Пікірлер

• 
  @RedDwarff2 күн бұрын

  Your gator looked a bit stiff going back on. You need to make sure you havent got exess cloth clipped in at the top and its fully clipped in with grease on the shaft so it slides the pull mechanism up and down easy to select reverse

• 
  @dokesz5307 күн бұрын

  lights output is worst then stock.

• 
  @mikegaming38269 күн бұрын

  so what are the benefits of having this??

• 
  @thenewbiegardeneruk45759 күн бұрын

  My dog has launched a salami sausage under mine ffs that's why I'm here 😂

• 
  @cheyennepritchett158310 күн бұрын

  Dropped my AirPod. Thanks for the video.

• 
  @JL-089 күн бұрын

  I knew I wasn’t the only one 😅

• 
  @robertadamczuk560823 күн бұрын

  Shouldn't you change fuel pipes for news obce? Won't they leak when reused?

• 
  @KillaMehlo28 күн бұрын

  What are the symptoms of a damaged coil pack

• 
  @d4rkillrs98329 күн бұрын

  This is so stupid you doing it in the dark

• 
  @davidriley9194Ай бұрын

  Are the HIDs 6000k or 8000k? I believe HIDs do work a lot better especially if you have projectors!!😊

• 
  @gabrieltumaeletse6181Ай бұрын

  Yewenwh😢

• 
  @goldfred66Ай бұрын

  Thanks for a clear video of this.. And tip on string!

• 
  @jasonstatham4834Ай бұрын

  Would be great if you showed us how to disconnect the plug in connector mate having a nightmare here

• 
  @KillerStidgeАй бұрын

  Ive taken these apart fully, they fail further in on a mini circuit near the smd’s but once the unit is dismantled it never really goes back together - if anyone elses fails just buy an aftermarket set

• 
  @tltt3902Ай бұрын

  Which fuse type did you use broski?

• 
  @mackinen2007Ай бұрын

  Hi there, how did you clean the engine? looks pretty nice

• 
  @roysendall676Ай бұрын

  Thank you so much, my car key went down the hole so I unscrewed the back too bolts and my wife could just get fingers in and retrieved the key thanks once again for the video.

• 
  @SmDWeed2 ай бұрын

  What octane mode do you switch it to when you have let's say 1/5 of the tank filled with 97 octane and then top it off all the way with 98 octane? Can you switch over to the 98 map?

• 
  @MrDeathMachine2 ай бұрын

  Mine has this rattling sound when I’m just cruising at 40 and not accelerating. Almost like it’s loose somehow. Any ideas?

• 
  @CarefreeCFC832 ай бұрын

  Nice guide, will try doing this on mine next month. :)

• 
  @Hobobo19732 ай бұрын

  Fitted one and added 15bhp Jokes it adds a nice touch to my st260

• 
  @sashaghovanlou81752 ай бұрын

  Great attempt buddy! Buy yourself some flux for future soldering projects, it will make your life alot easier!

• 
  @TheAdamgrose2 ай бұрын

  I just lost my 3rd vape down the hell hole!

• 
  @waverider57512 ай бұрын

  It’s have been easier if you’d jacked it up on stands and pull the right front tire.

• 
  @waverider57512 ай бұрын

  Get a Red button replacement for your KZread sticker… just looks better.

• 
  @Qelyn2 ай бұрын

  How do you get to those bolts on the side

• 
  @Qelyn2 ай бұрын

  On the front screws it has these shit rubber screws that won’t come out for shit and I don’t know what to do

• 
  @SeanHannah-ph4wm2 ай бұрын

  Hi Just watched your video and found it super easy to replace the fuse to the sub woofer - was not sure where the power was coming from - so super vid helped me out big time!!

• 
  @justinmiller89932 ай бұрын

  Thanks bud for the video. I was adjusting the handbrake and this helped me a lot 👍

• 
  @schon743 ай бұрын

  Brilliant I'm gonna give this a go 👌

• 
  @jameswilliams3093 ай бұрын

  Done everything exactly the same but my yellow warning light is staying on? Any ideas? Thanks

• 
  @ryanhaverkamp44043 ай бұрын

  Anyone know how to turn off the airbag light?

• 
  @vasili12072 ай бұрын

  Fix it or replace it .... light goes off

• 
  @joostonline51463 ай бұрын

  dont protect your door at all

• 
  @thotslayerrob98824 ай бұрын

  I dropped a small piece of onion of my burger whilst i was eating it and ofc the hell hole swallowed it😢 Im not bothering to do all that just to remove a piece of onion. Hopefully it wont stink though😂

• 
  @Chaddy9n34 ай бұрын

  Does the BAP,V show actual boost pressure? Thank you

• 
  @lucasjones25164 ай бұрын

  Hi do you have a direct link to the hole of hell bit you fitted in the video

• 
  @lowmaniac4 ай бұрын

  Its good for peugeout 407 berlin?

• 
  @mXsReaper4 ай бұрын

  Just dropped my buds 2 pro in there. This video is a godsend. F Ford for this obvious design flaw

• 
  @jamesscarcraze12855 ай бұрын

  So ive been running 6000k HID's in my fiesta projectors and they do a greay job although i forgot to take them out before my MOT and they failed them due to the scatter. I dont know if HID bulbs have the true 1:1 of a halogen but im happy with HID's as super bright. I have just purchased this kit to see if these are just as bright as HID's as im afraid im atill blinding people with HID's despite the cut off from projectors. Would be nice to see the difference.

• 
  @davidhartley91155 ай бұрын

  Recent update. This guy is now dead. His calliper bracket bolts failed on the motorway

• 
  @Nyle955 ай бұрын

  Did you ever make any more videos on another channel?

• 
  @jaynosowsky97085 ай бұрын

  Why would you put a shift boot that doesn't match you interior?? You have white stitching. Factory one looks better to me

• 
  @emanuelesanna3676 ай бұрын

  Bro i have an rt330 stage on st200, and turbosmart valve, the “stututu” is normal o dangerous for the car?

• 
  @jasdevsond6 ай бұрын

  Could’ve taken it through the firewall tbh that’s how I’ve always done them on any car

• 
  @markbateup17216 ай бұрын

  Thanks for the video. Just changed this after someone hit my daughter’s car. Made it easy and saved a few quid which is always nice. Cheers

• 
  @user-im6hd8qh5y7 ай бұрын

  Would of look and been easier with. Bigger gauge that has a ring 😅

• 
  @tinkeringwithcars38757 ай бұрын

  No mention of lining up the lug on the brake pad to the slot in the piston! This us really important!

• 
  @Csmith277 ай бұрын

  Hi bud can you do a video with how you set the 45 degrees angle with the led in please cause when I use mine they just point to the side and not in front so can I have some help please

• 
  @samuelbentley22297 ай бұрын

  Saviour

• 
  @elliot75737 ай бұрын

  Does the crimp cut into and damage the wire a little ?

• 
  @Harryd067 ай бұрын

  does it matter how mnay amps the fuse is for the remote wire?