Whats the model of the rockford fostgate speakers are you using?
@projectkarr9 сағат бұрын
@@cobytheminischnauzer I used the Rockford Fosgate m1 6.5” speakers. Here’s a link: amzn.to/3Y3RFQm
@stansbruv316919 сағат бұрын
Nice work bruv!
@mrtrader46282 күн бұрын
Hey this is not for sale anymore can anyone tell me what SKU is for this module? Husky stop making them with two power rails so I'm trying from one of last years box. Can you please put the sku here.
@philodox75992 күн бұрын
15;15 HAHAHAHAAHHAAHA " hey it didn't get stuck that time"
@solexxx85884 күн бұрын
Batteries aren't rated for MPH. They are rated for discharge current. The BMS in the battery has overcurrent disconnect built in the protect the cells. It can most likely handle 400 amps for 5 seconds or so. The BMS will also disconnect the battery on high temperature so should be safe. 2 of these batteries are still lighter than lead acid at 48 volts and would give you 210 amp/hrs. so tons of range at a very good price and double the amps for extream service. The package is not as nice but is IP68 waterproof rated.
@hashtagjustadad51104 күн бұрын
That’s freakin bad ass!
@sirmashington92058 күн бұрын
Flex head anything torture testing is brutal. If you do this again, that beeping and tone has got to go! Sounds like a smoke alarm in headphones
@alcerz98417 күн бұрын
Say goodbye to these teltons no longer available.
@alcerz98417 күн бұрын
China gearwrench is trash
@alcerz98417 күн бұрын
Why no icon?
@rustyoldman196617 күн бұрын
What's the Body Wiring and Everything cost..
@jeremiesmith359725 күн бұрын
Addicted! Rockford Fosgate way to go!
@MrSymbolic7Ай бұрын
How many batteries did that replace ? , I have 6 Lead Acid deep cycle batteries in a Club Car
@projectkarrАй бұрын
It replaces a standard 48v lead acid pack so it should be very similar in performance to your lead acid
@user-gh5if5oo2fАй бұрын
Where's the 2024 version Or the 243 gearwrench set
@JositooooАй бұрын
When I was 18 and moved away from home, my big brother gave me my first tool set. I use it a lot and think of him every time I do. Only took me another 20 years but I just bought my first house and use it now more than ever 😂
@jordanmaus2621Ай бұрын
@Project Karr - Did you use 2014+ rocker panels with the Storm body kit? Only ones I've found on the internet for pre 2014 EZGOs are the diamondplate ones or direct replacements that have the chrome inlay piece like you originally had.
@projectkarrАй бұрын
Hmm I’m honestly not sure, but I have the same rockers on my 1999 and 2018 carts. I believe they are the 2014+ gtw brand.
@chrisginocАй бұрын
Are those batteries NMC or LFP?
@jarongulla3211Ай бұрын
Looking forward to the next vid! Where did you order the dash from? Did you have to buy the cup holder inserts and the decorative trim pieces separate?
@projectkarrАй бұрын
I believe I ordered the dash from buggies unlimited. It does come with the trim and cup holders. There’s a ton of colors to choose from
@09martin04Ай бұрын
What make is that cart. I love the front end
@projectkarrАй бұрын
It’s an Ezgo txt with a madjax storm body kit
@FoScoJoАй бұрын
FYI: As of right now, the Craftsman and Gearwrench sets linked to in the description are both going for $320 but the Pittsburgh is still $200 (and at an upcoming HF parking lot sale going for $170).
@cavyboy99Ай бұрын
Only thing i don't like is the shallow middle drawers. How deep are they exactly
@jamison74Ай бұрын
Because 3/4 IS 19mm 🤦🏻♂️
@gtcam723Ай бұрын
In that GW set, I’d swap the ratchets out. The 3/8 I’d replace with the 90t compact head from them. That Dewalt set missing a 10mm is the single dumbest skip I’ve ever seen. The 14mm skipped in a Kobalt set I have is the runner up to that. I have one of the dark chrome Craftsman ratchets and it has the heaviest back drag of any single 3/8 or 1/2 ratchet I’ve ever encountered.
@jibboom2112Ай бұрын
Navitas 5k? If I want 50mph with 18" tires will I be over reving the motor? rpm's?
@jarongulla3211Ай бұрын
Do you know what year EZGO upgraded their rack and pinion?
@projectkarrАй бұрын
Should be 2001+
@jarongulla3211Ай бұрын
@@projectkarr Thanks! Love the build vids.
@jibboom2112Ай бұрын
why not reduce from the full 72v? what are the pro's and con's? Thanks for the video's
@projectkarrАй бұрын
I don’t believe I can reduce the voltage but I’m able to change amp output on the Navitas app or with the on the fly controller. When I’m driving through neighborhoods I have everything turned way down.
@therustedsouth2599Ай бұрын
We have a club car precedent. It is all stock except we had the speed code 4 unlocked. Will the LiTime 48v 60ah battery be sufficient?? We use this cart at the beach and ride around daily with 2 adults and grandbabies. Also we want to install one in our farm cart that is just all stock. Thank you!
@jonquis07Ай бұрын
I want the craftsman 216 peices. I shoulda bought it last year bc now i need a tool set
@lawn2learnАй бұрын
One wheel peel love it 😂
@dustinoutlaw9453Ай бұрын
this gearwrench set is now over 300 dollars... like 320 i think it was, looked it up earlier today... Obidenomics ladies an gentleman
@mr.ssswagg6617Ай бұрын
I Love Harbor Freight. Here's My Set up. All Harbor Freight! kzread.info/dash/bejne/faqkvNRsorK2f6Q.htmlsi=lys3YjiKzDFB75tv
@MrKillerpumpkinАй бұрын
I've had tekton bits and neiko bits. NEIKO WAS HORRIBLE. TEKTON STILL ALIVE 3 YEARS LATER. They not from the same factory, they used the same tools to make the tools... but they are not the same factory. Tools are used to make tools. Better people make better tools with those same tools.
@Ehtizan-Editor-0012 ай бұрын
Hey Project Karr, I just watched your video and I must say that it was really informative and well-made. I was wondering if I could help you edit your videos and repurpose your long videos into highly engaging shorts? I can also make high CTR thumbnails for your channel
@stephengilstrap2 ай бұрын
What is that light on the OTF flashing? I have the same Navitas 5Kw/600A setup and Ive never seen that. I have a Bigbattery Husky 48v 103Ah (discontinued now) single battery and I get about 36mph top speed on flat road. I get about 40 miles on a flat road with average 25mph or less.
@Transphoenixbiker2 ай бұрын
I’m 1000% gonna copy this when I finally find the cash todo so
@sandtuck392 ай бұрын
Made in China
@steves74582 ай бұрын
Hey question for you. I have the Eagle batteries as well. When you charge yours what is the voltage cut off? Both of mine cut off at 55 volts. I feel there leaving amp hours on the table. I dont get 30 amp hours on each battery. I like to see these cut off some where in the 57 volt range. Wish they had bluethooth to see cell balance.
@brianscarberry7872 ай бұрын
Outstanding build! But even better video! Thank you. Cant wait to watch more!!!!!
@simpleton81482 ай бұрын
If you got to put a pipe on any wrench you got the wrong tool for the job. I see a lot of these breaking point videos and most ratchets even cheap ones would work in most environments including professional ones. So it comes down to longevity, fatigue,comfort, flexibility and wear. Not just breaking strength. And let’s face it Overseas stuff is getting super high quality. And our youth has no problem buying it. Us old guys who didn’t buy overpriced tool truck stuff always looked for cheaper options in the US made market. But many of those companies have been mismanaged or failed to innovate relying only on brand recognition. And now Taiwan and others are cleaning their clocks if not outright purchasing the companies. What did Lee Iacocca say? Lead follow or get out of the way.
@craigdave32662 ай бұрын
I love all three tool box except texton no half of inch for the price 😂
@Ariztid2 ай бұрын
Yup! Totally gonna do this.
@Kolsch112 ай бұрын
I had a set like the Gearwrench, it was a kobalt set, i loved it till the box broke and it has been a nightmare since. Because of the case im leaning towards the Pittsburgh just in hopes of avoiding the same issue in the future
@GregAbe2 ай бұрын
would you review kolbald, Klein, proto or snap on combo sets
@goldenlife98562 ай бұрын
FYI, putting this on a E-Z-GO Be very careful going really fast. I put it on a neighbor's cart and over 42 it started to get death wobble because of how the front is mounted on semi-eliptical springs. On my Club Car even at a speed starting with a 5.....it's still stable
@Mikey-wf9py2 ай бұрын
Even the flexhead ratchet is floppy... Disappointing
@lf23342 ай бұрын
This is a great setup for 99% of homeowners. I don't think the tool chest is even necessary, but it is cool and does make organizing easier. Harbor Freight really is the best place to get tools for 99% of people. Let's say my $7 set of Pittsburgh screwdrivers goes bad after... 10 years of occasional use... just buy another set. Why buy a $50-$100 set that may or may not last longer? Good choices!
@Wilsonwillfixit2 ай бұрын
I’m glad I get to see you do all this because I’m way too broke. Super jealous awesome setup.
@TRUTH4U2NO2 ай бұрын
Listen SALLY your hands SAY YOU WORK AT STARBUCKS. Why u buying tools? Those girly hands have never seen manual labor. Whens your knitting video?
@projectkarr2 ай бұрын
Kitting and hand care comes out next Thursday, make sure you’re subscribed so you don’t miss out
@BombaBVI2 ай бұрын
Man, you did a lot of good work on that foam!
@setsailmars2 ай бұрын
Tools were good, but the box is a piece of crap...... first handle came off, all tools spilled out. Next the top lid latches broke right off. So now I have to carry by inset handles on side. Now the side latches if you call it that that holds the drawers in place will not stay closed.
Пікірлер
Whats the model of the rockford fostgate speakers are you using?
@@cobytheminischnauzer I used the Rockford Fosgate m1 6.5” speakers. Here’s a link: amzn.to/3Y3RFQm
Nice work bruv!
Hey this is not for sale anymore can anyone tell me what SKU is for this module? Husky stop making them with two power rails so I'm trying from one of last years box. Can you please put the sku here.
15;15 HAHAHAHAAHHAAHA " hey it didn't get stuck that time"
Batteries aren't rated for MPH. They are rated for discharge current. The BMS in the battery has overcurrent disconnect built in the protect the cells. It can most likely handle 400 amps for 5 seconds or so. The BMS will also disconnect the battery on high temperature so should be safe. 2 of these batteries are still lighter than lead acid at 48 volts and would give you 210 amp/hrs. so tons of range at a very good price and double the amps for extream service. The package is not as nice but is IP68 waterproof rated.
That’s freakin bad ass!
Flex head anything torture testing is brutal. If you do this again, that beeping and tone has got to go! Sounds like a smoke alarm in headphones
Say goodbye to these teltons no longer available.
China gearwrench is trash
Why no icon?
What's the Body Wiring and Everything cost..
Addicted! Rockford Fosgate way to go!
How many batteries did that replace ? , I have 6 Lead Acid deep cycle batteries in a Club Car
It replaces a standard 48v lead acid pack so it should be very similar in performance to your lead acid
Where's the 2024 version Or the 243 gearwrench set
When I was 18 and moved away from home, my big brother gave me my first tool set. I use it a lot and think of him every time I do. Only took me another 20 years but I just bought my first house and use it now more than ever 😂
@Project Karr - Did you use 2014+ rocker panels with the Storm body kit? Only ones I've found on the internet for pre 2014 EZGOs are the diamondplate ones or direct replacements that have the chrome inlay piece like you originally had.
Hmm I’m honestly not sure, but I have the same rockers on my 1999 and 2018 carts. I believe they are the 2014+ gtw brand.
Are those batteries NMC or LFP?
Looking forward to the next vid! Where did you order the dash from? Did you have to buy the cup holder inserts and the decorative trim pieces separate?
I believe I ordered the dash from buggies unlimited. It does come with the trim and cup holders. There’s a ton of colors to choose from
What make is that cart. I love the front end
It’s an Ezgo txt with a madjax storm body kit
FYI: As of right now, the Craftsman and Gearwrench sets linked to in the description are both going for $320 but the Pittsburgh is still $200 (and at an upcoming HF parking lot sale going for $170).
Only thing i don't like is the shallow middle drawers. How deep are they exactly
Because 3/4 IS 19mm 🤦🏻♂️
In that GW set, I’d swap the ratchets out. The 3/8 I’d replace with the 90t compact head from them. That Dewalt set missing a 10mm is the single dumbest skip I’ve ever seen. The 14mm skipped in a Kobalt set I have is the runner up to that. I have one of the dark chrome Craftsman ratchets and it has the heaviest back drag of any single 3/8 or 1/2 ratchet I’ve ever encountered.
Navitas 5k? If I want 50mph with 18" tires will I be over reving the motor? rpm's?
Do you know what year EZGO upgraded their rack and pinion?
Should be 2001+
@@projectkarr Thanks! Love the build vids.
why not reduce from the full 72v? what are the pro's and con's? Thanks for the video's
I don’t believe I can reduce the voltage but I’m able to change amp output on the Navitas app or with the on the fly controller. When I’m driving through neighborhoods I have everything turned way down.
We have a club car precedent. It is all stock except we had the speed code 4 unlocked. Will the LiTime 48v 60ah battery be sufficient?? We use this cart at the beach and ride around daily with 2 adults and grandbabies. Also we want to install one in our farm cart that is just all stock. Thank you!
I want the craftsman 216 peices. I shoulda bought it last year bc now i need a tool set
One wheel peel love it 😂
this gearwrench set is now over 300 dollars... like 320 i think it was, looked it up earlier today... Obidenomics ladies an gentleman
I Love Harbor Freight. Here's My Set up. All Harbor Freight! kzread.info/dash/bejne/faqkvNRsorK2f6Q.htmlsi=lys3YjiKzDFB75tv
I've had tekton bits and neiko bits. NEIKO WAS HORRIBLE. TEKTON STILL ALIVE 3 YEARS LATER. They not from the same factory, they used the same tools to make the tools... but they are not the same factory. Tools are used to make tools. Better people make better tools with those same tools.
Hey Project Karr, I just watched your video and I must say that it was really informative and well-made. I was wondering if I could help you edit your videos and repurpose your long videos into highly engaging shorts? I can also make high CTR thumbnails for your channel
What is that light on the OTF flashing? I have the same Navitas 5Kw/600A setup and Ive never seen that. I have a Bigbattery Husky 48v 103Ah (discontinued now) single battery and I get about 36mph top speed on flat road. I get about 40 miles on a flat road with average 25mph or less.
I’m 1000% gonna copy this when I finally find the cash todo so
Made in China
Hey question for you. I have the Eagle batteries as well. When you charge yours what is the voltage cut off? Both of mine cut off at 55 volts. I feel there leaving amp hours on the table. I dont get 30 amp hours on each battery. I like to see these cut off some where in the 57 volt range. Wish they had bluethooth to see cell balance.
Outstanding build! But even better video! Thank you. Cant wait to watch more!!!!!
If you got to put a pipe on any wrench you got the wrong tool for the job. I see a lot of these breaking point videos and most ratchets even cheap ones would work in most environments including professional ones. So it comes down to longevity, fatigue,comfort, flexibility and wear. Not just breaking strength. And let’s face it Overseas stuff is getting super high quality. And our youth has no problem buying it. Us old guys who didn’t buy overpriced tool truck stuff always looked for cheaper options in the US made market. But many of those companies have been mismanaged or failed to innovate relying only on brand recognition. And now Taiwan and others are cleaning their clocks if not outright purchasing the companies. What did Lee Iacocca say? Lead follow or get out of the way.
I love all three tool box except texton no half of inch for the price 😂
Yup! Totally gonna do this.
I had a set like the Gearwrench, it was a kobalt set, i loved it till the box broke and it has been a nightmare since. Because of the case im leaning towards the Pittsburgh just in hopes of avoiding the same issue in the future
would you review kolbald, Klein, proto or snap on combo sets
FYI, putting this on a E-Z-GO Be very careful going really fast. I put it on a neighbor's cart and over 42 it started to get death wobble because of how the front is mounted on semi-eliptical springs. On my Club Car even at a speed starting with a 5.....it's still stable
Even the flexhead ratchet is floppy... Disappointing
This is a great setup for 99% of homeowners. I don't think the tool chest is even necessary, but it is cool and does make organizing easier. Harbor Freight really is the best place to get tools for 99% of people. Let's say my $7 set of Pittsburgh screwdrivers goes bad after... 10 years of occasional use... just buy another set. Why buy a $50-$100 set that may or may not last longer? Good choices!
I’m glad I get to see you do all this because I’m way too broke. Super jealous awesome setup.
Listen SALLY your hands SAY YOU WORK AT STARBUCKS. Why u buying tools? Those girly hands have never seen manual labor. Whens your knitting video?
Kitting and hand care comes out next Thursday, make sure you’re subscribed so you don’t miss out
Man, you did a lot of good work on that foam!
Tools were good, but the box is a piece of crap...... first handle came off, all tools spilled out. Next the top lid latches broke right off. So now I have to carry by inset handles on side. Now the side latches if you call it that that holds the drawers in place will not stay closed.