Just fixed my 650 Penn... it was frozen solid, pulled it apart using your vid, cleaned the parts, small screws were a pain to put back, but done ... your channel ....excellent work ... greetings from Australia

@2ndChanceTackle

Жыл бұрын

Greetings and thanks for the note. Glad to have helped give your 650 a 2nd Chance - Best wishes - Dennis

Just bought this reel in Australia for a boat rod. Thankyou for this vid mate I appreciate it👍

@2ndChanceTackle

3 жыл бұрын

Glad I could help. Thanks for the note! Best wishes from the USA - Dennis

I’ve been looking at several of your videos on reel strip down and maintenance which has inspired me to give it a go on a couple of Spinfishers I use mostly for surf fishing. Your videos are such a great help. 👍

@2ndChanceTackle

4 жыл бұрын

Thanks for watching and thanks for the kind words. Remember to use a parts tray and take pictures! Please stay tuned for more to come - Dennis

Hey Dennis thanks for this video my spinfisher is about 15 years old and I have never serviced any real before. I didn't even know if I could do it but after watching your video I just did and it works great. I'm stuck in the house because of the Corona virus. so I bought a cleaning kit and I'm going to try to fix my other reels that were my wife's father's. some good old Penn reels and an old Shimano Calcutta. watching your videos I think I could do it thanks.

@2ndChanceTackle

4 жыл бұрын

Hi Danny - I didn't see this before the other one on reels to use for Sturgeon. Do ahead and tune up your Calcutta, find a pole and take that one fishing! It will be a great reel to learn with...and catch fish too! Best wishes - Dennis

@dannymcdonald286

4 жыл бұрын

Sounds great Dennis I'll watch your Calcutta video so I can do it. I might be missing a part though but I'll see what's up hopefully I can fix it.

Thank you. I have put all my Chinese Penns back in the boxes and have gobbled up some 700 series greenies on Ebay for my go to saltwater reels. That ssm gearing was the last of the good gearing that Penn offered.

Totally Brilliant thank you for sharing

@2ndChanceTackle

2 жыл бұрын

Glad you enjoyed it. Thanks for the note and for watching - Dennis

Many thanks for that video

@2ndChanceTackle

2 жыл бұрын

My pleasure. Thanks for the note and for watching - Dennis

Thanks for vid mate helped a lot

@2ndChanceTackle

3 жыл бұрын

Glad it helped. Please stay well and stay watching - Dennis

Cross wind block! Thank you.. mines busted Awesome vids keep it up

@2ndChanceTackle

4 жыл бұрын

Thank you. Please stay tuned for more to come - Dennis

Excellent video Dennis...enjoyable and relaxing to watch. I have 2 USA built 4400ss...haven’t used them for almost 20 years since purchasing. What are your thoughts on the build and purpose and would I find a similar build to your current video? My hopes would be a light saltwater use.

@2ndChanceTackle

4 жыл бұрын

I don't have. video on it. I will add it to my list of requests. Thanks for asking, and thanks for watching - Dennis

Enjoyed the video very much. I have a 650SSM. What would make the anti reverse not engage all the time and feel like it skips as well?

@2ndChanceTackle

4 жыл бұрын

That reel uses an anti-reverse clutch, so it is most likely dirt in the bearing or the sleeve that it engages with that is causing it to skip or not hold - Sounds like it needs to be cleaned - Dennis

@user-wh5yh3wz4m

4 жыл бұрын

I cleaned the real like you did in the video and cleaned the clutch. Works great now. Thanks again.

Hi Dennis, I've tried to service my old penn 950ssm like in the video but when I put it back together the gears were not meshing properly. I'm pretty sure its the main gear and the gear that goes parallel to the shaft. Any idea on what could cause this and how to fix it? Thanks for the informative video.

@2ndChanceTackle

Жыл бұрын

Those would be the two gears that need to mesh, but you should also check the back of the main gear where it meshes with the oscillation gear. You do not say exactly the problem. Is the case closing and you have gear noise? Check the shim washers on the handle side to make sure they are installed correctly. Is it that you cannot get the case closed? Check the oscillation gear and back of the main. Check how the main seats in the bearing. Do you have the version with the screw that goes in the non-handle side bearing into the main gear? Check to see that is installed properly - Dennis

@moite2665

Жыл бұрын

@@2ndChanceTackle Hi I'm back! Thanks for the help, with much fiddling over many spare days it has been fixed. I still don't know what was wrong with it but the original problem was that there was gear noise and vibrations when cranking. It runs smoother now but not perfect, which is good enough for now. Thanks again for replying to all these comments and helping people even on a 3 year old video.

Thanks for the video, I am servicing this exact reel now and the bail does not flip easily, do you have any videos on that part?

@2ndChanceTackle

2 жыл бұрын

Try a shot of penetrating oil on the spring side of the bail before you do anything. That will free up a dirty or stuck bail. If that is not the fix, it is likely the bail wire is bent. Watch this video kzread.info/dash/bejne/mIB8o5KuhLuuerQ.html it may help with the next step

@scottk27332

2 жыл бұрын

@@2ndChanceTackle I ordered new bails, mine were corroded pretty bad, I'll keep them lubed better from now on!

Can someone with a lot of rod/reel knowledge give me advice? I’m setting up a rig for tarpon, cobia, bull redfish, and sharks. It’s got to be cheap, last, and be a spinning set up. After doing research I decided on a Penn 850ssm, Penn allegiance II heavy, fast action 1 piece 7ft rod, 65lb braided with 80lb mono liter, and some large swim baits. Total cost is 230$ shipped. Are there better options for the money? Will the penn 850ssm hold up to those bigger fish? Is heavy action enough or should I get the extra heavy rod? Thank you to anyone that replies.

Wish I had one of these. Does Pennstill make the 704Z and the 706Z in ‘Pennsylvania? I know they started making them again in 2013. I have both of those that I got back in the late 70s. Super video.

@2ndChanceTackle

4 жыл бұрын

That is a good question. I don't know if they still make anything in Philadelphia. I will need to look into it. Penn got consolidated into Pure Fishing and moved most production to China around 2005.I think their headquarters is South Carolina with another location in Spirit Lake, Iowa. I do not see Philadelphia in their contact information. My guess would be that the newly released retro Spinfisher are also made in China.

@christopherjenkins2373

4 жыл бұрын

@@2ndChanceTackle it is a shame that Penn had to do that. I have a Penn 104 in addition to the Zs and greenies but nothing more modern than that.

@2ndChanceTackle

4 жыл бұрын

Penn didn't give up the US manufacture until 2005, but quality definitely slipped as they were sold and resold a few times. Some of their 1990 reels just used the name and were downright awful - I'm thinking of the Powergraph and Roddy by Penn as examples when they were owned by Master. I think they have righted the ship under Pure fishing and are starting to innovate again as opposed to milking the brand name. I plan on doing a company history at some point. That 104 was made in Japan in the 1970's. Nice, but the Daiwa 4000C, a competitor at the time, was the better reel in my opinion - Dennis

@christopherjenkins2373

4 жыл бұрын

2nd Chance Tackle I agree about the quality of the Daiwa Silver Series. I love my 7000C! I have a Daiwa Punch 2500 that I am also fond of! I like it better than the Penn 104.

Well engineered and built reel. l noticed there didn't seem to be an anti-reverse switch, dog, or bearing..

@2ndChanceTackle

4 жыл бұрын

This has the anti-reverse clutch that sits under the rotor. There is no over-ride for the clutch. It is alway on. - Dennis

@user-pk4bj8fj4s

Жыл бұрын

@@2ndChanceTackle I enjoy your videos and found this particular reel sitting in a box in my husbands' tool shed. I cleaned it all up but the anti reverse wasn't working. Can you show what that looks like in your videos. Thanks

how do you fix the anti reverse mechanism?

@2ndChanceTackle

Жыл бұрын

You can either replace the dog, of try to improve the performance by pinching the two forks closer together to improve the grip on the ratchet

Hi I have a 950ssm and for some reason the handle has started to back spin but if you move it really slow it locks again. Do you know which part it will be so I can try and order it any help with be amazing thanks.

@2ndChanceTackle

4 жыл бұрын

If you are turning backwards, that would be a dirty or broken anti-reverse clutch. It is part numbers 98c-950 and 117-950. They are available through Mysticparts.com Dennis

@ebonyizzy1134

4 жыл бұрын

Thanks for your help I’ll take it apart and have a look first. You didn’t mention that part in your video so is that inside the part you didn’t take apart?

Hi Denis, this penn is Made in usa?

@2ndChanceTackle

4 жыл бұрын

No. This was one of the first of the Chinese versions of the reel. If it does not say made in the USA, it wasn't. The older versions have the Made in the USA staled on the reel foot - Dennis

@ZampostOk

2 жыл бұрын

@@2ndChanceTackle is there a significant difference specifically in this model? Chinese SSm’s vs USA versions? Big difference?

I just got a Daiwa 7000c, a big, later model Penn spinning reel is next on the list, they go fast when listed

@seymourwrasse3321

Жыл бұрын

I like the simplicity of these older reels

@2ndChanceTackle

Жыл бұрын

Yes - simple and dependable - what could be better?