I can not bring myself to pay someone to do something I am capable of doing myself. On this channel, I have videos of a variety of different projects that I attempt to tackle myself, with product reviews sprinkled in between. I do not want to pay someone when ICanDoItMyself.
Пікірлер
Let us know how the side gate journey goes. Feeding it has been my biggest challenge too.
🫡
I have the same rifle, and love it. I have had no issues with it with about 1000 rds threw it. You need to smooth off the load-gate with a file, for better and safer insertion. I had a gunsmith do that for me. kzread.info/dash/bejne/e5qeybuPmKu5mKQ.html.
Im at about 2500 rds, give or take through my rdb.. still runs fine.
cool vid. can you order a bunch of $300 couches? I'm gettin ready to buy one and would love to hear one of your amazing videos about them.
Hey thanks for the info- Whats your Barrel and Twist?
🔥🥷
Sbr without the sb
I have the 16 inch one coming, I'm hoping for something better lol. I've watched every video I can find and although I have seen a lot of failure to eject your issue is probably the worst I've seen they did end up changing the gas regulator on the newer rifles. I'm hoping they've worked out some of the problems , I guess I'll find out. It looks like to me you have a barrel problem it may be a problem for Ruger to take care of. It's supposed to be a softer shooter so that's telling me that there's something seriously off on your rifle. I hope you've worked it out I have high hopes for this rifle.
@ronnieboardman1673 I haven't taken care of it yet. My plan was to put ~300 rds through it to see if it would break in. But that's a lot of 308 just to break it in. If I send it to Ruger, I know they'll take care of it. Sorry for an update delay. Hasn't been high on the list of priorities.
I just broke mine today. Bought a aluminum replacement to get my truck running tomorrow but will get this one for next oil change
Why are you idiots wearing captions bars? Trying to impress all the foreign students??? Scare .e academy? If I saw that I'd walk away...GA aviation going in the toilet,a d your helping it right along
I think you have the best jawline ive ever seen, also good video
Not ancriticism - to each their own but why did you choose a brake over say....a linear comp?
@@GregA-qr2tj nothing more than, because I had it. Really, I'd prefer to put a suppressor on it. But, money.
That turned out great. If I first know any better I would have thought your were a pro
Just ordered one, going to spiff it up too. Yours looks 👍 good
Ok. Can I jack up the entire back with the little jack that the Tacoma comes with? Or is that only for one side at a time for changing a tire?
@Fletchman1313 you probably could, wouldn't be easy, and I wouldn't recommend it. But yes, you could.
I'm all in favor of pointing out deficiencies and areas that NEED improvement like the way the spare mags come out by pushing the button on the opposite side or the slide release button being unusable, but your rant about the space filler on the mag doesn't make sense to me. It's loose... but not when the mag is in the gun. Maybe someday they'll come out with a gun that'll take that mag and you'll have to remove that rubber thing to be able to use it. I don't know... but it doesn't cause any problem that I can see. if it's that much of an issue you can put a little silicon caulk or glue where you want the rubber to stay, and it'll stay there for a long time. The spare mag release mechanism needs to be redesigned and the slide release button needs to be slightly extended... Those are actual issues that you didn't even mention. The rubber filler on the mag is nothing at all.
The higher sights as well
I ordered the front trim for my titan but it didn’t come with the clips. Where did you get the bag of new clips from sir? And thanks!
@@vincentking8833 the trim we ordered came with the clips.
I believe the lean is because the gas tank is on the left side of the vehicle. Full tank more lean.
If you look sportsman's Warehouse up online it says they're a scam. They ship on time for me
Thanks!
What tire pressure do run?
@@SmokinZen 50, stiffer ride but better mileage.
0:31 - Don't worry, we're poor too. To be honest, I'm more surprised you have leftover RU steel case! Cheers for the straightforward, down to earth, everyman content. Even your rancor, are ones we share.
I live in cali AV and mojave side and the temps always run pretty hot aswell for the cooling around 205 and up during the day. Goes to 190 at night.
Never goes over 213 and the needle always stays in the middle
Just a tad late for this but in drive?... sure as you know what those temps will be high... just came back from a 7k mile trip towing a trailer that is literally a parachute. Temps at 65-70 mph were at 186°. A 8k foot elevation gain, temps ONLY increased 13°. Ambient temps throughout the entire trip were 70° to 100°. Anyone that claims they need an aux trans cooler is insane for these 3rd gens. The driver is the reason behind those temps. Mechanical sympathy plays a large role in temps. Again, 7k miles towing a literal parachute of a trailer. These transmissions are extremely efficient and don't need much more of a cooling solution then oem unless you live in a desert climate. Having any vehicle in drive when towing and allowing the transmission to constantly shift is not mechanical sympathy.
Thanks for the videos, man. All of 'em. I recently found two Hexmag gen 1 10/30s I bought when I lived in CA. Converted 'em with help from Brownells but never used 'em. Now they're ready and I'm gonna go test 'em right now. Thanks for the inspiration
I like that your videos are all over the place. 😄
@@AverageJoe4063 I'm glad someone does! 😆
My lil brother just sold me his for $600 haha deal of a lifetime 🤩
@smiledoge4968 WOW! Ya it was!
Get a rattler
@@zombiesmeal I got the 9 inch MCX upper and love it! Should've started there. But the Rattler is going to be one of my next purchases.
Female here and no instructions on how the glove box cover comes off every video just jumps right to removing the blower. ????
Didn't I show how to remove the glove box? Combination of screws and clips.
@@ICanDoItMyself You showed the door off in the beginning then again after removing the inside of the box and the clip after but I couldn't get just the door off. Luckily I was able to get to the filter with one side of the door off I tried everything to release the left side without any luck. the blower was accessed from underneath. The video shows the whole box removed and how to put the door back on. At least that's what I was able to tell from the video. I was frustrated because every video instructions for the filter and blower started after the door was already removed. 🤷♀️ I have fixed it though, thank you for responding. 🤗
New to the channel and just purchased this firearm. Love your content and format. Thanks for what you are doing!
Perfect
User error
We are adding two PW3 to our Enphase PV system. Can't wait to become an "island". We are 72 and want the safety and security of being energy-independent. As a bonus our electric bill is ZERO and we bank excess power to use in the future when our solar underproduces. We didn't do it for that reason.
So basically you don’t know anything about it yet
That is the first time I've seen that in action. That is bad a**, thank you for the video.
I have a Holosun dot, a light and laser combo, a tank muzzle break and a folding vertical grip also bought a 36 Rd mag to go with the two 23s.
I’m really thinking it’s personal preference based on what your doing. Garand Thumb did a barrel length video and was ringing steel at ranges with barrels that I did not think could do it.
Perfect. I knew when u went straight from saying jacking points to actually showing it, I picked the right video. Thank you!
It is fully ambi once you switch. Geesh dude, just swap it, but great job on both handles.
Were the inlet/outlet lines to the factory trans cooler marked? I’ve heard they have a red and blue marking. If not did you simple detach them to establish inlet/outlet
@danielryan9993 If I remember correctly, the line goes from transmission to radiator to factory trans cooler to aftermarket cooler back to transmission.
Thanks but I’m asking if they were marked as to which line was sending fluid from the transmission vs which was returning fluid to the transmission.
@danielryan9993 no, the lines are not marked. It may be marked on the side of the transmission but because I have a cat shield I can't verify. Then, it would be a matter of following the lines of they are marked. But sorry, I don't remember if the inlet/outlet is marked there either.
Big fan of the Midwest Industries mount. I like it back closer to my eye too and don't mind the little paaracord.
No, the joint that holds the moving fan to the wall motor keeps letting the moving fan drop down. The turning knob will not make it stay up at the correct angle. It is an Igenix brand.
Nice aquarium ✅ ❓... What are your thoughts on glueing the mag collars ??
@andrewderksen3342 might work. Haven't tried it though.
@@ICanDoItMyself just picked one up last night I am Also confused why s&w didn't atlest make it fit better lol
I run sl-m on every single ar no shits given what barrel length!
Thanks for the heads up on the RDB! But dumping the entire brand and making a video about it over one gun after saying ALL THE OTHERS YOU OWNED WERE PERFECT feels like a rage quit. You wanted your money back and Kel-Tec said no so REEEEEEEEE!!!
@@ChuckCoy I requested a refund OR that they replace it with a different model in their line. Something Sig did for this gentleman. kzread.info/dash/bejne/eHae0Zhrpra_is4.htmlsi=NWnxlbI-JAQUeSDy
@@ICanDoItMyself You wanted another model but couldn't get one so you sold the good ones you had. Makes sense.
@@ChuckCoy the companies customer service soured my opinion of them. And at the end of the day, I can do whatever I want no matter how much you don't like it or disagree with it. Part 2: kzread.info/dash/bejne/gpmOlaiCeqbdf9I.htmlsi=0Kbqi4_OvzVxk2jy
@@ICanDoItMyself Of course you can. But when you put your source grapes on you tube you can expect feedback you don't like. Just like you, we can do what we want. It works both ways.
What are the names of the repair fittings that you used.
Links are in the description.
The end is killing me lol
"I ran to the bank and back..." with an extended mag hahaha I love it 👍 thanks for the tutorial about to attempt myself