Пікірлер

• 
  @lipis_ty906012 сағат бұрын

  How can I get this one

• 
  @Thompson9277 күн бұрын

  The wiring is my issue i wish that would have been included.. still cant figure mine out

• 
  @Manifest_success_with_meАй бұрын

  Great 👍.. I am new here.. from India

• 
  @lucyschaefer2144Ай бұрын

  Sorry I can't hear you because of the background music

• 
  @JayRays1truckАй бұрын

  I apologize. I’m still learning how to make the videos better.

• 
  @JayRays1truck2 ай бұрын

  No, I apologize. I ended up ordering the wrong top and it doesn’t fit right. I also moved to a different state, and have not ordered the correct top yet.

• 
  @GodzProfet2 ай бұрын

  Did u post the vid yet? Can u remove canvas from the frame and put new one?

• 
  @JayRays1truckАй бұрын

  I have not posted the video yet as I ordered the wrong top. Yes, you can remove the canvas from the frame and install a new one.

• 
  @mistyray73532 ай бұрын

  ❤

• 
  @IsaacGarcia-cz1es2 ай бұрын

  Can you please make a video showing how you weird the old wires to the new radio

• 
  @brodyshankowsky17602 ай бұрын

  How did you mount the center console with the seats using the same mont hole?

• 
  @JayRays1truck2 ай бұрын

  My truck did not have switches and I did not add heated seats

• 
  @howardcilley33732 ай бұрын

  how did you wire up the switches for the heated seats was the wiring there all ready

• 
  @JayRays1truck2 ай бұрын

  I did not have heated seats in my truck. The new seats did not have heaters in them either. I would have to figure out that wiring.

• 
  @howardcilley33732 ай бұрын

  @@JayRays1truck I mean did your truck have the on off switches all ready or did you have to wire switches in

• 
  @godspeed21452 ай бұрын

  Do you remember what size socket you used for the blower fan? Is it 5/16 too?

• 
  @JayRays1truck2 ай бұрын

  Unfortunately I don’t remember and I sold the RV. I want to say yes, but I really don’t remember

• 
  @mistyray73533 ай бұрын

  You are awesome

• 
  @JayRays1truck3 ай бұрын

  Thanks, but I’m not as awesome as you are.

• 
  @richardbates23673 ай бұрын

  Jensen xa series built in power ground and remote wires i had a very dependable xa1000 200watt silver color amplifier like your amp. In a 78 Chevy c20 custom cab trim farm truck i had...

• 
  @JayRays1truck3 ай бұрын

  Sounds like it was a good system

• 
  @richardbates23673 ай бұрын

  Hmm i have a premium infinity by Chrysler am fm CD player cassette tape player stereo and it works great but I got it used it is identical to what the truck would have came from the factory with the stereo is from a seller on eBay and it was fully serviced it has been internally cleaned and all solder joints checked out for bad spots and cracks, and the belts are both replaced used contact cleaner on all the knobs and slides, and all new led lights and was fully tested, and that includes testing it in his jeep zj. Anyway i also have bought one of these c and a auto radios mine came from AliExpress it was the cheapest one available.... it's a single din mp3 player 5188c i believe it is the part or model number....

• 
  @JayRays1truck3 ай бұрын

  @richardbates2367 Hmmm. I made this video to show what I did to my truck. I hope it helps someone who is thinking about doing the same thing to theirs. If you like the radio you have, which it appears that you do, I’m happy for you. I wanted bluetooth and Apple Car Play in my truck, and this was one of the least expensive radios I found to accomplish that. Thank you for watching and commenting!

• 
  @richardbates23673 ай бұрын

  Hmm neat well I hope it is very helpful for most and I am not anyway but my truck is not a gen 3 ram but a late gen 2 magnum V8 gas truck

• 
  @chrislauber3 ай бұрын

  My man thank you! There really should be better instructions in the car about hitting the “learn” button on the garage door after programming the car. You made my day way easier! Thanks again.

• 
  @JayRays1truck3 ай бұрын

  Glad I was able to help!

• 
  @austin.taylor17193 ай бұрын

  How did you get your back up camera wired up?

• 
  @JayRays1truck3 ай бұрын

  I had to get an additional RCA cable for the video with an RCA to RCA adapter to connect the 2 cables. Then I also had to add wire for the positive (red) 12 Volt from the radio. I tied the signal for the reverse input to the back up lights.

• 
  @dyranross73933 ай бұрын

  Man you got to be in north texas

• 
  @JayRays1truck3 ай бұрын

  The Taco Casa I stopped at was in Eastland

• 
  @TheLandorock3 ай бұрын

  I might have missed it, but why did you need to re-do some of the existing wires?

• 
  @JayRays1truck3 ай бұрын

  I was able to get the connectors for the new seats so I didn’t re-do any wires, but I had to wire in the new seat to the existing wiring. The wire colors are a bit different so this is what my video was about.

• 
  @drfluffballs-52435 ай бұрын

  What single dim mount plate did you get?

• 
  @JayRays1truck5 ай бұрын

  I actually just got the single din mounting plate from Walmart. It worked pretty well

• 
  @DrivingCultured_TV5 ай бұрын

  Does your door opener button work as well as the car after you do this

• 
  @JayRays1truck5 ай бұрын

  Yes. I have 2 buttons in the garage, 2 hand held openers, and the car button all work

• 
  @DrivingCultured_TV5 ай бұрын

  @@JayRays1truck oh good. Thanks

• 
  @ACT-co4nk6 ай бұрын

  how is the radio standing up .. does it lag? hows the sound ect ? would you buy it again or get something else ?

• 
  @JayRays1truck6 ай бұрын

  The radio is doing well. It is okay at doing 1 thing at a time. You have to let it fully boot up before connecting your cable to your phone for using car play. The sound quality is good, but I also added a DSP in my truck so I have more control over the sound. I have the EQ on the radio flat since I am using the DSP. I would buy it again for the price, but when I get the money, I will probably upgrade to a nicer unit. I am looking at a Pioneer but it is around $1,500.

• 
  @GIJeaux16 ай бұрын

  What's in the bag? I sure hope that it's a tripod.

• 
  @Droobie4204 ай бұрын

  Burn

• 
  @johnmcardle59676 ай бұрын

  Damn dude you need to replace that belt....

• 
  @JayRays1truck6 ай бұрын

  Why?

• 
  @stoneyaragon48826 ай бұрын

  What did you remove to make space. And was there a washer on the engine side of that pulley or is it just the spacer.

• 
  @JayRays1truck6 ай бұрын

  The fan shroud is missing in my truck as well as the belt driven fan. I am using only electric fans on my truck. I did not see any washer behind the pulley that I remember

• 
  @vaughnodonnell6097 ай бұрын

  🌈 'promo sm'

• 
  @youdandee17 ай бұрын

  I just did my idler and tensioner pulley on my 2006 Dodge Cummins 5.9 304,000 miles .tacos look great too haha

• 
  @JayRays1truck7 ай бұрын

  Nice. Thanks, I love Taco Casa’s tacos.

• 
  @kookiedabear7 ай бұрын

  🤣 You bought the marketing pitch, hook line and sinker. All these do is show how old the driver mentally is. The truck comes with four rubber grounding pads from the factory; they are called tires. If you have a static problem, its not the vehicle, it's your clothing, which can't be resolving with auto bolt-ons.

• 
  @JayRays1truck7 ай бұрын

  Actually, the four rubber pads you speak of are meant to isolate your vehicle from ground and make your ride smoother. But perhaps I’m wrong. We shall see. For $6 it’s worth a try.

• 
  @kookiedabear7 ай бұрын

  @@JayRays1truck Think of it this way, you don't die when your vehicle is struck by lightening for a reason. Best wishes on your research adventure.

• 
  @JayRays1truck7 ай бұрын

  @@kookiedabearThat proves that tires are an insulator

• 
  @JayRays1truck7 ай бұрын

  @@kookiedabearI’m not sure if this will do good or bad for my truck, but for $6 I’m going to find out. I don’t enjoy getting shocked when I get out of a vehicle so if this works I’m good. If it doesn’t help, I may remove it later. Who knows?

• 
  @kookiedabear7 ай бұрын

  @@JayRays1truck The rubber strip will not help with the shock events. If you care to watch, this is a good source (and not too long-winded) describing the science and a real/free solution - kzread.info/dash/bejne/Zodkp6SxhJmWoNo.html

• 
  @TheCharleseye7 ай бұрын

  There are normally two screws in the grab handle area in a car/truck door (unless it's one with the grab strap). If you're touching one of the screws as you get out, you don't get shocked. Actually, if you're touching pretty much any metal surface as you get out, you're fine but the screws in the grab handle are conveniently located.

• 
  @JayRays1truck7 ай бұрын

  It has been my experience that most newer vehicles have those screws covered by a piece of plastic. Even my 2003 Ram has them covered and the whole grab handle is plastic. The Chevy work truck I’m currently in has plastic grab handles. The Ford work truck I used to drive was also the same.

• 
  @TheCharleseye7 ай бұрын

  @@JayRays1truck pulling a small piece of plastic out of an unseen area seems like an easier fix than attaching a grounding strap to the bottom of a vehicle. Hell, most people lose or break the covers the first time they take their door apart, anyway. That's how I happened to stumble upon this "fix" for getting zapped.

• 
  @JayRays1truck7 ай бұрын

  @@TheCharleseyeperhaps, but the bolts are well over an inch down inside that plastic on my truck. I had to use a small extension and socket to reach the bolts and my fingers are too large to fit in the holes that the bolts are in.

• 
  @johnpyle24807 ай бұрын

  We have those on man lifts so you don't get shocked everytime you touch the building steal.

• 
  @JayRays1truck7 ай бұрын

  I hope they are working well for you

• 
  @Pinkielover7 ай бұрын

  to do an idler pulley on my car I need to jack up the car remove the front right wheel and go from underneath the pulley is literally 2 inches from the frame of the car... the bolt is near impossible to get to.. fun

• 
  @JayRays1truck7 ай бұрын

  That is part of why I love my Diesel truck.

• 
  @motardedbikes60627 ай бұрын

  Do you have a link for that radio

• 
  @JayRays1truck7 ай бұрын

  I looked. I was not able to get the link to copy for some reason. There are several options on Amazon if you type in Rimoody 9 inch radio. It looks like this particular one has gone up to $89 from when I purchased it back in June at $72. They have some others that start at $63 which say Apple car play and Android auto.

• 
  @klaus56868 ай бұрын

  Taco Casa! I love me some bean burritos with mild sauce. Thanks for the video! Mine was to the point that the bearing was overheating and tossing metal shavings around lol.

• 
  @JayRays1truck8 ай бұрын

  Right on! Glad you were able to fix it!

• 
  @user-mb7wd6bl6q8 ай бұрын

  Hows the rp and timing on yours? I run the same but rp is 1. Timing and torque 2. Ramps up too 20 no problem. Afraid to bump the rp more

• 
  @JayRays1truck8 ай бұрын

  I currently have my rail pressure at 2. Timing is at 3, and I am at Power level 5. What is ramping up to 20? Boost pressure? Do you mean 20K rail pressure? I have seen 36 psi boost and 29K rail pressure in my truck with no issues. If increasing pressure and adding timing, take note of how responsive your truck is and how much(if any) smoke comes out the tail pipe. If it starts to be more than a puff of black smoke when you hit the skinny pedal, you can back off on the rail pressure a little bit to clear it up.

• 
  @JayRays1truck8 ай бұрын

  Also, I have ran my truck tuned at power level 9 with RP at 3 and Torque at 3 before. Only issue is it blows black smoke quite a bit even without a load on my truck. If you do that, make sure you pay attention to your transmission temperature

• 
  @kennethgordon44068 ай бұрын

  Why when I hooked my up it said no free Ecm flash programming license & it was brand new

• 
  @JayRays1truck8 ай бұрын

  You may have to contact MADS Smarty.

• 
  @kennethgordon44068 ай бұрын

  @@JayRays1truck I did

• 
  @lupesanchez93218 ай бұрын

  There's nothing like the comments when it's healthy beautiful sound😅

• 
  @Gakerch8 ай бұрын

  DId you find the place you bought the motor from? THank you.

• 
  @JayRays1truck8 ай бұрын

  I bought it from amazon. I’ll try to find the link.

• 
  @stoliplayhouse9 ай бұрын

  Great how to! I want to do that but and I have the same unit and cover, But I can't seem to get to the screws underneath the vents on the sides to remove the cover. , Is there a trick to that?

• 
  @JayRays1truck9 ай бұрын

  Are you referring to the ones under the filters? You have to pop those off.

• 
  @mistyray73539 ай бұрын

  The cat meowing is cracking me up

• 
  @thetravelingmyfundsarelow16939 ай бұрын

  They look awesome! I have the morimoto xb on my 06 , now go get the fog lights with the drl in them…she’ll be a show truck in no time! 😅 good day Jay…enjoy sir you earn them , 👍🏻🇺🇸

• 
  @JayRays1truck9 ай бұрын

  Thank you! I agree. Fog lights will happen at some point. I have received the tail lights now so that video will be released soon. I have a bit of editing to do still.

• 
  @cody366729 ай бұрын

  hey jay! your the reason i bought a smarty touch with a comm mod. Congrats on the new job btw. But i have a quick question! ive looked everywhere and cant find an answer. I know what the PID tuning RT tuning does but what does the "Switch" option actually do?

• 
  @JayRays1truck9 ай бұрын

  Are you talking about the SW 1 through SW 9 settings?

• 
  @Gump239 ай бұрын

  Can you get the plug or do you have to reuse the one that is there ?

• 
  @JayRays1truck9 ай бұрын

  I reused the one that was there. You may be able to find a new one, but I didn’t look for one.

• 
  @Ethan_LeBlanc9 ай бұрын

  Where can I get the connectors

• 
  @JayRays1truck9 ай бұрын

  I got my seats at a junk yard and got the connectors with them out of the truck the seats came out of. Also, the connector for my truck came off my old seat

• 
  @brentkoester51179 ай бұрын

  Good morning Jay

• 
  @JayRays1truck9 ай бұрын

  Good morning Brent

• 
  @jcel587010 ай бұрын

  Great explanation and video thx

• 
  @JayRays1truck10 ай бұрын

  Thanks! I appreciate you watching my video!

• 
  @jdejesussandoval480410 ай бұрын

  Is a great video 📹

• 
  @JayRays1truck10 ай бұрын

  Thank you! I appreciate you taking the time to watch and comment.

• 
  @jdejesussandoval480410 ай бұрын

  I need a motor to but the same thing I can't find it in Amazon whith the model number, my model number is just like yours, F48AF70A61

• 
  @Gakerch8 ай бұрын

  Did you find a replacement motor? The one I find is a 3315332.05 but it's 1/5 hp. I do not see anywhere that Jay Ray mentioned what motor he bought.

• 
  @nathanclark577110 ай бұрын

  Can you tell me which model Dometic this is? Thank you in advance.

• 
  @JayRays1truck10 ай бұрын

  I don’t remember to be honest. I sold the RV a few months ago. The RV was a Forest River Wildcat 32 foot fifth wheel. Not sure if that helps.

• 
  @chadhosmer935710 ай бұрын

  Glad it's working for you Jay. Thank you for making this video brother.