How to replace dual pane glass ( insulated glass unit ) in a typical vinyl window.
How to replace, fix failed or broken dual pane glass ( insulated glass unit ) in a vinyl / plastic window .
You can pitch in a dollar or more to support this channel @ PayPal.me/4rgam or @ ko-fi.com/fuzzyhat
Worlds best glass cleaner : ebay.us/HsXUWS
amzn.to/3gjl0AC
glazing tape : ebay.us/1xEU35
amzn.to/45WYNyz
Glass suction cup: ebay.us/aRM27w
amzn.to/2XuJPmg
Glass measuring caliper: ebay.us/zdyaIK
amzn.to/3n9yeBG
5 in 1 tool: ebay.us/pBUdUX
amzn.to/2XoI4a2
Пікірлер: 171
Holding the camera and doing the job at the same time 👍👏👏 thanks for sharing my man
Wonderful video. I shared/emailed it to my hubby, a little hint for him to fix our window. By the way, yours was the best video, out of 5 videos that I reviewed. Great job! 😃
@roadglassandmore9064
4 жыл бұрын
Thank you, let me know if you have any questions .
I’ve looked at several videos of how to replace the igu. Yours is the best. I’m ready to get it done. Thank you very much!
@roadglassandmore9064
3 жыл бұрын
Thanks! Glad I was able to help!
Wow I wish all DIY videos were as clear (no pun intended) as this one absolutely awesome job and the suggestion with the tails on the two sided tape was one of those jaw dropping moments I would have never thought of that.
@roadglassandmore9064
Жыл бұрын
Thank you!
@Mightyeldo
Жыл бұрын
Pretty much
Thanks for this excellent tutorial, and thank you especially for the product links. I had already ordered some glazing tape on Amazon before finding this video, but when I clicked on your link it took me to the same glazing tape I had already ordered. So you basically confirmed for me that the tape I ordered is the right product for the job.
@roadglassandmore9064
3 ай бұрын
Make sure the tape is 1/16 thick it’s the most common thickness .
I have three 30 year old vinyl windows to replace that have lost their seals just like these. You did a great job showing tools and tool use. I was most curious how to remove the outer snapping strips, and you did a good job explaining that. I was also worried about the snapping strips being brittle because of UV light and years, and you answered that. I just have to figure out where to get replacement windows now. Great job!
@roadglassandmore9064
3 жыл бұрын
Thank you! I would order your glass from a local glass shop/supplier.
Thanks, great video/ explanation. God bless you and your family and business.
I don't have a slider, so I'll be looking into your vids to see about DH vinyl. Just wanted to say great video-and even better are your replies to questions in the comments!! Bravo!!
@roadglassandmore9064
10 ай бұрын
If it’s a vinyl window, the process should be the same , take the glass stops off and cut the glass out of the frame, most double hung windows can tilt out, slightly open it and there should be tilt latches on top , one on each corner. Hope this helps!
Thank you sir for your expertise. I learned a lot from you, and I am going to fix my window.
@roadglassandmore9064
3 жыл бұрын
You are welcome, glad I was able to help!
Thanks. Your video was straight to the point. No back stories; bla bla bla...
Great tutorial, thank you!
Good video. Thank you!
Very helpful! Thank you for posting these!
@roadglassandmore9064
2 жыл бұрын
Thanks!
Man, that's _the_ best video on this topic!
@roadglassandmore9064
Жыл бұрын
Thanks!
Great tutorial sir. Thanks
Excellent instructions. Thank you
@roadglassandmore9064
4 жыл бұрын
Glad I was able to help!
Excellence glass replacement for w/d video!
@roadglassandmore9064
4 жыл бұрын
Thank you!
Extremely helpful! thank you.
@roadglassandmore9064
3 жыл бұрын
Glad I was able to help!
Do I feel stupid…I cracked the outside glass, I didn’t know it could be fixed, so stupid me, I bought a whole new window. I need to replace the weather stripping on a couple if windows, my fear of breaking the glass has be paralyzing. Now I know…Thanks this was a great video.
You did it one handed
@roadglassandmore9064
3 жыл бұрын
Yep, had to use my other hand to hold the camera.
@lobdsk
3 жыл бұрын
@@roadglassandmore9064 you should work as a glazier lol
@roadglassandmore9064
3 жыл бұрын
Lol.
@glendacruz3142
3 жыл бұрын
My dual pane window grid fell off inside the window and no glass window company wants to remove it but replace the whole window. Do you know anybody here in San Diego who can do it.
this is incredible! subbed and like! Thanks for the video!
@roadglassandmore9064
Жыл бұрын
Thanks.
excellent instructions, thanks!
@roadglassandmore9064
Жыл бұрын
Thanks!
Well explained!!!!
Awesome! THANK YOU
Great Video
@roadglassandmore9064
10 сағат бұрын
Thanks!
You just saved me sooo much money
@roadglassandmore9064
Жыл бұрын
Glad I was able to help!
@got2getit204
Ай бұрын
How much would it be?
Great video..very helpful...❤
@roadglassandmore9064
10 ай бұрын
Thank you
Good video, thanks.:)
@roadglassandmore9064
3 жыл бұрын
Thanks you!
You replaced the sliding window glass. What about the other piece of glass in the fixed part of window, the non sliding piece. How do you fix the other piece? Thanks
@roadglassandmore9064
2 жыл бұрын
The fixed part is replaced the same way like the sliding part!
Great video!!!!! That I was waiting for replacing couple of condensation(foggy) dualpane glass on the windows. Your video shows how to replace dualpane glass on the window which I guess it is same method for condensation(foggy) dualpane glass replacement. Any suggestions will be much appreciated. Thanks John
@roadglassandmore9064
Жыл бұрын
Yes, the process of replacing glass in the video is the same for foggy or broken windows in vinyl/plastic windows. The only thing some windows are sealed with silicone and majority manufacturers used double sided tape, but you will determine that as soon as you remove the glass.
@jkk040
Жыл бұрын
@@roadglassandmore9064 wonderful... Thank you so much...
Local glas shop sold me a new igu as I plan to diy the repair from hail damage. I plan to use 100% silicon instead of the tape. The shop owner says its actually a better seal; however, all of these videos use the tape. Is there any problem using the sicon other than the cleanup?
@roadglassandmore9064
11 ай бұрын
Shouldn’t be a problem, the glazing bead (plastics snap in stops) May be not tight against the glass, because tape gives extra 1/16 on an inch thickness. But you should be fine, if any silicone squeezes out , clean it up with flat blade.
Thanks. Nice educational video for me. If I’ve got 2 Milgard Classic 6’ x 6’ vinyl picture windows where the glass needs replacing, would the glass be installed from the inside or outside the house? If my current windows are 1” overall glass thickness but I don’t know if it’s two 1/8” panes or two 3/16”, does it make a difference if the replacement glass is the same individual glass thickness? It’s for a very windy corner of the house. Thanks.
@roadglassandmore9064
5 ай бұрын
Hi. Most Millard windows the glass is set from outside. Double check the overall thickness , some classics picture windows are 7/8 OA, I have one in my house and it’s 7/8. 6’ x 6’ are pretty big windows and being on windy side I’d recommend ordering 3/16 over 3/16, it’s going to be pretty heavy so make sure you have second person to give you a hand.
Great video! Thank you for taking of your time to share your knowledge. It is greatly appreciated. I am looking to replace a Ply Gem dual pane for one of my room windows that I can just order brand new from Home Depot, same brand. I am trying to figure out the tape. So what is the width you recommend be used? I know the thickness is 1/16", but what about the width? There are so many different ones that is hard to decide. Also, you recommend only tape or both tape and caulking? If caulking, which one would you recommend? My window has snap beads on both sides, both exterior and interior, is that normal? Thanks!
@roadglassandmore9064
Жыл бұрын
Hi. The tape width is about 5/16-3/8, there should have links in the description. If your existing window is plygem, than you only have snap bead in the inside, the overall thickness of the glass unit is 5/8, and for some reason ply gem uses white silicone to seal the glass ( tape only on strike side of fixed panel) so in your case I’d just use silicone, it’s very difficult to use tape after you scrape old silicone off the frame, tape doesn’t stick very well. I hope this helped Thabks
@Coamex
Жыл бұрын
@@roadglassandmore9064 Thanks for the information! Last question: Which silicone would you recommend for this job?
Great video. I need to replace a bad IGU on third floor. I am not able to break double tape/silicon caulking from the outside vinyl window. How should I pull out the bad double pane glass to measure the size and replace with new one. thanks:)
@roadglassandmore9064
4 жыл бұрын
Can you walk up to the window from the inside of the building? You can measure “daylight “meaning just measure the glass that you can see, frame to frame and add 7/8” to your measurement. I have a quick video on how to measure the igu. kzread.info/dash/bejne/pn-jqbyhhsa3kdY.html
Hi, great video, Is using the double sided tape as good as using a silicone to seal the glass to the frame? We recently had a company use silicone when replacing low-e glass panes that were leaking with new thermopanes, and they made an absolute mess with the silicone, and it looks terrible. Wish they had used your method for adhering the glass to the frame. :-(
@roadglassandmore9064
3 жыл бұрын
Thanks! Some window manufacturers use silicone to seal the glass to frame in that case it’s best to use silicone because it’s almost impossible to clean old silicone residue off the frame to get the double sided tape to stick. Some times silicone bead ( if too thick or to close to the edge) squeezes out a little, but they should have cleaned it up on the new glass! You can try cleaning the mess with flat razor blade and to wipe off remaining residue use a rag and denatured alcohol.
How do you measure the glass without removing it? Is the overall thickness of a double pane glass standard on vinyl windows?
@roadglassandmore9064
4 жыл бұрын
I have a quick 2 min video on that: kzread.info/dash/bejne/pn-jqbyhhsa3kdY.html I would say most common overall thickness on vinyl windows is 3/4 “, but to be 100% certain I would pop glazing/snap bead off and stick a thin putty knife or even a thicker piece of paper between frame and the glass, then mark it along the glass with a pen or pencil, pull it out and measure it. Or you can get a caliper( link should be in the description of the video) Hope this helps!
You're the window man.
great video. where did you buy your glass? I'm almost resigned to buying a whole window and just using the glass. Seems cheaper
@roadglassandmore9064
3 жыл бұрын
You can search your area for glass supplier and see if they will sell glass to you directly , that would be the cheapest way. Or just go to a local glass shop and order the glass through them, but glass shop get their glass from glass supplier and mark it up a little.
I have a 67x67" window that had been replaced about 3 years ago and water was leaking out the bottom onto the window sill. I pulled out the glazing beads to inspect it and then had to leave for a couple of hours to attend a meeting. When I came back, the window had fallen in. Based on my previous experience with other silicone sealed windows (although smaller) and the difficulty of breaking the seal, I would not have expected this to happen and am having a disagreement with the company that installed this window as to whether I was negligent by taking out the glazing bead or they were negligent by not doing a good job putting the sealant on during it's installation. Any thoughts? Thanks.
@roadglassandmore9064
2 жыл бұрын
The glass should have not fallen out if you take the glazing bead off and it should have not leaked around the glass either.My opinion is the company that installed it did poor job sealing glass to frame!
Thank you for posting this! I'm needing to replace the glass on the other side that doesn't slide, is it the same process for the most part?
@roadglassandmore9064
4 ай бұрын
Yeah, process is the same for other side. I actually have a video on that too. kzread.info/dash/bejne/oaSZxbCgh8bYY5c.htmlsi=zwvvt8oke1fVoqbv
@SuziPoozi
4 ай бұрын
@@roadglassandmore9064 Great! Thank you so much!
Does it matter which side is facing out on low-e glass? Great video.
@roadglassandmore9064
2 жыл бұрын
Technically you want the low e side facing out.
where would you get replacement glass, as a DIYer? Thanks for awesome video
@roadglassandmore9064
3 жыл бұрын
Local glass shop, or glass supplier.
Milgard came out to replace some failed IGUs that were under warranty. These units were all originally sealed into the frame with silicone, but they used double sided tape on all the replacements. My windows are no longer under warranty and I'll be replacing some others myself. I'd like to use tape instead of silicone....any recommendations on the best way to prep the surface for tape? I didn't watch Milgard closely enough when they were out.
@roadglassandmore9064
Жыл бұрын
The best way to prep the window frame is to scrape old tape off and wipe it down with denatured alcohol. Hope this helps!
@sushijeff1
Жыл бұрын
@@roadglassandmore9064 Thanks for the quick reply. I meant that I want to put tape in the place where there used to be silicone (when Milgard came out, they used tape in the frame where silicone used to be). So I know that's actually not recommended, since tape may not stick to residual silicone. Should I avoid using tape where silicone had been, or just scape the old silicone, wipe with alcohol, and then use tape? Thank you.
My vinyl trim was really brittle due to exposure to the weather. Where would I be able to purchase replacement trims from?
@roadglassandmore9064
2 жыл бұрын
You can try looking online, or try your local glass/window shop/supplier.
Did you ever find a link to that handy roll of double-sided tape? Lowes/Home Depot say they don't carry them. I thought they did. Thanks for the good video.
@roadglassandmore9064
3 жыл бұрын
Links should be in description, let me know if they don’t work and I will fix them. Thank you.
@bobrunge7594
Жыл бұрын
@@roadglassandmore9064 I cannot find a link to the description of this tape.
@peteryee9754
7 ай бұрын
curious question of why you're using double sided tape vs silicone?
What kind of silicone do u recommend? I'm replacing a shattered sliding door glass thanks in advance.
@roadglassandmore9064
2 жыл бұрын
Regular clear silicone ( ebay.us/TD2W23 ) or mildew resistant clear silicone. But if the window manufacturer used double sided tape ( you will see it when removing the glass) it’s recommended that you use tape again ( ebay.us/CAWtxA )although you can use silicone in either case just give it 24 hours to dry, try not to use/ open your door until it sets.
Is there a way to measure what size IGU I need without taking my current IGU out of the window?
@roadglassandmore9064
Ай бұрын
Yes; I have a video for that kzread.info/dash/bejne/pn-jqbyhhsa3kdY.html
Have to replace the center (fixed) panel, having extreme difficulty cutting the clear silicone adhesive with razor knife. Vinyl frame. Can I heat it with hot air gun? Window is 1 year old, made by Solar Industries. Any advise?
@roadglassandmore9064
3 жыл бұрын
Oh yes, that clear adhesive can be real pain to cut. I use powered multi tool with thin blade on it for instances like that. But I would not recommend heating up your blade ( although it would work a lot better) because you will probably melt the window frame a little while cutting the glue. Try using very thin and flexible putty knife, it’s hard but doable .
@stevematzke1428
3 жыл бұрын
Road Glass and more I was able to replace the panel, I heated a 1 1/2 inch flexible putty knife to 400 degrees, and was able to separate without frame damage. 3 hour’s in cutting and cleaning silicone, but finally done. Used glazing tape to install. Never again. Thanks for assistance .
I'm trying this to replace failed glass in my Weather Shield windows and I'm fighting the corner moulding that holding the glass in. It appears they use a locking system to discourage glass replacement.
@roadglassandmore9064
Жыл бұрын
Some of the glazing bead is hard to remove . I’m not familiar with weather shield window brand, from quick search they look like wood and fiberglass windows. Some wood windows are not designed for glass to be replaced, the hole sash needs to be replaced, and if it’s fiber glass the glazing bead is really hard to take out but it should come out.
Do you know how to take apart a peachtree sash to replace the ig? Please let me know if so. I can't figure it out
@roadglassandmore9064
Жыл бұрын
I’m not familiar with that window brand, but from quick google search it looks like those are wood windows , I couldn’t find upclose pics. But my assumption is that they are not designed for the glass to be replaced, the entire sash need to be replaced ( I could be wrong though,without close inspection of the window) .
Can this same concept work to repair the fallen grid in between 2 panes of glass? I’ve called several window places and they all say that I need to replace the entire window. Seems like this route would be a faster, cheaper alternative.?
@roadglassandmore9064
3 жыл бұрын
The grid is between 2 panes of glass, so unfortunately you can’t fix/replace just the grid, new glass need to be ordered with grid inside.
@lh876
3 жыл бұрын
Thank you!
Can we do this procedure with upstairs condo unit Without doing it from the outside?
@roadglassandmore9064
2 жыл бұрын
Probably not, most of the windows designed for the glass to be removed from outside.
Can the glass be changed in a double hung window that has laminated glass?
@roadglassandmore9064
Жыл бұрын
Yes, you should’ve be able to change the glass in double hung window, I only have came across one window brand ( Anderson) where some of those windows not designed for glass to be taken out and replaced
I have a client that the non active side broke on. Do you do it the same way for the stationary side? How do you remove it?
@roadglassandmore9064
10 ай бұрын
Yes, process is the same for stationary side too! I have a video on my channel too .
@jamespearcelocksmith8275
10 ай бұрын
@@roadglassandmore9064 thank you. What’s it called?
Wow just had my window replaced today and that black little rim is all folded inside and different places 😑
What size adhesive tape are you using ? Do you have a link for it ? The one you have in your bio is not working. Thanks!
@roadglassandmore9064
8 ай бұрын
1/16 glazing tape www.ebay.com/itm/253932783692?hash=item3b1f92c84c:g:j2IAAOSwtItbwpnD&amdata=enc%3AAQAIAAAA4Hn2cRc3PaLP2cX%2BdGHku7vGsRTuJpNtt2R7VOcm7N1i4%2BNejj6Ndkzp53jIE6XjOJUeuG5EXTtB%2B1xvXryPUBu%2B8C2XiGEW%2FLROAeqPlEMuyY%2FwlOYo1NiCHkJmoHv23FC4N5ffa0zowYPwDEyQb%2BucCJ%2BqKBSXvW2L3En1pOBYZ0yMQX0CGMtCbO7NlPVQzB4ozz%2Fd8Xmx2yqzKaWWKGWD8vH6Unmz6UhZnllrKALpwC1bkljEm5Tr5RLl%2FbLi88s5XJW3uOTIjyjZBO1uEJ6SrkxTsizSIbG0m%2BH8qFZF%7Ctkp%3ABFBMmq-N-PBi
Any idea where to buy replacement igu if i am diy?
@roadglassandmore9064
3 жыл бұрын
Local glass shop or glass supplier. But so you know every igu is made to order, so you will have to wait a day or two.
Where does one get replacedment double glazed glass panel
@roadglassandmore9064
5 ай бұрын
Local glass shop or glass supplier
Where can I buy the sliding door window glass?
@roadglassandmore9064
Ай бұрын
Try local glass shop/ glass supplier
Where do you go to get an exact replacement to put in?
@roadglassandmore9064
2 ай бұрын
Try local glass shop/ glass supplier
Does an Eglass window have an inside/outside? How do I know which way it goes in?
@roadglassandmore9064
2 жыл бұрын
Yes , the Low E coating is only on one pane of the glass and it always goes to the outside, it’s kinda difficult to tell with untrained eye, but if you look closely it has slight green almost purple tint , also if you have polarized glasses put them on an take it out in the sunlight and you will see it . Also you can run your fingers down the glass and the side that has coating will fill smoother, almost like slightly lubricated. Hopefully it makes sense, it’s kinda hard to describe/explain it in words.
@labradorguy5311
2 жыл бұрын
@@roadglassandmore9064 Ok thanks! gr8 video
My window is sealed with silicone sealant/adhesive. Having a tough time getting it out. Is there a tool for this? TIA.
@jeffthomas5866
2 жыл бұрын
By 'getting it out', I mean cutting the seal.
@jeffthomas5866
2 жыл бұрын
Never mind, sharpened one wide of a medium width scraper and it worked fine.
@roadglassandmore9064
2 жыл бұрын
Some window manufacturers used clear sealant and it is pretty hard to cut, I have oscillating tool / multi tool with supper thin blade on it, that makes the job a lot easier. Also since your glass was sealed with clear sealant I’d recommend using a clear silicone again , just make sure to scrape old sealant off the frame as much as you can.
Where can i purchase a double pane glass from?
@roadglassandmore9064
4 жыл бұрын
Local glass shop or glass supplier.
Were are you located i want to replace my kitchen window it broke. Please
@roadglassandmore9064
4 ай бұрын
Sacramento area
How much is a glass for a 48x48” slide window compare to a new window.
@roadglassandmore9064
Жыл бұрын
Where I live ( Northern California) glass would cost you around $160 +/-and around $300-$350 installed, new window will cost you around $350+ not including installation
how can I buy the igu and what the proper way to measure the unit outside to outside? or inside to inside ?
@roadglassandmore9064
2 жыл бұрын
You can buy it at local glass shop/glass supplier. If your windows are vinyl/plastic then just measure the visible glass part (frame to frame ) and add 7/8 to that. The overall thickness is a bit more tricky to measure, you can remove one of the glazing bead/ plastic stop and put piece of thick paper( or anything thin enough) between frame and the glass and put a mark then just measure from edge of paper to the mark. Here is a link to one of my vids.: kzread.info/dash/bejne/pn-jqbyhhsa3kdY.html
@deets29mtb53
2 жыл бұрын
@@roadglassandmore9064 thank you
Great video, how can I know the glass color I have to order?
@roadglassandmore9064
3 жыл бұрын
Well , it’s kinda hard to explain here, but if it’s residential window and less than 10 years old most likely it will be low e glass (energy efficient glass) it will have slight green reflection/tint on it on a sunny day, if you have polarized sunglasses you can really tell the difference on a sunny day! Also you can put whit sheet of paper on the inside, if it looks perfectly white from the outside then the glass is clear! Hope it helps!
@gersonpaulochaves4139
3 жыл бұрын
Road Glass and more it helped a lot tank you
What would cause a pane of glass to crack from the corner ?
@roadglassandmore9064
4 жыл бұрын
Most likely settling, but also could be point of impact.
@scrogathon
4 жыл бұрын
@@roadglassandmore9064 it happened when it was in the dead of winter. Window was never hit with anything just cracked from one corner to the next.
@frankvasquez1387
Жыл бұрын
@@scrogathon Demon Kids are the number one cause of broken windows!
Hello Sir, very helpful video! But I need to replace the stationary part of a window with a slider. Do you have a video on how to replace that? Thanks!!!!!
@roadglassandmore9064
3 жыл бұрын
Yes, I have videos on glass replacement on stationary side! kzread.info/dash/bejne/oaSZxbCgh8bYY5c.html
How can’t I contact you i have a broke Window
@roadglassandmore9064
3 жыл бұрын
You can ask questions here
The tape in the link is no longer available! Do you have an updated link?
@roadglassandmore9064
2 жыл бұрын
Thank you for letting me know, I updated the link . ebay.us/CAWtxA
@bobrunge7594
Жыл бұрын
@@roadglassandmore9064 Nope...doesnt work
@priorscience
Жыл бұрын
@@bobrunge7594 you might be able to buy from local glass shops, but you can also buy online. If you search for foam glazing tape there should be options for purchasing online under shopping on your browser.
@bobrunge7594
Жыл бұрын
Found it on eBay. Thank you
Why doesn't anybody mention the stationary pane ???? does it come out ?
@roadglassandmore9064
Жыл бұрын
Same process for stationary side
Where can I buy the glass and how much will cost me
@roadglassandmore9064
3 жыл бұрын
You should be able to order it (dual pane are made to order, there is really no standard size ) at you local glass shop or even directly at local glass supplier! It will cost you roughly $ 5-7 a square foot!
@francisconolasco5538
3 жыл бұрын
mormore thank you for answer my question
I have to redo again. Water is leaking in, it is hard to press and seal it all around
@roadglassandmore9064
11 ай бұрын
It’s hard to press and seal the double sided tape? Did your window have silicone originally? You might want to use clear silicone if tape doesn’t stick
@kack7130
11 ай бұрын
@@roadglassandmore9064 yeah, i removed old residue glue from metal frame. These things are tricky, it takes skills. I am very new to this but I can't be paying $400 per window for this.
How much
@roadglassandmore9064
Ай бұрын
Check with local glass shop
I guess they cut the glass in the shop and bring it to the job.
@roadglassandmore9064
3 жыл бұрын
We only cut single pane glass on the job site., all dual pane glass is ordered.
Not a quality window bead too flexible typical replacement videoe but missed the reason why it had to be replaced. One can only presume it broke down it’s not cracked or shattered .why did u not test the drainage for blockage obviously that was why it had to be changed.I think you will be back again to do the same thing.
@chris03661
5 сағат бұрын
Main point was to show how to change the glass. The reasoning isn’t needed for someone to demonstrate that. Obviously, a person will have crack or other issue if they made it to this video like me.
Remove the stops before separating/cutting it away from the frame. This relieves pressure so it’s easier to get your knife between the glass and frame. If you notice your glass is installed with 2 side foam tape. You can actually order your glass 1/16th heavier on the thickness so you can skip taping it and just run a bead of silicone around the perimeter. (After you clean the old tape off of course.) I’d rather caulk than run tape. Also at 9:42 did you call the stops “snappies” you’ve lost your credibility. -glazier 20yrs
@roadglassandmore9064
2 жыл бұрын
I called it “ snap bead” pardon my accent. I understand you can order IG 1/6 thicker and run silicone, I just tried not over complicate things and confuse general public. But good pointer on removing stops first to relive the pressure!