I'm glad there's people right now making videos like this.

I've been using this for the past year and it works well. As long as the primer compound is in the cap it works. Carrying the caps loose knocks the compound out so I make only what I'm going to use and pack them in Styrofoam for the trip to the range.

@davidfine9323

Жыл бұрын

Use 5 drops of new skin to 25 drops acetone and the primer want fall out

@improvisedsurvival5967

11 ай бұрын

Was thinking if you sanded the aluminum sheet smooth before punching the caps the primer compound would stick better.

@alexacosta2140

4 ай бұрын

I’ve had this issue as well, I’ve been looking for an extra ingredient to add to the mix to prevent this

Just ordered 1000 CCI no. 11's from a supplier. They are pricey. Hazmat, shipping, etc. But if you search you can find 'em. Great demo. Looks like fun.

@CommonManTools

Жыл бұрын

who did you use please?

I started doubling my can before I make the caps and they work a lot better on the pistol

Good to know the cutter can still be had. I have an olde Forster Tap-O-Cap. Probably punched out about 12,000 at least. I use a paper roll cap inserted in the cup and stumbled upon a nipple primer of all things. Dumps about 1 grain of powder in the nipple and with the assembled cap I've had very good success. Will have to check out your video on the Prime-All. Thanks for sharing this.

@RooftopKY

3 жыл бұрын

I didn't know they made a nipple primer. Never even heard of one. That would make this a much easier endeavor. When you watch part 2, you'll see what I mean. I wonder where I could find such a device, antique?

@brentscott5359

3 жыл бұрын

@@RooftopKYNipple primer is at TotW. A pan primer works too but doesn't sit on the nipple very well and dumps a bit too much powder. Also, a standard paper punch is a bit big. Another tuber uses a star punch from Michael's craft store. A smaller hollow punch would knock out the paper caps as well. A bit of work but I refuse to 10 cents for a percussion cap.

@RooftopKY

3 жыл бұрын

I appreciate the heads up. Thank you, I'll check them out.

Hence the Left Handed Poor Boy .50 flintlock sitting behind me.

They also just came out with a die set for #10 caps.

@RooftopKY

3 жыл бұрын

That's awesome!

Would you say they are as good as factory ones like CCI or Remington? Do they go off most of the time?

I have a quick question why painted side down I just made a bunch with painted side up

If you use a scotch brite and scuff both sides do not finger prints then run across on open flame to aneal

Newb question, can a 12 gauge muzzloader blackpowder that takes 209 primers use primers popped out of a 00 buckshot shell? And vice versa?

@RooftopKY

2 жыл бұрын

Yes. Any 209 primer will work on a muzzle loader as long as that's what it uses.

@sethmullins8346

2 жыл бұрын

They can but that would be really expensive to buy ammo just to pull primers from

👍👍💥💥

I wonder if these caps will fit in a straight-line capper?

@josephcraig765

6 ай бұрын

In my experience they won’t they are definitely more crudely cut but hey better than not having any

Thanks for the video... I ordered a Pietta 44cal and then found out I can't buy percussion caps anywhere! I also ordered Slix-Shot nipples. I was wondering if I should get the #11 or the new #10 cap making tool. It looks like the #11 fits pretty good. Has anyone tried the #10 homemade cap on a Slix-Shot nipple? Thanks again for your video!

@cadywelp235

2 жыл бұрын

Same, I bought 2 piettas only to find out I cant use them at the moment

@James1Wayman

2 жыл бұрын

@@cadywelp235 I ordered the #11 cap maker and the prime all primer mix. Only took about 3 days before they shipped, I should get it tomorrow. Lots of good info in the Blackpowder section on The High Road forums. Most are leaving out the hardner in the Prime All mix and adding a couple drops of Duco glue to a teaspoon of Acetone and using a drop of that. Good luck finding or making primers!

should you use any lube with the die?

@RooftopKY

2 жыл бұрын

It doesn't say anything about lube in the instructions.

Will these work for pistol caps?

@DoughboyJonesmk2

2 жыл бұрын

if you mean #10's they have a tool to make that size, too.

Do you sell them?

Guaranteed for pretty chain fire?

@RooftopKY

2 жыл бұрын

I haven't has a chain fire yet.

I bought this and made about 20 caps. Put a drop of acetone in each. Not one worked. Don't have any idea why. I know I mixed them correctly. I'm not happy at all.

@RooftopKY

3 жыл бұрын

Maybe try 2 or 3 drops and let them sit for a few days to really dry. I noticed that one drop didn't sometimes really make a good paste of the compound that adhered to the inside of the cap. If it's loosely adhered, it will fall out and not work. Hopefully this helps?

@markshriver3548

3 жыл бұрын

I've now made about 50 and only 3 have worked. I did notice that 1 drop wasn't enough to harden the powder. Maybe I'll try 3 drops and let it sit longer. I'm also thinking that it might be better for the cap to be half full instead of flush, but thanks for your reply.

@scottydu81

2 жыл бұрын

@@markshriver3548 I’m curious of the status now. I’m invested emotionally

@jimmydee41

2 жыл бұрын

I have got 20 made and all work great. I tried to check by hitting it with a hammer and it didn’t work but I put it in my gun and all worked great