I did my decat the other day mate, messaged you on insta about it haha, all done and am loving it, think a comparison video would be great.
@waynerountree92844 жыл бұрын
Great content car looking mint thanks for sharing
@tom_trs_clarke36414 жыл бұрын
Quality welding on the milltek exhaust! I had the same issue but with my backbox hanger were the thread came completely loose!
@cseasy-ql5wn4 жыл бұрын
Im looking forward to the decat vs sports cat video as i am very interested in getting a new cat. Was leaning more toward the sports cat.
@CarRambles
4 жыл бұрын
Sports cat is 100% the right choice. That way you can get an MOT and I really can't see there being a big power difference
@kevinghijs73304 жыл бұрын
For that bar in the back you mentioned. I have a DNA strut bar with tie rods in the boot. It's nice looking and doesn't affect the space in the back alot. Especially if you don't put the seats down
@CarRambles
4 жыл бұрын
Could you send me a pic :)
@kevinghijs7330
4 жыл бұрын
@@CarRambles i will send you on instagram 😉
@Ghrolz4 жыл бұрын
Should have got a mongoose exhaust, quality all the way 😁
@Kenny.1979
Жыл бұрын
Was the Mongoose loud and what was the fitment like. Any rattles or knocking or loss of low down torque due to the 3 inch size?
@markward86914 жыл бұрын
Very interested in a sports cat vs ✌️de-cat✌️Dyno comparison vid. Also I’m running the same milltek system as you with the power flex bushes on the back box only. Mine knocks on the bumper over bumps do you have the same issue? 👍
@CarRambles
4 жыл бұрын
I dont have that issue, could potentially be the middle section needing a small rotation unless your positive it's the tips hitting the bumper
@danodonnell4436
4 жыл бұрын
Mine ended up being a little twisted due to wear was banging over every bump and could see the right side off the tail pipe higher then the left so had it adjusted but not sure why it’s coming lose with only being on for around 3 months
@markward8691
4 жыл бұрын
Thanks for the replies. It definitely knocks on the bumper (over bumps) as it’s a thud rather than a clang sound. I’ll think your right and will rotate the central section 👍
@charlieonion98193 жыл бұрын
Hi just I’ve this annoying rattle at the moment it’s like a rattle sound at low rpm fine when the car is driving thought it was the heatshield but it’s not as it was loose so now it’s been removed at the back box, I’m running a vudu aet downpipe onto a scorpion system has anyone any ideas
@Ireland1034 жыл бұрын
New alloys maybe? car is on point as always
@TT-jr2zw4 жыл бұрын
Mate you will ruin the comfort of this car if you get bucket seats. If it were me the money would be better spent on a ATB diff to enhance the performance and tame the power that you have.
@CarRambles
4 жыл бұрын
Yep sure will aha
@warrengreenland4 жыл бұрын
Nooooooo. Don't do it
@CarRambles
4 жыл бұрын
Aha, I gotta save up first. We are talking future future 😂 probably when this car turns full track only and I have a daily. I always reference you said it's a bad choice and I agree completely.
@warrengreenland
4 жыл бұрын
@@CarRambles completely agree but will do it anyway ! 👀
Пікірлер: 22
The car looks ‘so good’ Great video 🤗 keep safe
I did my decat the other day mate, messaged you on insta about it haha, all done and am loving it, think a comparison video would be great.
Great content car looking mint thanks for sharing
Quality welding on the milltek exhaust! I had the same issue but with my backbox hanger were the thread came completely loose!
Im looking forward to the decat vs sports cat video as i am very interested in getting a new cat. Was leaning more toward the sports cat.
@CarRambles
4 жыл бұрын
Sports cat is 100% the right choice. That way you can get an MOT and I really can't see there being a big power difference
For that bar in the back you mentioned. I have a DNA strut bar with tie rods in the boot. It's nice looking and doesn't affect the space in the back alot. Especially if you don't put the seats down
@CarRambles
4 жыл бұрын
Could you send me a pic :)
@kevinghijs7330
4 жыл бұрын
@@CarRambles i will send you on instagram 😉
Should have got a mongoose exhaust, quality all the way 😁
@Kenny.1979
Жыл бұрын
Was the Mongoose loud and what was the fitment like. Any rattles or knocking or loss of low down torque due to the 3 inch size?
Very interested in a sports cat vs ✌️de-cat✌️Dyno comparison vid. Also I’m running the same milltek system as you with the power flex bushes on the back box only. Mine knocks on the bumper over bumps do you have the same issue? 👍
@CarRambles
4 жыл бұрын
I dont have that issue, could potentially be the middle section needing a small rotation unless your positive it's the tips hitting the bumper
@danodonnell4436
4 жыл бұрын
Mine ended up being a little twisted due to wear was banging over every bump and could see the right side off the tail pipe higher then the left so had it adjusted but not sure why it’s coming lose with only being on for around 3 months
@markward8691
4 жыл бұрын
Thanks for the replies. It definitely knocks on the bumper (over bumps) as it’s a thud rather than a clang sound. I’ll think your right and will rotate the central section 👍
Hi just I’ve this annoying rattle at the moment it’s like a rattle sound at low rpm fine when the car is driving thought it was the heatshield but it’s not as it was loose so now it’s been removed at the back box, I’m running a vudu aet downpipe onto a scorpion system has anyone any ideas
New alloys maybe? car is on point as always
Mate you will ruin the comfort of this car if you get bucket seats. If it were me the money would be better spent on a ATB diff to enhance the performance and tame the power that you have.
@CarRambles
4 жыл бұрын
Yep sure will aha
Nooooooo. Don't do it
@CarRambles
4 жыл бұрын
Aha, I gotta save up first. We are talking future future 😂 probably when this car turns full track only and I have a daily. I always reference you said it's a bad choice and I agree completely.
@warrengreenland
4 жыл бұрын
@@CarRambles completely agree but will do it anyway ! 👀