Пікірлер

• 
  @lisal1093Күн бұрын

  Thanks for the very clear instructions. This morning outside pane of my window broke millions of pieces with no any reason (I guess the glass is imperfect as this is a new house closing 15 months ago). May I ask if I can live with the single inside pane for a while before replacing or I have to call an emergency for a repair? Thank you in advance.

• 
  @roadglassandmore9064Күн бұрын

  Yes, you can absolutely live with one pane of glass, the only thing you might eventually see is the metal spacer between 2 panes start to rust after rainy season ( not all but some manufacturers use metal) , but that is also not a big concern. I’m assuming the glass was tempered ( heat treated) next to a door or in the bathroom? I see tempered glass break sometimes mostly in a summer time , because of different temperatures inside being cool and outside hot.

• 
  @lisal109316 сағат бұрын

  Thank you very much for the help. Yes, the glass is tempered ideally for Florida summer heat. There was a guy offering $450 for all. I saw online dual tempered glass for this size $225. After seeing your video I would like to give it a try myself. With the heat wave, I hope the single pane last enough certain of time.

• 
  @shawnifreeman5335Күн бұрын

  Easy to follow visual and clear oral instructions.

• 
  @roadglassandmore9064Күн бұрын

  Thanks!

• 
  @brandonaynesmay3524 күн бұрын

  Why do they do a u turn at an intersection? Like the worst place to do it. You can already tell just by that.

• 
  @george47864 күн бұрын

  Great info, thanks!

• 
  @troletti8 күн бұрын

  I have the same setup but there's an additional screw that holds the wheels from the top. It's covered by the glass. Your video got me 99% of the way there... Thanks!

• 
  @roadglassandmore90648 күн бұрын

  Oh, yeah, I’m familiar with that type of doors, they are not as common but that screw through the frame sure makes it more difficult. You will have to take the slider out and remove bottom rail unfortunately.

• 
  @steveandrushko7511 күн бұрын

  Excellent video

• 
  @roadglassandmore906411 күн бұрын

  Thanks

• 
  @tinkering12312 күн бұрын

  Hope you're channel does well. You're info is very helpful.

• 
  @roadglassandmore906412 күн бұрын

  Thank you.

• 
  @ScheilahGibson12 күн бұрын

  Where can you buy the rollers?

• 
  @roadglassandmore906412 күн бұрын

  There should be a link in description. But some home depot and Lowe’s sell rollers too

• 
  @tinkering12312 күн бұрын

  Amazon. But exact correct wheels and quality may take homework. Read all criticism. ​@@roadglassandmore9064

• 
  @tinkering12312 күн бұрын

  Amazon

• 
  @tinkering12312 күн бұрын

  Amazon

• 
  @user-jl3oz5hu5e19 күн бұрын

  Realy good info.

• 
  @chrisfrederickson510919 күн бұрын

  Don't forget to screw tight the door handle. Excellent video. I'm going to give it a try.

• 
  @roadglassandmore906418 күн бұрын

  Good tip! I think I forgot to mention it in the video!

• 
  @TheWebMindset20 күн бұрын

  Good video. Thank you!

• 
  @got2getit20420 күн бұрын

  How much

• 
  @roadglassandmore906420 күн бұрын

  Check with local glass shop

• 
  @MikeVirgo-ut9zz21 күн бұрын

  Not a quality window bead too flexible typical replacement videoe but missed the reason why it had to be replaced. One can only presume it broke down it’s not cracked or shattered .why did u not test the drainage for blockage obviously that was why it had to be changed.I think you will be back again to do the same thing.

• 
  @gregory828225 күн бұрын

  Brilliant ! Thanks.

• 
  @JohnSmith-ys4nl27 күн бұрын

  Is there a way to measure what size IGU I need without taking my current IGU out of the window?

• 
  @roadglassandmore906427 күн бұрын

  Yes; I have a video for that kzread.info/dash/bejne/pn-jqbyhhsa3kdY.html

• 
  @kevinlowe755228 күн бұрын

  isn't this a dual pane window,,, you completely skipped the part where you replaced the single pane? or did you just buy a pre-made dual pane window already glued together?

• 
  @roadglassandmore906428 күн бұрын

  The window is dual pane , there is no way to replace single pane with dual pane glass! Different thickness! We just order new dual pane glass to the size needed and come back to replace it.

• 
  @kevinlowe755227 күн бұрын

  @@roadglassandmore9064 ok, i thought you were replacing just one pane in the dual pane, it looked at first glance that only one side of the dual pane was broken,, i had one do that before

• 
  @Stephen-fb2znАй бұрын

  Watched ten other videos trying to find the info in this one. Thanks for not having a long intro and getting right to it with great information and a great narration. Thank you!

• 
  @czgu6398Ай бұрын

  Where can I buy the window glass?

• 
  @roadglassandmore9064Ай бұрын

  Try local glass shop/ glass supplier

• 
  @czgu6398Ай бұрын

  Where can I buy the sliding door window glass?

• 
  @roadglassandmore906428 күн бұрын

  Try local glass shop/ glass supplier

• 
  @katherinehobdy8203Ай бұрын

  How did you remove the frame?

• 
  @roadglassandmore9064Ай бұрын

  Slider part lifts up and out, fixed side there are 2 screws on the outside you have to remove, like in this video kzread.info/dash/bejne/nqWqsrOrdMzFmLA.html

• 
  @blackboxmobile7106Ай бұрын

  This is great. Thank you.

• 
  @delords3337Ай бұрын

  Thank you

• 
  @jmc6940Ай бұрын

  Were did you get the glass made?

• 
  @roadglassandmore9064Ай бұрын

  You should be able to order glass from your Local glass shop or glass supplier

• 
  @jasonlawrence8302Ай бұрын

  very good how to video, thanx

• 
  @roadglassandmore9064Ай бұрын

  Thanks

• 
  @RonzerАй бұрын

  Had I seen this an hour ago I wouldn't have taken the entire door off, lol....heavvvvvvy, ugh

• 
  @roadglassandmore9064Ай бұрын

  I used to take every door I worked on out for 5 years, until one guy at work showed me this trick.

• 
  @zswxde1Ай бұрын

  You did an awesome job.

• 
  @roadglassandmore9064Ай бұрын

  Thank you

• 
  @janakilennie8691Ай бұрын

  Thanks for the very clear video. We went from baffled to 'expert' in one go. 😊

• 
  @robintraina217Ай бұрын

  you still make look so easy

• 
  @RoverrtymАй бұрын

  i've been running prestone conventional green on my 17 x3 it has close to 10k miles , engine has never been opened. I don't think coolant color matters that much as long as you dont mix it.

• 
  @roadglassandmore9064Ай бұрын

  You are 100% right, you can run any coolant as long as you don’t mix it.

• 
  @juanrajara2887Ай бұрын

  Where do you go to get an exact replacement to put in?

• 
  @roadglassandmore9064Ай бұрын

  Try local glass shop/ glass supplier

• 
  @PhoenixArizona602Ай бұрын

  Can you show us how to repair a stationary glass on a trailer?

• 
  @roadglassandmore9064Ай бұрын

  Rv style window? I have never worked on one but briefly seen someone work on those, you have to take the entire window off the trailer make template of the glass , order it and pull frame apart to fit the glass. It’s not easy unfortunately

• 
  @sshaunssАй бұрын

  Freely pull it out yea that ain’t coming out for nothing I think it’s screwed in somewhere else

• 
  @roadglassandmore9064Ай бұрын

  Your door might be on if the few where the roller is held with a small screw through the bottom rail, in this case you will need to take the door completely out and remove bottom rail.

• 
  @sshaunssАй бұрын

  @@roadglassandmore9064 yea it was took the bottom metal off figured which ones it was and ordered two thanks. So if anyone else’s won’t move it’s probably same

• 
  @PDFurnitureRepairАй бұрын

  Great video. What's the best way to get an accurate measurement for the panel?

• 
  @roadglassandmore9064Ай бұрын

  Take the glazing/snap bead off to expose edge of the glass or watch this video How to measure double pane glass in vinyl window. kzread.info/dash/bejne/pn-jqbyhhsa3kdY.html

• 
  @nunya9574Ай бұрын

  Do the big box stores typically sell the double pane replacements?

• 
  @roadglassandmore9064Ай бұрын

  I don’t think so, try local glass shop/glass supplier

• 
  @peggyvansleen41502 ай бұрын

  Would you check my thoughts on my odd repair? Have you seen a sash where the trim is blocked by the other sash? I have the glass ready (it was under warranty) and ordered the tape. But the top trim of the bottom sash (that moves up and down but doesn't tilt... It's impact glass) is blocked by the upper stationary sash. I have to replace both anyway, so I'm planning to take top glass out, then carefully slide lower sash up to get the trim and glass out. Replace lower glass, slide up and down to get trim in and then replace the upper stationary window. Does that sound like a decent plan?

• 
  @roadglassandmore90642 ай бұрын

  Your have a perfect plan , especially if you are replacing the top part too! Also in most cases you should be able to remove the sash. Look up window spring balances removal online.

• 
  @peggyvansleen41502 ай бұрын

  Thank you! I will!

• 
  @StarknightMT_official2 ай бұрын

  Hello, Are you interested in testing our products? We would like to invite you to test the Rear Windshield for your Can Am maverick x3

• 
  @wstt42 ай бұрын

  Excellent video. Thanks. If I want to have the glass replaced on a 6’x6’ dual pane picture window (Milgard) and the house (on a hill) has settled a little so when I remove the frame molding, I can see the frame top has shifted a little to the left. Basically I see gaps between the glass and frame on certain edges of the but other edges the glass is right against the frame. It’s like the frame shifted a 1/2” to the left at the top. If ordering a new glass unit should I just go with the exact same size or will it possibly not fit? I don’t want to have the glass removed and then it can’t fit back in. Thanks.

• 
  @roadglassandmore90642 ай бұрын

  Take the measurements in 3 spots left side , middle and right side, and go with the smallest measurement ( remove glazing/snap bead this way you can see exactly where you are measuring to and where the existing glass seats )

• 
  @wstt42 ай бұрын

  @@roadglassandmore9064 thank you. When you say measure in three spots do you mean measure the existing glass in the 3 spots or measure the window framing it goes in, in 3 spots?

• 
  @scottreed74112 ай бұрын

  How did you know it was the gears and not the thermostat.

• 
  @roadglassandmore90642 ай бұрын

  It overheated almost instantly even when idling . Bad thermostat would take longer to overheat because little bit of coolant still flows through little bypass hole before it opens up, when gears break there is no coolant flow at all and engine will get hot within almost instantly.

• 
  @davidmentier99802 ай бұрын

  Great video. Thanks was going to replace the entire door until I seen this video.

• 
  @PaulBrown-sv7vm2 ай бұрын

  Any issues with discoloring or peeling paint on outside of trailer from welding heat? Thanks for videos you've done an awesome job.

• 
  @roadglassandmore90642 ай бұрын

  No issues, I tried to shim up and give it space between aluminum exterior skin and steel every time I was welding something. I even used wet rug sometimes to keep back of steel post cooler. It’s been few years and other than flat tire there is no issues, I redid the ceiling though, spray foamed it!

• 
  @PaulBrown-sv7vm2 ай бұрын

  Thanks for the reply. I've been thinking of taking on project like this since travel trailers are so poorly made

• 
  @willytrouble882 ай бұрын

  The problem I’m having is cutting the seal on the inside of the window. In your video, your knife goes through it like butter. My windows seem to be cemented in with some kind of hard epoxy that I simply cannot cut through. My next step is to try a heat gun to soften the seal, but really challenging. Any tips?

• 
  @roadglassandmore90642 ай бұрын

  Your glass is most likely sealed with silicone. Try a little heat on a putty knife, be careful not to melt plastic frame. Sorry for late reply

• 
  @willytrouble882 ай бұрын

  @@roadglassandmore9064thanks! I’ll give that a try.

• 
  @ab290862 ай бұрын

  Hey, thanks for this video. I am trying to follow your instructions, got all the way till opening the frame. But the roller wouldnt just come off. I dont see anything screwed for the roller to my door frame. Is it possible this is jammed as its a really old door? Is there any possible hack to release the rollers? Thank you

• 
  @roadglassandmore90642 ай бұрын

  Does the long corner screw screws into the frame? Or into the roller itself? If it’s screws into the roller ( there is threaded hole , usually on top ) if it does screw into the roller than the bottom rail needs to come off and you will see small screw through the rail holding the wheel. I screw screws into the frame than the wheel should come out may be use pliers, just be careful with the edge of the glass

• 
  @Antonio-gn5ql2 ай бұрын

  Excellent video! Respect!

• 
  @roadglassandmore90642 ай бұрын

  Thanks

• 
  @maryrine-marybel71182 ай бұрын

  Where do u get double pane window

• 
  @roadglassandmore90642 ай бұрын

  Local glass shop or glass supplier

• 
  @maryrine-marybel71182 ай бұрын

  Where do u get double Payne windows

• 
  @roadglassandmore90642 ай бұрын

  Local glass shop or glass supplier

• 
  @sarahsanders71272 ай бұрын

  I think that this was exactly what I needed - I'll know for sure when I try to do it, haha - thank you! Excellent video. 💖

• 
  @stevejanovec17862 ай бұрын

  Going to try this on mine hope it works. Mine looks close to this one mine has a hex head screw instead Philip screw

• 
  @roadglassandmore90642 ай бұрын

  It should work.

• 
  @mrgfspliff2 ай бұрын

  GREAT!!! Video!

• 
  @roadglassandmore90642 ай бұрын

  Thanks!

• 
  @ramonmartinez59293 ай бұрын

  What do you tow with

• 
  @roadglassandmore90643 ай бұрын

  2014 Nissan Titan

• 
  @marq62053 ай бұрын

  Oh wow, so you can simply remove the glass from the outside, burglars been doin it wrong all this time 🤦🏻 (in some cases).

• 
  @roadglassandmore90643 ай бұрын

  Yep. Need few tools though to remove the glass.