Пікірлер

• 
  @chubbethsthunder2 күн бұрын

  Awesome looking rifle. Thank you very much. Hope to get one. Have a beautiful and blessed week.

• 
  @Bloo09698 күн бұрын

  It is not calvary, it is cavalry. Calvary is the hill Jesus was executed on.

• 
  @denisdegamon822410 күн бұрын

  Try using a tighter weave cotton or linen patch material of .015" thickness. Swab out the bore after a couple of shots. Akso plug the vent hole while loading will speed up ignition. Whipe off the frizen abd especially the flint to remove burnt powder fouling, whoch inhibits the spark and knap the flint edge to get better sparks. I have been shooting these rock crushers for over 45 years and participate in living history rendezvous for over 38 years.

• 
  @jamesflowers714217 күн бұрын

  What a fantastic company to fit those ivory grips for you!!!

• 
  @thereality70019 күн бұрын

  That's a beauty!

• 
  @steveg832221 күн бұрын

  Exquisite piece.A friend of mine gave me a T/C Hawken in flintlock some thirty years ago,was saving for a Lyman,but dang,if it were a woman I’d marry it.Doesn’t care what you feed it,easy to clean,goes off without a hitch,a bit of patience goes a long way with flintlock arms,absolutely deadly at the range.Tight groups,friend.

• 
  @dickgoesinya941929 күн бұрын

  The grips on the Standard Manufacturing gun are beautiful! The factory Uberti grips with the red stain applied have about as much character as a cardboard box. You have made them look so much better. The fit on your grips on the engraved gun is still done poorly in my opinion, but if you are happy that's all that matter.

• 
  @ericshindler5829Ай бұрын

  I really do wish double barrel shotgun were still made in the USA. It’s extremely hard to find any new production of this I have had and I’ve been very disappointed. Is this made in the same factory of Stoker or is it a step above?

• 
  @mikerussell6212Ай бұрын

  They need to add a one third measure with this kit

• 
  @clangerbasherАй бұрын

  Good video. It would have been good to see how easily the hulls fall out of the barrels. Seeing your left ear and shoulder doesn't show us much.

• 
  @daveyjoweaver6282Ай бұрын

  10 hours well spent! It looks great and Kind Thanks! DaveyJO in Pennsylvania

• 
  @richardpfortmiller4225Ай бұрын

  Magna tusk is mastodon ivory, which is what I was told by a knife maker friend 20 years ago. Apparently, that is not ileagle or bull ? It was looking to see a video on installing 2 piece grips from Arizona grips as well . I wish I had bought the one piece. Thanks for the video

• 
  @dickgoesinya941929 күн бұрын

  I can tell you the magna tusk is not Mastodon Ivory. A set of raw mastodon blanks would cost about a grand these days, and would cost a few hundred to have a grip maker fit them to your gun. Those Magna grips are some colored resin that was just given that name because it was a simulation of the real thing.

• 
  @ricktaylor57442 ай бұрын

  Thank you beautiful guns

• 
  @ricktaylor57442 ай бұрын

  Thank you

• 
  @KeiPyn242 ай бұрын

  Frizzen spring is light. Try tightening the Frizzen screw to slow or quicken the frizzen timing.

• 
  @BertieW0oster2 ай бұрын

  The original specimen of this revolver was stamped on the right side of the grip, so that's actually more authentic. The older Ainsworth was done on the left. Yet another win for Uberti.

• 
  @morriszachrisson83592 ай бұрын

  6:36 I like the one above more than the one below, because the one above doesn´t have that extra screw infront of the cylinder. But the case hardening is nicer with the one below. Like with everything else --- you can´t get everything in your life. Something must be wrong.

• 
  @dougcolby34112 ай бұрын

  I have watched as many SAA videos as I can find. Received my Std. Mfg. Co. 5.5 inch a month ago and will be getting the 7.5 inch in -10 days. Dig that it’s American made and quality is 2nd to none. 4.5 inch will finish my collection. Cleaning it compared to shooting is 10x.

• 
  @isaaco56792 ай бұрын

  When I was first learning how to fire my gpr i found that it was best to have half a pan of powder and kept to the outside of the pan. The powder doesn't obstruct the flash hole, and i would get virtually no hang fire.

• 
  @HDBujutsu17752 ай бұрын

  Pronounced “Showfield”. Love mine, have Ivory grips

• 
  @tommymorgan9926Ай бұрын

  You must have learned to pronounce that in “shool”.

• 
  @HDBujutsu1775Ай бұрын

  @@tommymorgan9926 nope, I had brains enough to look it up and study about it…. Try it sometime…

• 
  @cemalkaya59612 ай бұрын

  Hımm super , great a pistol l wanting that it pistol👍😇

• 
  @SoCalFJ3 ай бұрын

  You need an adapter that has a nut surface outside of the fixed slide shroud so you can have the fixed slide shroud on and still tighten it down. What you have hides the bolt down notch under the shroud so you can't tighten it down beyond hand tight. The adapter does exist.

• 
  @homegrownluv81063 ай бұрын

  Luv the part where u installed it.

• 
  @raulmorales99673 ай бұрын

  Looks like a Colt but it’s not a Colt.

• 
  @wink.96423 ай бұрын

  Western union don’t you mean the Wells Fargo no 3.

• 
  @terrytilson92013 ай бұрын

  I have the cimorron frontier SAA 45C with a 7.5 inch barrel and it had a 2 1/2 lb trigger pull right out of the box and it has the 4 clicks also and it is Lazer engraving too. I love it.

• 
  @aurteekay63393 ай бұрын

  It’s a lot easier if you just mix all the powders and alcohol together in a dropper bottle or an essential oil type bottle with a dropper in it and use that to dispense the solution into the caps and just let it dry that way

• 
  @mtiger53 ай бұрын

  I just inherited one of these from my uncle and am thinking about whether or not i should get the barrel threaded for my 22 suppressor

• 
  @kirkstewart-vf6hg3 ай бұрын

  Beautiful pistol I have 2 colt bisleys 3 ist Gen single actions . Sure would like a standard in 7 1/2 inch barrel also.

• 
  @RooftopKY3 ай бұрын

  I'd love a 1st gen black powder frame, but I'll probably never be able to afford one that's in good shape. My only real gripe with my Colt (being a 3rd gen) is the cylinder bushing isn't a bushing. Minor complaint, but it's not as originally designed. Edit. I misread the title I was responding to. I have a 3rd gen Colt SAA as well. My mistake. This gun is made as originally designed, and honestly the Standard is a better gun hands down.

• 
  @tamaran19794 ай бұрын

  I made this as a comment on a post but I felt like everybody should know it. Chisos boot insert that is the best you can get for a boot. To elaborate quality of boots primarily you can determine this sole and if it has a shank but that's really hard to find out unless you contact them so in the next lesser aspect for quality is the boot learning. If it's pigskin synthetic or full leather lined and the reinforcements around the toes if it's a cheap composite plastic and you also need a good heel counter as well. If you want the diversify yourself in the knowledge of quality they look up Rose Anvil on KZread will be my best suggestion. I will say this tacovas and Chisos are the two top brands for bang for buck. Chisos are better they are equal to boots above 1,000 or better Tacovas are almost most as equal but just a tad less if I was going to recommend any boot it would be these two over any brand. Do your due diligence in watch videos on KZread from rose anvil and you will be educated and diversified within the knowledge of quality my friends. Neil to talk about the pair of boots in the video the stitching on the top behind the toe it's called the vamp to me the stitching is too far down or not minimalized for my liking but it might be to suit multiple wear aspects. Anybody that understands the quality good quality with leather sole shoes or boots should always get a sole saver for them.

• 
  @HDSME4 ай бұрын

  Can you time regular guns byeing aligning them tighter or is that actually designed into them ? Nice vedio

• 
  @sanman187-4 ай бұрын

  Suggestion: hole the punched caps with a small board that has shallows hold drilled in it. Then use a small brass (won't spark) spoon, they make tiny ones, to apply the powder. Or a pointed plastic spatula. Or perhaps a better idea...!

• 
  @johnnottahcal57254 ай бұрын

  Flint needs to be very solid. no movement. Don’t be fooled by the rumors. Those flintlocks from India are for shooting. Learn all you can about flint to frizzen tuning. 👍

• 
  @stevenmcinnis81054 ай бұрын

  I believe all deluxe have gold trigger and safety. Lots were faked because stocks were around to buy back then.

• 
  @RooftopKY4 ай бұрын

  Possibly. Not really sure on the history of this one. It was my dad's, but he never really told me anything about it. There's not a lot out there on these guns that I've found to research either.

• 
  @stevenmcinnis81054 ай бұрын

  @RooftopKY I own advertising brochures from the day, that Winchester published. It's a great way to see what came with and what could be ordered back then.

• 
  @ericpratch97604 ай бұрын

  Do you need to clean them after every time, using black powder? From what I've heard that stuff is nasty to be left sitting in your barrel for too long.

• 
  @blackhawk655894 ай бұрын

  yeah it can rust stuff quickly. You should be cleaning your guns after you shoot them anyways ;)

• 
  @RooftopKY4 ай бұрын

  I do. Black powder is highly corrosive and it's gross. It's part of it though. Upside is it doesn't take a lot of expensive solvents to clean it off. Just some good old fashioned water, scrub, thoroughly dry them, and some ballistol afterwards, and you're good to go.

• 
  @szasstam51314 ай бұрын

  Yeeeehaw that’s a right darn shootin son.

• 
  @richlopez42034 ай бұрын

  You got an incredible price for it

• 
  @user-gt1ir5yv6l4 ай бұрын

  Thanks for posting, I bought this and tried it and it worked great, The second time i tried there improved Prime-all 2.0 and it didn't work at all, guess I will go back to the original Prime-all. Tried calling and emailing sharp shooter several times over issue, They wont return my call

• 
  @sapago41664 ай бұрын

  CCI Standard Velocity should be quieter than that. Were you using a different ammo and calling it "standard velocity"?

• 
  @Indarow4 ай бұрын

  A shame Smith and Wesson were too stubborn to allow the #3 to be chambered in .45 colt. If they had we’d probably all be talking about the Schofield as the gun that won the west rather than the SAA.

• 
  @garydavis18455 ай бұрын

  19:20 Colt name is not the only difference.History is also important.Also,with a Colt,you're also getting a collector's item.

• 
  @rudyzaleta37165 ай бұрын

  Thanks nicely done I have the same flintlock except with a left handed lock Zeroed it for 75 yds using 90 grains of 2 ff with primed with 4ffff & prelubed patches Its a tack driver Please show us your target hits next time All the best

• 
  @robertwhitaker38585 ай бұрын

  I don’t see my favorite grip configuration, the birds head grip.

• 
  @ajm28725 ай бұрын

  Approximately 1 primer per minute, 60 primers per hour, 10 cents per primer at current market price yields you an equivalent value for your time at $6 per hour. Not great. Buy factory primers and stack them deep.

• 
  @bernardconeghen5 ай бұрын

  S&W thought they had it made coming up with the schofield 45 round they thought they were going to outfit the whole army only problem was the army only needed 3000 guns when incombatability was realized the got rid of the guns

• 
  @mikehoward82015 ай бұрын

  I often buy used single shot shotguns at pawnshops. I have this gun in an 18.5 inch barrel, 20 gauge, that I got for $110, right after Covid started up. I disassembled it, cleaned it, and camo painted it, added a 5 shell sleeve on the stock, an improved front sight, and a black padded butt pad. I really like it. It is hanging from mt 3 long gun rack in my man cave, along with a Marlin Model 60 .22 rim fire, and a Henry Golden Boy lever action .22 rim fire. Everyone who has seen it, wants to know how I camo-painted it! Definitely a keeper!

• 
  @deniseandmarkfirestine74435 ай бұрын

  Are those emmus

• 
  @RooftopKY5 ай бұрын

  Yes they are! We raise them.

• 
  @TwoStageTrigger5 ай бұрын

  Anyone know if they'll feed in an in line capper?

• 
  @GovtWatchdog5 ай бұрын

  This is so ridiculous. It’s 2024, not 1854. How in the world can we have a shortage of black powder percussion caps?? 🤦🏼‍♂️

• 
  @daniellong21006 ай бұрын

  Love my 2 in k6 s. But gonna get the target. Great trigger and ideal weight