k swap custom exhaust crv first drive

Автокөліктер мен көлік құралдары

Today we build a kswap custom exhaust for the rd1 jdm crv and take it on its first drive
big thanks to Chris for welding up this system for me, we used mild steal and a mig welder.
thank you for the support, if you would like to help me out visit my site for merch etc. LEGENDS!
jdmnuggets.com/
3” down pipe 2.5” back with one resonator and a twin loop muffler
2.5”
1m straight pipe
a flexi
25
35
45 degree pipes
u bend
3”
u bend
3” to 2.5” reducer
Im building this car for my wife I cant wait to see her reaction.
Follow the link for Honda crv workshop manual - drive.google.com/file/d/1xk4k...
most parts purchased through speed science make sure to give them a visit and a follow
www.speedscience.co.nz/?gclid...
Hopefully these videos are helpful to some? If they are do me a favour, like, subscribe, share etc it's FREE and it really helps me.. appreciate it.
make sure to follow me on IG for regular updates Instagram.
/ jdm_nuggets
website with merch coming soon !

Пікірлер: 45

  • @williamsantiago7303
    @williamsantiago7303 Жыл бұрын

    Man, I hear that thing all the way over here in Jacksonville Florida in the United States. That thing sounds awesome Bubba!!

  • @alexs5969
    @alexs59692 жыл бұрын

    Only just found all your videos man so sick would love an RD1 daily, she sounds like my DC5 with its 2.7 Inch Skunk2 catback man absolutely mental on wide open throttle but you get used to it after a while

  • @jdmnuggets

    @jdmnuggets

    2 жыл бұрын

    Yeah it makes for a really good all round vehicle, with the standard b20 it was a bit under powered. Thanks for watching, cheers

  • @sirlapis9998
    @sirlapis99982 жыл бұрын

    Awesome man! Congrats on the maiden voyage! A swaybar is an absolute must! Also for the rattles, the main places on mine are the door grab bars, glove box and rearview mirror. Some strategically placed foam tape should help!

  • @jdmnuggets

    @jdmnuggets

    2 жыл бұрын

    Lol cheers dude the interior is for sure rattling 😂

  • @edwardcphipps
    @edwardcphipps2 жыл бұрын

    Cool as bro !! 😎

  • @jdmnuggets

    @jdmnuggets

    2 жыл бұрын

    Thanks 😁🍻

  • @mostwantedmali4677
    @mostwantedmali46772 жыл бұрын

    Let's faking send it... 😁 lol glad to see it on the road. Been watching this build for a while. Came out great. your engine mounts might break in after a while. Mine where so bad when I first installed them. I went 1320 75a. After about 2 months it doesn't shake as bad. Either that or I just got usto it. Either way keep the videos coming. 💪

  • @jdmnuggets

    @jdmnuggets

    2 жыл бұрын

    Hahah cheers mate, here's hoping they ease up over time ae. Lots more to come, almost at 1000 subs 😲 so thanks for your support

  • @sewkingwet
    @sewkingwet2 жыл бұрын

    you'll get used to it, lol. I have an rd1 with the 1320 UEL full exhaust it sounds amazing, I love it. Loud but a great boggle (like a subaru) nice deep tone, swapped a b18c in it and it is fun. Winter is here, can't wait to drift!

  • @jdmnuggets

    @jdmnuggets

    2 жыл бұрын

    Ahaha nice one mate, yeah with the jdm k24a3 its similar to my old s2000. The stock skinny tyres no alignment and no front sway bar isn't helping 😂😂

  • @Jason-nk4yr
    @Jason-nk4yr2 жыл бұрын

    Looking good, does sound a bit load. But still, so awesome to see running. Keep the content coming

  • @Jason-nk4yr

    @Jason-nk4yr

    2 жыл бұрын

    Loud not load

  • @jdmnuggets

    @jdmnuggets

    2 жыл бұрын

    Lol yeah 🤷‍♂️ will be installing a wide band in the next couple days, hopefully get some road tunning done at some point

  • @matthewbell5162
    @matthewbell51622 жыл бұрын

    Stoked to see you driving and know you built an Animal! I'm excited to start my build next month and will be watching all your videos again multiple times! Great work! I am curious if you have an LSD in there cause I am debating adding that in to the transmission I have.

  • @jdmnuggets

    @jdmnuggets

    2 жыл бұрын

    Thanks mate!! Yeah im sure i checked and it wasn't LSD ( had a bar running through the front diff), but it is acting like it is 🤷‍♂️ maybe its the skinny tyres vs the torque lol

  • @matthewbell5162

    @matthewbell5162

    2 жыл бұрын

    @@jdmnuggets I guess that is what happens when you put in a motor that is almost twice as strong as the original. I can't wait to see it with the AWD hooked up and see how you need to adjust the driveshaft, if at all.

  • @jdmnuggets

    @jdmnuggets

    2 жыл бұрын

    Lol yeah!! Need to shorten the prop shaft, i think its 3/4 of an inch. Still need to measure it

  • @Blazinwithenny
    @Blazinwithenny Жыл бұрын

    Where is that roof top window replacement u know where I can get one

  • @yroftheogre
    @yroftheogre Жыл бұрын

    That vibration is from your exhaust being to close and maybe engine mounts but the noise I hear was exhaust rattle

  • @teamaxlestands
    @teamaxlestands2 жыл бұрын

    haha wow big progress! I reckon pulling would be alignment, mine was only slightly out and was doing something similar. Also same deal with mine... single muffler and its so loud. I need to work out how to quieten it down. Going to be sick when you get the rear wheels driving too - its going to hook up great!

  • @jdmnuggets

    @jdmnuggets

    2 жыл бұрын

    Yeah i think your right, i need to fit the sway bar anyways. Its actually ok at part throttle but wakes up at wide open throttle, which is what the twin loop is ment to do.

  • @teamaxlestands

    @teamaxlestands

    2 жыл бұрын

    @@jdmnuggets oh one more question, are you running 62a mounts?

  • @jdmnuggets

    @jdmnuggets

    2 жыл бұрын

    @@teamaxlestands uhhhhh cant remember will look it up, i think they are in the middle somewhere 🤷‍♂️

  • @johnfrancisguevara4973
    @johnfrancisguevara49732 жыл бұрын

    It's still a 4wd/awd set up? We're happy for your build 🚗

  • @jdmnuggets

    @jdmnuggets

    2 жыл бұрын

    Yeah, i just need to install the prop shaft. Thanks 😁

  • @teamaxlestands
    @teamaxlestands2 жыл бұрын

    haha "give it the f*ckn jandal" - does it get any more kiwi? 😂

  • @jdmnuggets

    @jdmnuggets

    2 жыл бұрын

    Lol !! I guess not 😂

  • @Jason-nk4yr

    @Jason-nk4yr

    2 жыл бұрын

    @@jdmnuggets what is a jandal? And more kiwi?

  • @jdmnuggets

    @jdmnuggets

    2 жыл бұрын

    @@Jason-nk4yr a jandal is a flip flop in other countries, apparently it comes from the term Japanese sandle 🤷‍♂️

  • @teamaxlestands

    @teamaxlestands

    2 жыл бұрын

    haha and only in New Zealand (kiwi). Our name for flip flops confuses the Americans even more!

  • @jdmnuggets

    @jdmnuggets

    2 жыл бұрын

    Lol you guys are cooked af tho, thongs 😂😂😂 chilli bin is an eski? What else. Smokes are darts?

  • @eazyantrax213
    @eazyantrax21311 ай бұрын

    Any crv parts for sale 😮 wing 🪽

  • @sewkingwet
    @sewkingwet2 жыл бұрын

    also bro this is only FWD? gotta go AWD man and upgrade to a 08-11 crv or element diff, makes a world of difference.

  • @jdmnuggets

    @jdmnuggets

    2 жыл бұрын

    You should watch my other videos on the build 🙂. It has a jdm 2004 crv awd manual k series gearbox and rear differential. Jdm cl9 accord k24a3. Same as the tsx k24a2 but the jdm variant has slightly better cams. I still need to shorten the prop shaft to put it into awd. Also it will be tuned in fwd. Thanks for watching 😁🍻

  • @AC_Apollo
    @AC_Apollo2 жыл бұрын

    Check your mounts, that rattle might be from the exhaust rattling around and vibrating on shit

  • @jdmnuggets

    @jdmnuggets

    2 жыл бұрын

    There is plenty of space around the exhuast, i had to remove the tow bar to fit the muffler. Will need to clearance the tow bar bracket to get it to fit. It might have been the bolts from that lol

  • @AC_Apollo

    @AC_Apollo

    2 жыл бұрын

    @@jdmnuggets make sure you check your torque mounts, your whole exhaust could be getting thrown around under there

  • @AC_Apollo

    @AC_Apollo

    2 жыл бұрын

    If you have bad engine mounts or torque mounts then your whole exhaust, pipe and everything, would be moving around down there front to back and back to front not side to side.

  • @jdmnuggets

    @jdmnuggets

    2 жыл бұрын

    Nothing is moving hence the extreme vibrations from the engine rattling the dash lol but thanks

  • @dual_brothers9579
    @dual_brothers9579 Жыл бұрын

    1 buck and 1 sock for the car. Take it or leave it🤷‍♂️

  • @TNSAOD
    @TNSAOD2 жыл бұрын

    Builds the car for the mrs . . . . . actually you know what she is going to hate this she can have the next one.

  • @jdmnuggets

    @jdmnuggets

    2 жыл бұрын

    Hahahahah she is for sure concerned after seeing the video 😂🤷‍♂️

  • @TNSAOD

    @TNSAOD

    2 жыл бұрын

    @@jdmnuggets Its ok babe, when its done it will light up all 4 wheels instead.

  • @jdmnuggets

    @jdmnuggets

    2 жыл бұрын

    Ahahah nek minute churbo

Келесі