Well spotted on the hanger weld! Stay safe n look forward to nxt vid. 👍🏻

Loving the stickers, might order myself 1 or 2 :)

Well... I'm on stock exhaust. Have been living with this rattle for a good 5 years or so. Sound is exactly the same! And only now I found a video of someone experiencing the same thing! Gotta check those brackets

@CarRambles

3 жыл бұрын

Brackets and heat shield is my bet :)

wise words ..wise words...Keep safe and keep up the content as best you can

Great video thanks for sharing

Great vid! Agree aswell, if we all just stay inside the quicker this will be over. Car looks super clean! Going to have a go cleaning mine with a DA.

Skint atm, keep reminding me in your videos. I want some stickers soon ✌🏻

@CarRambles

4 жыл бұрын

You got it!

Good content as usual.

Yet again another excellent and well made video!. Thanks for reminding us all to stick to the government rules and stay in, keep everyone safe😬...

I'm running matt black oz formula hlt on my fiST. You see a lot of cars with oz superleggera rims. So i wanted oz for the light weight but be a bit more original. So they were a bit more expensive but i realy love them.

@CarRambles

4 жыл бұрын

I'm thinking trofeo 4 (think that's the name )

@kevinghijs7330

4 жыл бұрын

@@CarRambles looks nice! Something you don't see everywhere. My previous rims were jr11, you see them everywhere. Even from other brands that have the exact same design. I didn't like to go to a car meeting anymore just to see 10 people with the same rim as me 😅

@kevinghijs7330

4 жыл бұрын

@@CarRambles just try to go for a 7,5 inch width and a lower offset. Let's the rim come closer to the outside of the fender, looks way better then standard wheel. I'm running 7,5 and 38 offset.

I looking for rims, too. I am Fall in love with Brock B39 😉

I’ve got a rattle but only after accelerating at lower rpm. It’s so annoying. I’ve changed the crossover pipe because it was rubbing on the brake pipe but it’s still doing it.

@CarRambles

3 жыл бұрын

Well that sounds bad?

Hi fella, great content. Was hoping for a bit of advice. My bonnet sits lower one side than the other, it's not a massive amount, but visible to me. The black adjustable bonnet bumps aren't helping, and a mate reckons the bonnets has been off at one point. Is it something easily sorted by loosening and adjusting the screws on the bonnet? As far as I can tell, the car is honest, nothing on an advanced hpi check. It was owned by a ford technician, so I think the car was modded and returned to near standard before I bought it, it had a symposer delete and a few mountune pipes on it. Now running a Stage 1 until the world gets better and then I will stage 2 it.

@CarRambles

4 жыл бұрын

Thank you. You can adjust the bonnet at the part where it connects, easy enough to do, you'll see a bolt/nut, undo it to the point you can pull the bonnet up/down. It has a small amount of adjustment on it :) You can do it I believe :) look for dark ice design bonnet prop video. Pretty sure they show how to adjust the bonnet up and down in that video

@maciekthepole

4 жыл бұрын

@@CarRambles Cheers fella! It needs like a couple of mm adjustment, a normal person wouldn't mind, but hey, we aren't normal people!!🤣🍻

@CarRambles

4 жыл бұрын

I mean my whole front bumper is sagging off my car. I've now learnt to accept it aha

@jackg5808

4 жыл бұрын

Theres also a slightly common issue caused by wind, the bonnet is surprisingly easily bent. I actually just rebend my bonnet today. Get a block of wood and put it under the bonnet where the latch in the centre comes down so it sits raised up, then just gently lean on the side that needs to come down and it'll sort it out

@carrambles stay safe mitch hopefully meet up soon 👌🤞Definitely need a CR sticker on my fez

@CarRambles

4 жыл бұрын

Get it done dude, they are reducing in numbers fast aha

Stick a rubber washer in there.

@CarRambles

4 жыл бұрын

But... The welds broken.....

Hi, I’m in the same position, refurb or new wheels 🤔 new wheels have to be bigger or wider or what’s the point, yea? I think the Bola B10 or the similar Fifteen52 Tarmac wheels look awesome on the Fez and are super easy to clean lol. Both come in 7.5” instead of the 7” standard wheel. I found the Tarmacks quoted at 10.3kg and the Bolas at 9.45kg against the standard wheel at 10.2Kg so the Bolas win out again here but I seen an American KZreadr weigh the Tarmacks and they came out lighter than standards! So if weight is a consideration then some serious home work is required. If anyone has real life measurements of these or any wheels they have please post. Can’t weight to see what you get, good luck 😉

@CarRambles

4 жыл бұрын

I do wonder what kind of difference rotational mass makes.. i.e lighter or heavier wheels...

@kevbone4809

4 жыл бұрын

Car Rambles hi ya. I was watching a video on the Living Life Fast KZread channel and he reckons that light wheels transformed the way an M3 felt and handled, in a good way. I’ve seen your track day vids and I’m guessing you’ve got the bug lol, so perhaps light wheels is something to consider. Get some advice first though. Me, I think I’d go for looks with weight as a consideration, possibly. Good luck dude 🙂

Yet another shitty Miltek Exhaust, every person I've met with a Miltek never has anything good to say about it. I used to have one but got it removed for a custom one in the end. Fitment, leaks was my constant battle :( Nice video though man!

@CarRambles

4 жыл бұрын

:/ I love my miltek, its just cracked a small weld on a hanger. Youve made me sad aha.

Heat shield

@CarRambles

4 жыл бұрын

Umm