forgive me if you mentioned it in the video but why start hand rolling instead of in the mixer.
@iKeepITBКүн бұрын
Sick setup would love to see how it turned out haha thanks for posting I learn daily all the way from the #336 #910 salute!!
@iKeepITB2 күн бұрын
I’m in Greensboro tryna learn shoutout to you
@robertrdell88982 күн бұрын
Why not epoxy?
@Tarheel_Pyro2 күн бұрын
You could use that but hot glue is quick to dry, and no mixing.
@Tarheel_Pyro5 күн бұрын
Thanks….
@jakelutz225 күн бұрын
Nice black cat tat! Been following you for a while but never have commented until I just seen that black cat tattoo pretty cool. Keep up the good work and thanks for doing these videos as they greatly help me in my firework building
@Tarheel_Pyro12 күн бұрын
Yes! We adopted Roscoe.
@MattGoodman-vl7th12 күн бұрын
Is the the same Roscoe from Carolina Tiger Rescue (previously Carnivore Preservation Trust)? If so, I grew up litteraly less than a mile from there. The lions roar more, but before they had lions we could hear the Tigers from the back porch frequently. My dad helped upgrade a lot of the fencing over the years. I even got to see Romeo (RIP) try to spray a few people. Awesome place!
@knivesgamingandrecords299914 күн бұрын
Love your videos if you could recommend good easy and cheap comps for cut and pumped stars that preform well and use similar ingredients to each other or use cheap available ingredients or simple prime thank you looking currently at the ruber star system and bp based stars as a starting base what do you recommend
@SandBland23 күн бұрын
whats the reason behind having to let the stars dry before priming?
@Fireworksenthusiasts28 күн бұрын
What is the composition ratio of this formula? Can you explain it
@Ccxknjkk28 күн бұрын
I drink an 8 ball of Coke now I'm stretch and broken while I stare into the endless TOS I slap my diaper with wow whole
@bigpapaj9165Ай бұрын
For making a time fuse spolette should I use regular bp ? And what’s the best charcoal to use . I made some but the time fuse lasted way to long 2” was 9 seconds burn time
@TarheelPyroChannelАй бұрын
I only use commercial time fuse. Never been able to make a dependable fuse. I put strands of black match in the spolette and insert the time fuse.
@bigpapaj9165Ай бұрын
@@TarheelPyroChannel is pyro creations good? I heard pyro builds isn’t that good so I was planning on making my own but I can’t get it down keeps burning to fast or slow
@TarheelPyroChannelАй бұрын
Pyrocreations.com and cannonfuse.com have reliable time fuse.
@bigpapaj9165Ай бұрын
You use granulated for burst charge?
@Tarheel_PyroАй бұрын
No. I use the black powder coated rice hulls.
@Tarheel_Pyro2 ай бұрын
Nope. Purchased from skylighter.
@pyropenguino2 ай бұрын
Make the hemis yourself?
@Vo_d_kontra_o_norMAL2 ай бұрын
You knwon some guy who tryed - Firework bullets ?
@Vo_d_kontra_o_norMAL2 ай бұрын
Unfortunately they are so expensive to buy alot of them - because they are so much co0l i want alot - but there'is to much money needed - i have Not money
@pyropenguino3 ай бұрын
Been wondering how would lift fare inside of a shell to ignite the stars if just a loose break. Say 50-60 grams of both stars and the lift. A good ratio to not just absolutley destroy the stars. Its A mix but mostly 2fa i have from a ton of wasted shells that got crushed and leaked.
@TarheelPyroChannel3 ай бұрын
Smaller shells use mainly BP for the burst. As the shells get larger I use coated rice hulls for the break. Also a touch of a hot prime to help it ignite.
@chaitaliandbideshteach12103 ай бұрын
Sir please share the horse tail composition
@homegrownpyrotechnics70-303 ай бұрын
I wonder if it would make a huge difference in the breaks by using the continuous strip method?
@TarheelPyroChannel3 ай бұрын
I doubt it. I help wrap club built shells using a Wasp machine and have never noticed a difference. It would be near impossible to wet a continuous strip while hand wrapping.
@Smokin_skies3 ай бұрын
Very informative demonstration! I appreciate you covering so many details. Rare to find videos that cover so much. Thank you!
@adolfo35784 ай бұрын
Se pueden hacer todo el proceso a mano como al principio??
@ocean8704 ай бұрын
do you have the files?
@rick50785 ай бұрын
11:50 I bet if you'd use one of those slightly rounded dough scrapers (for making bread), to smooth out that epoxy clay while the machine is running, you'd be able to get the seam to be nearly imperceptible.
@homegrownpyrotechnics70-305 ай бұрын
I hear PVB as the binder works really well for rolling stars. I don't roll to many of my stars but if I did, I would definitely try it.
@firework75165 ай бұрын
Can you put H3, the burst charge you used with sulfur containing stars? I thought chlorates should NEVER come into contact with sulfur. I'm honestly not sure, you're a lot more of an expert than me so that is why I am asking
@Crossfirepyro26 ай бұрын
Good info🔥🔥
@edwinlee7506 ай бұрын
what type of charcoal did you use for the break?
@sergioalvescordeiro94956 ай бұрын
Qual é mais barato, peneira molecular ou sementes de mostarda??
@edwinlee7506 ай бұрын
Looks like you pasted all 10 layers in 1 session. How long did it take to dry and what grade of kraft paper was the gummed tape made out of? 40lb 60lb?
@kevinmax24496 ай бұрын
Veo tus video aun que estén en otro idioma y trato de entender, soy un aficionado a la pirotecnia, pero no consigo tan buenos resultados,me guataria que en algún momento consideraras poner subtitulos en Español 😢.
@Hoatroi1376 ай бұрын
Bạn có thể cho tôi xin công thức bọc nhiệt của hạt star và bắt lửa hạt star nhanh được không??thank you
@user-th8iw5wm2z6 ай бұрын
what will happen if the burstcharge & stars are not tightly compressed inside the shell and rattling?
@atfboi44586 ай бұрын
The stars will shift out of place and you will get a sloppy break.
@user-th8iw5wm2z6 ай бұрын
@@atfboi4458 Thanks for your answer, it will not cause a flowerpot? I Mean will it not explode in the tube because of friction?
@TarheelPyroChannel6 ай бұрын
Nope
@user-th8iw5wm2z6 ай бұрын
@@TarheelPyroChannel Thank you! Now I can light my shell without a doubt
@WildernessMedic6 ай бұрын
SHALE
@Aboood70077 ай бұрын
متابع جديد لك من بلاد اليمن السعيد عربي الجنسيه شكرآ لك ❤😊
@frobr21437 ай бұрын
Could you write down the formula for me?
@vansuhoang46157 ай бұрын
cái này là gì vậy chú
@vansuhoang46157 ай бұрын
chú có thể cho cháu công thức từng loại màu được không vì cháu người Việt chỉ dịch bằng Google dịch không hiểu chú nói
@stumccabe8 ай бұрын
Excellent video. Thanks.
@Juliansa5378 ай бұрын
Glad to see your videos again. Do you build cylinder shells?
@homegrownpyrotechnics70-308 ай бұрын
You said Magnalium is 5% magnesium and 95% aluminum? I thought it was 50/50 no?
@TarheelPyroChannel8 ай бұрын
Id have to go back and see what I said, but yes it is 50/50 mixture
@frank70278 ай бұрын
I launching a mans ashes with 6" shells, my shells weight 48 oz, would 5 oz of black powder be a good lift amount?
@TarheelPyroChannel8 ай бұрын
Yes. That should reach a good height.
@lchris57098 ай бұрын
So? You haven't shown us anything.
@Lynda-hm1cm8 ай бұрын
Then make it!!!! Tell us what's in it!!!
@TarheelPyroChannel8 ай бұрын
Potatoes, onions, green peas, Lima beans, cream corn, stewed tomatoes, bbq pork, shredded chicken, garlic, liquid smoke.
@homegrownpyrotechnics70-308 ай бұрын
Be careful with that Barium! Gives me the shit's every time! 🤢😂
@Crossfirepyro28 ай бұрын
Very nice
@GodLover20049 ай бұрын
Sir please give more information throw these videos and continue gives new more videos.
@poconopyro1899 ай бұрын
Love watching your videos, super informative! I hope to one day have the space to be able to build my own shells!
Пікірлер
forgive me if you mentioned it in the video but why start hand rolling instead of in the mixer.
Sick setup would love to see how it turned out haha thanks for posting I learn daily all the way from the #336 #910 salute!!
I’m in Greensboro tryna learn shoutout to you
Why not epoxy?
You could use that but hot glue is quick to dry, and no mixing.
Thanks….
Nice black cat tat! Been following you for a while but never have commented until I just seen that black cat tattoo pretty cool. Keep up the good work and thanks for doing these videos as they greatly help me in my firework building
Yes! We adopted Roscoe.
Is the the same Roscoe from Carolina Tiger Rescue (previously Carnivore Preservation Trust)? If so, I grew up litteraly less than a mile from there. The lions roar more, but before they had lions we could hear the Tigers from the back porch frequently. My dad helped upgrade a lot of the fencing over the years. I even got to see Romeo (RIP) try to spray a few people. Awesome place!
Love your videos if you could recommend good easy and cheap comps for cut and pumped stars that preform well and use similar ingredients to each other or use cheap available ingredients or simple prime thank you looking currently at the ruber star system and bp based stars as a starting base what do you recommend
whats the reason behind having to let the stars dry before priming?
What is the composition ratio of this formula? Can you explain it
I drink an 8 ball of Coke now I'm stretch and broken while I stare into the endless TOS I slap my diaper with wow whole
For making a time fuse spolette should I use regular bp ? And what’s the best charcoal to use . I made some but the time fuse lasted way to long 2” was 9 seconds burn time
I only use commercial time fuse. Never been able to make a dependable fuse. I put strands of black match in the spolette and insert the time fuse.
@@TarheelPyroChannel is pyro creations good? I heard pyro builds isn’t that good so I was planning on making my own but I can’t get it down keeps burning to fast or slow
Pyrocreations.com and cannonfuse.com have reliable time fuse.
You use granulated for burst charge?
No. I use the black powder coated rice hulls.
Nope. Purchased from skylighter.
Make the hemis yourself?
You knwon some guy who tryed - Firework bullets ?
Unfortunately they are so expensive to buy alot of them - because they are so much co0l i want alot - but there'is to much money needed - i have Not money
Been wondering how would lift fare inside of a shell to ignite the stars if just a loose break. Say 50-60 grams of both stars and the lift. A good ratio to not just absolutley destroy the stars. Its A mix but mostly 2fa i have from a ton of wasted shells that got crushed and leaked.
Smaller shells use mainly BP for the burst. As the shells get larger I use coated rice hulls for the break. Also a touch of a hot prime to help it ignite.
Sir please share the horse tail composition
I wonder if it would make a huge difference in the breaks by using the continuous strip method?
I doubt it. I help wrap club built shells using a Wasp machine and have never noticed a difference. It would be near impossible to wet a continuous strip while hand wrapping.
Very informative demonstration! I appreciate you covering so many details. Rare to find videos that cover so much. Thank you!
Se pueden hacer todo el proceso a mano como al principio??
do you have the files?
11:50 I bet if you'd use one of those slightly rounded dough scrapers (for making bread), to smooth out that epoxy clay while the machine is running, you'd be able to get the seam to be nearly imperceptible.
I hear PVB as the binder works really well for rolling stars. I don't roll to many of my stars but if I did, I would definitely try it.
Can you put H3, the burst charge you used with sulfur containing stars? I thought chlorates should NEVER come into contact with sulfur. I'm honestly not sure, you're a lot more of an expert than me so that is why I am asking
Good info🔥🔥
what type of charcoal did you use for the break?
Qual é mais barato, peneira molecular ou sementes de mostarda??
Looks like you pasted all 10 layers in 1 session. How long did it take to dry and what grade of kraft paper was the gummed tape made out of? 40lb 60lb?
Veo tus video aun que estén en otro idioma y trato de entender, soy un aficionado a la pirotecnia, pero no consigo tan buenos resultados,me guataria que en algún momento consideraras poner subtitulos en Español 😢.
Bạn có thể cho tôi xin công thức bọc nhiệt của hạt star và bắt lửa hạt star nhanh được không??thank you
what will happen if the burstcharge & stars are not tightly compressed inside the shell and rattling?
The stars will shift out of place and you will get a sloppy break.
@@atfboi4458 Thanks for your answer, it will not cause a flowerpot? I Mean will it not explode in the tube because of friction?
Nope
@@TarheelPyroChannel Thank you! Now I can light my shell without a doubt
SHALE
متابع جديد لك من بلاد اليمن السعيد عربي الجنسيه شكرآ لك ❤😊
Could you write down the formula for me?
cái này là gì vậy chú
chú có thể cho cháu công thức từng loại màu được không vì cháu người Việt chỉ dịch bằng Google dịch không hiểu chú nói
Excellent video. Thanks.
Glad to see your videos again. Do you build cylinder shells?
You said Magnalium is 5% magnesium and 95% aluminum? I thought it was 50/50 no?
Id have to go back and see what I said, but yes it is 50/50 mixture
I launching a mans ashes with 6" shells, my shells weight 48 oz, would 5 oz of black powder be a good lift amount?
Yes. That should reach a good height.
So? You haven't shown us anything.
Then make it!!!! Tell us what's in it!!!
Potatoes, onions, green peas, Lima beans, cream corn, stewed tomatoes, bbq pork, shredded chicken, garlic, liquid smoke.
Be careful with that Barium! Gives me the shit's every time! 🤢😂
Very nice
Sir please give more information throw these videos and continue gives new more videos.
Love watching your videos, super informative! I hope to one day have the space to be able to build my own shells!
Thanks! I appreciate it.
Old school luxury