup mount on the back window with an extension and a insta 360 camera(comes with extension mount pole thing). U can probably see the suction mount on the window in the video.

• 
  @lionelanderson2368 Жыл бұрын

  @@jdmnuggets Thanks for your reply!

• 
  @WiserAsIGrow Жыл бұрын

  over a year went by and you never told anyone the eg subframe does not fit and you infact need a dc2 rack to complete the install. cheers.