@@audreyshanay-yn5oj I’m not sure, I’m not a pro but I’m guessing they are very similar in operation…
@black_hirad99842 күн бұрын
Thanks the video is very helpful and well made 🫂🙏🏻
@kd_enterprise34042 күн бұрын
@@black_hirad9984 thanks.. have a good day..
@Vinborne5 күн бұрын
Happy to see this video.. I’m contemplating getting the XT 250 and won’t ever take it on the 400 series highways but was wondering for the same reason how it would do for the M2 exit test, as I’ll have to do it on the 403 in Hamilton. Happy to see you at least got 109km/h. What’s your body weight ? Just wondering if I’ll get a similar top speed. Thanks ! 💪🏽 🏍️
@kd_enterprise34044 күн бұрын
The time spent on the 403 would be minimal, I did fine. The examiner understands this, basically they want you to see the entry and exit from the highway and proper lane change for passing... You don't need to actually pass anyone, just do the demo.... you be fine, one other person had a klx220 I think... they were fine also.... I was concerned also but having done it.. no worries...
@dougupah87784 күн бұрын
@@kd_enterprise3404 I know this is a 1 year old vid but I couldn't help but wonder if in Canada you have to do this for your license? Boy I guess I just take for granted that down here in the good ol' USA that a license is just a simple matter of driving through a few cones and a simple written test and off you go to do whatever you want with whatever bike you want! I'm getting a xt250 just to ride the trails in CO. wont be riding on any expressways.
@kd_enterprise34043 күн бұрын
@dougupah8778 things were simple at one time as in the USA BUT... now basically if you don't take the course as say a beginner.. you can't buy nor license a bike.. unless you have about 5000 a year for insurance. The second course is not mandatory and you can just go take the riding exam.. But it cost money each time... if u take the course you will pass and then u can get reasonable insurance.. mine in 417 for this year..
@Awrfaws7 күн бұрын
you have the link still?
@kd_enterprise34046 күн бұрын
@Awrfaws it's discontinued, but this one looks about he same, HOWEVER... this one like mine is 260mm. I do believe, and if I bought again I'd do a 250mm.. as a start... www.amazon.ca/absorber-260mm-Damper-Suspension-Shocker-70%E2%80%91150CC/dp/B09B25CFDQ/ref=mp_s_a_1_9_sspa?crid=39OK17MPLPHGE&dib=eyJ2IjoiMSJ9.eCsclJjDio86f3K3Iv47Il79QqQj5WGE8r-6ocxGt9Z8OMdilQx3CPCM9SS6GhOgi7dzsGNehMPUXiRAi_Gic6Jo0HJHGYr7PeczGIoY_u9QehI1c-6hGBqMHXYGrhJ-_np9df8VMcDIa7hj2K5_HOpsQurOaoYa5ZtEdrfadPpNc1EqQwm_ICV_-VjCiIWkENqn0sKSXPeQkyCHEnmV0w.TJ_HC0VHZLveyQ3Hlo3UdjLp0-DuTicJXxxYAtKcEr4&dib_tag=se&keywords=pit+bike+rear+shock+250mm&qid=1720175480&sprefix=pit+bike+rear+shock+250mm%2Caps%2C107&sr=8-9-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9waG9uZV9zZWFyY2hfbXRm&psc=1
@caddisking9 күн бұрын
Do yourself a favor and hire this one out. Its a real beaotch!
@rgruenhaus14 күн бұрын
Each time you filled one I never heard mention of whether they were reusable or store bought one-time use that you were refilling.
@kd_enterprise340414 күн бұрын
@@rgruenhaus the regulations vary depending where u live.
@rgruenhaus14 күн бұрын
@kd_enterprise3404 shouldn't be state determined! If it's a safety issue it's the same throughout the USA!
@francismarigomen659315 күн бұрын
What do the numbers mean at the bottom ?
@kd_enterprise340415 күн бұрын
@francismarigomen6593 at the start of video the numbers at bottom are the different models video applys to.
@francismarigomen659315 күн бұрын
@@kd_enterprise3404 got it. I tried the diagnostic . Everything works fine. But when i do a full recharge. The water inside my brine tank is not going down. I changed the venturi gasket but still the same. Any idea whats going on ?
@kd_enterprise340415 күн бұрын
@@francismarigomen6593 difficult to do online, but when the valve is set on the mode drawing water out of brine tank water should also be coming out of hose to wherever it drains during the backwash cycle.
@jamajson16 күн бұрын
Many thank for nice review. I have question about possibility to set initial value for ToT. I'm asking because I have an old tachometer which isn't reliable one and I decided to replace with Runleader. So I wouldn't be happy to start once again from "zero" ToT reading.
@kd_enterprise340416 күн бұрын
@jamajson honestly, I'm not sure...
@kd_enterprise340416 күн бұрын
@jamajson I'm really not sure, have not done that.. we will have to do some searching in the manual . Appreciate the comment
@jamajson15 күн бұрын
@@kd_enterprise3404I already checked manual but frankly speaking I don't see nothing about such possibility but in the Amazon in the description there is such info 🤔
@grantdubridge799518 күн бұрын
So what it comes down to, is that you did not adjust the rear brakes and your brake pedal is very low.
@user-mx8gx5gc6d19 күн бұрын
That screw that holds the fan blade on was a b*tch to get at.Huge design flaw.They should have designed it so it comes apart easy to clean.Won't take much to strip that little screw.
@kd_enterprise340419 күн бұрын
Yes, it’s. Goofy… however just be gentle…. I’ve been using the fan non stop for a few years and still running… a few cleanings and. Little lube on the shaft does the trick… 😂
@user-mx8gx5gc6d21 күн бұрын
That little bag of screws frustrated me so much I was going to take it back to the store until I watched this.They weren't the best instructions to follow.They talked about a buckle.A buckle? What
@tamertips130523 күн бұрын
Can i use this solar panel in combination with the coleman 8.5amp charge controller to charge a Lipo battery (Anker powerbank 522)?
@kd_enterprise340423 күн бұрын
If the charge controller does not indicate its for a lithium battery then in theory u should not use it long term... personally for me if the battery is being used or under a load, or to top it up I'd do it.. but again it's probably not recommended.
@zraker725 күн бұрын
I wish I could give this video a thousand thumbs up. Thank you problem fixed.
@kd_enterprise340424 күн бұрын
Thanks so much..
@roypaulcarter465425 күн бұрын
Varnish on wooden tool is usually done due to import export rules saying you have to have a hard coat to keep bugs out of the wood. Linseed oil will rehydrate the wood way better and provide a better grip when your hands are sweaty.
@jasonhodges987525 күн бұрын
I have a bolt in place of one of the retaining pins, I want a used off a guy at work and at first she told me the blades were stuck in gauge which was fine but now they turn on and off at will and now they won't turn on at all I'm not sure if it's a belt or what
@kd_enterprise340424 күн бұрын
With mower OFF, engage cutter, go under and see if the blade will spin by hand... if it spins its not properly engaged or a belt issue.
@roypaulcarter465425 күн бұрын
You might try raw linseed oil next time. The reason you may decide not to use any type of varnish is because when your hands sweat from doing hard work varnish can cause your tool to become slippery and you may lose control of it. You do not have this problem with linseed oil. Plus it is way better for preserving the wood. This is a teaching from those who deal with wooden weapons. God bless.
@kd_enterprise340424 күн бұрын
Yes the seed oil is very good.. I just used what I had on hand without spending money..
@escapefromny201225 күн бұрын
We don't need the annoying music.
@kd_enterprise340424 күн бұрын
Agree...
@wapper777727 күн бұрын
Okay do not ever I repeat *DO NOT EVER EVER EVER* apply lubricant to your brake system without extreme caution. Even a small amount of lubricant on your rotors or brake pads can easily cause your brakes to fail. If you must apply lubricant make sure to clean your rotors and brake pads with brake cleaner. Good video though, thanks for the help
@TheOneMalcolmАй бұрын
Well drums are supposed to be able to slide on that’s how you know they were done properly😊
@MichaelAxelKloseАй бұрын
Cheers to a fellow Canadian 🇨🇦
@kd_enterprise3404Ай бұрын
Thanks,!
@jrlongmeatАй бұрын
Would ya look at that
@captaincrunch72Ай бұрын
great video thanks.. time for my first oil change on my 2021 xt250
@kd_enterprise3404Ай бұрын
Thanks!
@stevenrobertson7069Ай бұрын
This is way there talk about taking these off the market..because of stupid people...they make refillable one's
@stevenrobertson7069Ай бұрын
Russian Roulette....1on1
@GRBHERBTPUSYАй бұрын
Thats the same alternator that my 3.7l magnum. O'reilly said they don't make a kit for mine. then I watched your video. And even though yours is a 4.7 . it's exact same numbers on top of your alternator everything is exact same on mine, so I think O'reilly's was trying to Get me to buy a three hundred dollars alternator, but I didn't. Lol
@kd_enterprise3404Ай бұрын
Lol.. awesome…
@felixdalnoki3904Ай бұрын
What u driving? I drive a bmw m1000rr
@kd_enterprise3404Ай бұрын
Yamaha xt250 for my off-road adventures.
@felixdalnoki3904Ай бұрын
@@kd_enterprise3404 cool!
@gardencat608Ай бұрын
Thank you SO MUCH for this video!
@kd_enterprise3404Ай бұрын
Glad it was helpful!
@gsoni79Ай бұрын
Very nicely explained I ended up ordering one.... Just wanted to know where to install the round cover ring wire.... On the cylinder head bolt is fine?
@kd_enterprise3404Ай бұрын
the only wire involved should be the one you wrap around the spark plug wire… I’d keep everything else away from heat and vibration…
@TC-bj8puАй бұрын
After every mowing I just slide a spray nozzle between the concrete and deck washing under the deck for a few minutes. Always super clean! That lift is nice for blade changes!
@carydunn1704Ай бұрын
Thanks, super helpful.
@kd_enterprise3404Ай бұрын
Welcome!
@cobaltss50Ай бұрын
That looks really good for 20 year old headlights, i appreciate the effort you put into making this video. I've been thinking about picking this kit up for my vehicle.
@kd_enterprise3404Ай бұрын
Thanks, I owned the car since new, it's always been outdoors, someone recommended I should have put the uv protection on thicker.. They still look fine so far...
@cobaltss50Ай бұрын
@kd_enterprise3404 I used the kit the other day after watching your video, I can't believe how excellent my headlights turned out, they look almost brand new. My car is a little newer 2014.
@kd_enterprise3404Ай бұрын
@@cobaltss50 glad to hear it worked well... 😃
@gregjones22172 ай бұрын
They're are much easier ways.
@RobMillerATV2 ай бұрын
I ride alone most of the time. I'm 50, and ride a xt250 as well. No way do I take unnecessary chances. I live in south western Ontario and look for unassumed side roads like that. That's the perfect kinda stuff for the xt. I'm really hoping to stretch the xt legs on a trip to the pick axe loop this summer. Not sure if I want to ride the 4plus hours up there or throw it in the truck. Lol. Been watching your channel for quite some time now.
@kd_enterprise34042 ай бұрын
4hrs to get to a start location is too much for me also, . I'm in mid 50's. I'm going to make a small trailer so I can get to further locations. My other thought, a person could stay at a motel. Do a day drive with many stops to rest my rear... lol.. I don't get tired, it just becomes uncomfortable.. spend a night, explore region, and another night stay, and drive back. Thanks for watching, I better do some new videos soon.
@RobMillerATV2 ай бұрын
@kd_enterprise3404 my plan was to camp as I go. Maybe a motel if need be. I make youtube videos as well, but focus on atv camping. I have enough gear to load up the bike for moto camping but haven't tried it all out yet. I'm not sure how the xt will do loaded up with camping gear and my fat arse on it lol. But I will do a test run with it before I head out to far.
@kd_enterprise34042 ай бұрын
@@RobMillerATV I’m sure the bike will be fine to get to location, I’m 220 and take a passenger often, and it does fine at say 350 total pounds. I just won’t do any Slightly challenging roads.. find a good camp spot, off load, then enjoy the area.. My issue with camping North of my area are Black flys, it varies depending on location and time of year. Ps I subbed to your channel, you have a truck which would handle a hitch carrier for the bike if you don’t want to roll it up a big ramp and put in box…
@RobMillerATV2 ай бұрын
@kd_enterprise3404 thanks for the sub! Iv only did one video of the xt. But I'd like to do more. I need to get a better mic for my full face helmet. I'm better geared for atv stuff, but working on it lol. I have a long trifold ramp that makes it easy to load up the bike and quad in the back. Fingers crossed get out lots those summer and do some filming.
@kd_enterprise34042 ай бұрын
@@RobMillerATV great....look forward to seeing.
@capefear32972 ай бұрын
Didn't see "kicking the tires" in the manual. Adjusted mine this morning.Thanks KD
@kd_enterprise34042 ай бұрын
Awe Thanks!
@brianbusch87772 ай бұрын
You talk way too much. Get to it man
@kd_enterprise34042 ай бұрын
Lol…
@rcg71572 ай бұрын
On my XT250, my gas light comes on around 170 miles.
@pinguzoe2 ай бұрын
it takes a week just to cross ontario on a trail la that. if you drive all day like 15h a day and troubleless
@kd_enterprise34042 ай бұрын
I’d love to do that trail from start to finish…. Yes even in the car it takes two days at 10 hrs per day… 😝
@markdavis88882 ай бұрын
Watching the video and reading the comments is like an episode of Jackass.
@beebop43332 ай бұрын
Nice. The only suggestion i have is pour the protectant on the rag after every wipe. You want a thick non running coat of uv protection. If u use one pour but 4 wipes, your protection decreases after every wipe.
@kd_enterprise34042 ай бұрын
Thanks for the productive comment, will do.
@straightopoint2 ай бұрын
Lawn mowers were built to be money pits.
@HisDearMissK2 ай бұрын
Once dry, would the stain ever bleed onto the clothing, say in a rainstorm or heatwave? ☺️ I'm quite overprotective of my white clothes and linens. Thanks
@kd_enterprise34042 ай бұрын
I have not had issues, if you have some leftover wood protector try a couple on things u are not worried about. I would not spend the money on paint to do this because the pins are not expensive….
@portuguese07772 ай бұрын
Is your mop still working its 2024 now?
@kd_enterprise34042 ай бұрын
Yes
@BlondieSL3 ай бұрын
Just a note about the updated kit(s). Now, rather that the pipe-piercing fitting that goes onto the copper pipe, they now have a fitting, where, you unscrew the flex pipe that goes to the cold water tap and screw their fitting onto the pipe fitting. This would be on top of the shutoff valve so that you will shut off the water for both filter and cold water. Then, you put the cold water flex pipe onto that and then use the fittings for the plastic piping that goes to the filter. I saw this in the kit I bought today, but I didn't like that it's made of nylong. So I spent a little more and bought brass fittings to replace that. Hope that helps.
@hotshotter45003 ай бұрын
FYI everyone this happens because the tank swells with pressure in the summer heat and causes it to split. A vented gas cap will help prevent this from happening
@naamacern10923 ай бұрын
How can I do it with GarageBand on the iPad ? I don’t have the app you are using
@kd_enterprise34043 ай бұрын
I do everything on a PC… sorry…
@anitarajput113 ай бұрын
Thanks angel
@phillipkalaveras17253 ай бұрын
Stop calling them valves.
@kd_enterprise34043 ай бұрын
Valve . Noun a device for controlling the passage of fluid or air through........
Пікірлер
Super informative! Thanks!!!
Will this be the same for the gxsH40n system?
@@audreyshanay-yn5oj I’m not sure, I’m not a pro but I’m guessing they are very similar in operation…
Thanks the video is very helpful and well made 🫂🙏🏻
@@black_hirad9984 thanks.. have a good day..
Happy to see this video.. I’m contemplating getting the XT 250 and won’t ever take it on the 400 series highways but was wondering for the same reason how it would do for the M2 exit test, as I’ll have to do it on the 403 in Hamilton. Happy to see you at least got 109km/h. What’s your body weight ? Just wondering if I’ll get a similar top speed. Thanks ! 💪🏽 🏍️
The time spent on the 403 would be minimal, I did fine. The examiner understands this, basically they want you to see the entry and exit from the highway and proper lane change for passing... You don't need to actually pass anyone, just do the demo.... you be fine, one other person had a klx220 I think... they were fine also.... I was concerned also but having done it.. no worries...
@@kd_enterprise3404 I know this is a 1 year old vid but I couldn't help but wonder if in Canada you have to do this for your license? Boy I guess I just take for granted that down here in the good ol' USA that a license is just a simple matter of driving through a few cones and a simple written test and off you go to do whatever you want with whatever bike you want! I'm getting a xt250 just to ride the trails in CO. wont be riding on any expressways.
@dougupah8778 things were simple at one time as in the USA BUT... now basically if you don't take the course as say a beginner.. you can't buy nor license a bike.. unless you have about 5000 a year for insurance. The second course is not mandatory and you can just go take the riding exam.. But it cost money each time... if u take the course you will pass and then u can get reasonable insurance.. mine in 417 for this year..
you have the link still?
@Awrfaws it's discontinued, but this one looks about he same, HOWEVER... this one like mine is 260mm. I do believe, and if I bought again I'd do a 250mm.. as a start... www.amazon.ca/absorber-260mm-Damper-Suspension-Shocker-70%E2%80%91150CC/dp/B09B25CFDQ/ref=mp_s_a_1_9_sspa?crid=39OK17MPLPHGE&dib=eyJ2IjoiMSJ9.eCsclJjDio86f3K3Iv47Il79QqQj5WGE8r-6ocxGt9Z8OMdilQx3CPCM9SS6GhOgi7dzsGNehMPUXiRAi_Gic6Jo0HJHGYr7PeczGIoY_u9QehI1c-6hGBqMHXYGrhJ-_np9df8VMcDIa7hj2K5_HOpsQurOaoYa5ZtEdrfadPpNc1EqQwm_ICV_-VjCiIWkENqn0sKSXPeQkyCHEnmV0w.TJ_HC0VHZLveyQ3Hlo3UdjLp0-DuTicJXxxYAtKcEr4&dib_tag=se&keywords=pit+bike+rear+shock+250mm&qid=1720175480&sprefix=pit+bike+rear+shock+250mm%2Caps%2C107&sr=8-9-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9waG9uZV9zZWFyY2hfbXRm&psc=1
Do yourself a favor and hire this one out. Its a real beaotch!
Each time you filled one I never heard mention of whether they were reusable or store bought one-time use that you were refilling.
@@rgruenhaus the regulations vary depending where u live.
@kd_enterprise3404 shouldn't be state determined! If it's a safety issue it's the same throughout the USA!
What do the numbers mean at the bottom ?
@francismarigomen6593 at the start of video the numbers at bottom are the different models video applys to.
@@kd_enterprise3404 got it. I tried the diagnostic . Everything works fine. But when i do a full recharge. The water inside my brine tank is not going down. I changed the venturi gasket but still the same. Any idea whats going on ?
@@francismarigomen6593 difficult to do online, but when the valve is set on the mode drawing water out of brine tank water should also be coming out of hose to wherever it drains during the backwash cycle.
Many thank for nice review. I have question about possibility to set initial value for ToT. I'm asking because I have an old tachometer which isn't reliable one and I decided to replace with Runleader. So I wouldn't be happy to start once again from "zero" ToT reading.
@jamajson honestly, I'm not sure...
@jamajson I'm really not sure, have not done that.. we will have to do some searching in the manual . Appreciate the comment
@@kd_enterprise3404I already checked manual but frankly speaking I don't see nothing about such possibility but in the Amazon in the description there is such info 🤔
So what it comes down to, is that you did not adjust the rear brakes and your brake pedal is very low.
That screw that holds the fan blade on was a b*tch to get at.Huge design flaw.They should have designed it so it comes apart easy to clean.Won't take much to strip that little screw.
Yes, it’s. Goofy… however just be gentle…. I’ve been using the fan non stop for a few years and still running… a few cleanings and. Little lube on the shaft does the trick… 😂
That little bag of screws frustrated me so much I was going to take it back to the store until I watched this.They weren't the best instructions to follow.They talked about a buckle.A buckle? What
Can i use this solar panel in combination with the coleman 8.5amp charge controller to charge a Lipo battery (Anker powerbank 522)?
If the charge controller does not indicate its for a lithium battery then in theory u should not use it long term... personally for me if the battery is being used or under a load, or to top it up I'd do it.. but again it's probably not recommended.
I wish I could give this video a thousand thumbs up. Thank you problem fixed.
Thanks so much..
Varnish on wooden tool is usually done due to import export rules saying you have to have a hard coat to keep bugs out of the wood. Linseed oil will rehydrate the wood way better and provide a better grip when your hands are sweaty.
I have a bolt in place of one of the retaining pins, I want a used off a guy at work and at first she told me the blades were stuck in gauge which was fine but now they turn on and off at will and now they won't turn on at all I'm not sure if it's a belt or what
With mower OFF, engage cutter, go under and see if the blade will spin by hand... if it spins its not properly engaged or a belt issue.
You might try raw linseed oil next time. The reason you may decide not to use any type of varnish is because when your hands sweat from doing hard work varnish can cause your tool to become slippery and you may lose control of it. You do not have this problem with linseed oil. Plus it is way better for preserving the wood. This is a teaching from those who deal with wooden weapons. God bless.
Yes the seed oil is very good.. I just used what I had on hand without spending money..
We don't need the annoying music.
Agree...
Okay do not ever I repeat *DO NOT EVER EVER EVER* apply lubricant to your brake system without extreme caution. Even a small amount of lubricant on your rotors or brake pads can easily cause your brakes to fail. If you must apply lubricant make sure to clean your rotors and brake pads with brake cleaner. Good video though, thanks for the help
Well drums are supposed to be able to slide on that’s how you know they were done properly😊
Cheers to a fellow Canadian 🇨🇦
Thanks,!
Would ya look at that
great video thanks.. time for my first oil change on my 2021 xt250
Thanks!
This is way there talk about taking these off the market..because of stupid people...they make refillable one's
Russian Roulette....1on1
Thats the same alternator that my 3.7l magnum. O'reilly said they don't make a kit for mine. then I watched your video. And even though yours is a 4.7 . it's exact same numbers on top of your alternator everything is exact same on mine, so I think O'reilly's was trying to Get me to buy a three hundred dollars alternator, but I didn't. Lol
Lol.. awesome…
What u driving? I drive a bmw m1000rr
Yamaha xt250 for my off-road adventures.
@@kd_enterprise3404 cool!
Thank you SO MUCH for this video!
Glad it was helpful!
Very nicely explained I ended up ordering one.... Just wanted to know where to install the round cover ring wire.... On the cylinder head bolt is fine?
the only wire involved should be the one you wrap around the spark plug wire… I’d keep everything else away from heat and vibration…
After every mowing I just slide a spray nozzle between the concrete and deck washing under the deck for a few minutes. Always super clean! That lift is nice for blade changes!
Thanks, super helpful.
Welcome!
That looks really good for 20 year old headlights, i appreciate the effort you put into making this video. I've been thinking about picking this kit up for my vehicle.
Thanks, I owned the car since new, it's always been outdoors, someone recommended I should have put the uv protection on thicker.. They still look fine so far...
@kd_enterprise3404 I used the kit the other day after watching your video, I can't believe how excellent my headlights turned out, they look almost brand new. My car is a little newer 2014.
@@cobaltss50 glad to hear it worked well... 😃
They're are much easier ways.
I ride alone most of the time. I'm 50, and ride a xt250 as well. No way do I take unnecessary chances. I live in south western Ontario and look for unassumed side roads like that. That's the perfect kinda stuff for the xt. I'm really hoping to stretch the xt legs on a trip to the pick axe loop this summer. Not sure if I want to ride the 4plus hours up there or throw it in the truck. Lol. Been watching your channel for quite some time now.
4hrs to get to a start location is too much for me also, . I'm in mid 50's. I'm going to make a small trailer so I can get to further locations. My other thought, a person could stay at a motel. Do a day drive with many stops to rest my rear... lol.. I don't get tired, it just becomes uncomfortable.. spend a night, explore region, and another night stay, and drive back. Thanks for watching, I better do some new videos soon.
@kd_enterprise3404 my plan was to camp as I go. Maybe a motel if need be. I make youtube videos as well, but focus on atv camping. I have enough gear to load up the bike for moto camping but haven't tried it all out yet. I'm not sure how the xt will do loaded up with camping gear and my fat arse on it lol. But I will do a test run with it before I head out to far.
@@RobMillerATV I’m sure the bike will be fine to get to location, I’m 220 and take a passenger often, and it does fine at say 350 total pounds. I just won’t do any Slightly challenging roads.. find a good camp spot, off load, then enjoy the area.. My issue with camping North of my area are Black flys, it varies depending on location and time of year. Ps I subbed to your channel, you have a truck which would handle a hitch carrier for the bike if you don’t want to roll it up a big ramp and put in box…
@kd_enterprise3404 thanks for the sub! Iv only did one video of the xt. But I'd like to do more. I need to get a better mic for my full face helmet. I'm better geared for atv stuff, but working on it lol. I have a long trifold ramp that makes it easy to load up the bike and quad in the back. Fingers crossed get out lots those summer and do some filming.
@@RobMillerATV great....look forward to seeing.
Didn't see "kicking the tires" in the manual. Adjusted mine this morning.Thanks KD
Awe Thanks!
You talk way too much. Get to it man
Lol…
On my XT250, my gas light comes on around 170 miles.
it takes a week just to cross ontario on a trail la that. if you drive all day like 15h a day and troubleless
I’d love to do that trail from start to finish…. Yes even in the car it takes two days at 10 hrs per day… 😝
Watching the video and reading the comments is like an episode of Jackass.
Nice. The only suggestion i have is pour the protectant on the rag after every wipe. You want a thick non running coat of uv protection. If u use one pour but 4 wipes, your protection decreases after every wipe.
Thanks for the productive comment, will do.
Lawn mowers were built to be money pits.
Once dry, would the stain ever bleed onto the clothing, say in a rainstorm or heatwave? ☺️ I'm quite overprotective of my white clothes and linens. Thanks
I have not had issues, if you have some leftover wood protector try a couple on things u are not worried about. I would not spend the money on paint to do this because the pins are not expensive….
Is your mop still working its 2024 now?
Yes
Just a note about the updated kit(s). Now, rather that the pipe-piercing fitting that goes onto the copper pipe, they now have a fitting, where, you unscrew the flex pipe that goes to the cold water tap and screw their fitting onto the pipe fitting. This would be on top of the shutoff valve so that you will shut off the water for both filter and cold water. Then, you put the cold water flex pipe onto that and then use the fittings for the plastic piping that goes to the filter. I saw this in the kit I bought today, but I didn't like that it's made of nylong. So I spent a little more and bought brass fittings to replace that. Hope that helps.
FYI everyone this happens because the tank swells with pressure in the summer heat and causes it to split. A vented gas cap will help prevent this from happening
How can I do it with GarageBand on the iPad ? I don’t have the app you are using
I do everything on a PC… sorry…
Thanks angel
Stop calling them valves.
Valve . Noun a device for controlling the passage of fluid or air through........
Thank you!