Пікірлер

• 
  @ElRober97Күн бұрын

  Are u still around mate, I would like to ask if I’m sending the air outside on a window, just opening another window I’m my apartment is enough to avoid creating negative pressure ?

• 
  @okashikami55885 күн бұрын

  hey I love this video and i was able to get it installed but the actual printer doesn't do anything like the UI works but nothing moves any reason did I do something wrong?

• 
  @rafaelalarcon82998 күн бұрын

  I have a question my laser burns for the beguining but the stops it keeps going though like it’s burning but no laser

• 
  @darkflux19 күн бұрын

  so you didn't bother filming how you connected the tubing, the wiring, or the clamps...what was the point of making a video? i mean, ANYBODY can see WHERE things are connected if they own one of these...

• 
  @CKG_3522 күн бұрын

  been a while, how long did this last?

• 
  @wout_vanhims25 күн бұрын

  Thank you so much! Have the same cnc, brand new. Wood is cutting perfectly like the cnc cutter specs recommend. But aluminum is a nightmare. I did a 1mm deep cut with a 10mm cnc mill but the spindle stopped rotating mid program. The 500W motor couldnt handle it. I saw you do 0,25mm passes. Thanks for that

• 
  @MSCNCArtshopАй бұрын

  Hi , great work, is the post still available on your website,

• 
  @user-rb3mv6nl4qАй бұрын

  Omtech makes an antifreeze for glass co2 lasers

• 
  @totaljunk7508Ай бұрын

  I don't see a link...just says here are my perfered glasses...

• 
  @YossyKristyАй бұрын

  great video. I have a problem with laser neje 3 + mac ios 13 + lightburn (trial). I designed a circle but the final result is ouval. where and what should I do to setting this ? thanks

• 
  @angere8Ай бұрын

  Holy cow, I've been doing this manually. I do have a couple issues with this though. You can't make the cylinders that are part of the array any smoother (they are defaulted to 16 sides), and if you make an array with an odd number of components, it will not center correctly with the align tool. They also will not rotate correctly, because the geometric center is not the same as the center of the array for an odd number of components.

• 
  @ronsecord428Ай бұрын

  I have been having issues with OLM3 and getting error messages 8 and 9. Will this update help with those issues? Thanks

• 
  @kamelb4224Ай бұрын

  Thank you!!! You saved my time... That's my 1st week with LB and I was close to give up 😱

• 
  @fransiscorivaldywetik6125Ай бұрын

  Can this tool measure temperatures above 1000 degrees Celsius?

• 
  @ccolletti39Ай бұрын

  I don't have the same file as you show. But when I did try to upload I get an error timeout message

• 
  @bobjoatmon19932 ай бұрын

  Too drawn out, show the damn fan not babble on and on.

• 
  @xuedonghe19852 ай бұрын

  Only rubish.

• 
  @Oxydeme2 ай бұрын

  Trying to sort myself with Core XY, Can't swap pins, can only mod Marlin actually and using old cables that came with the Ender itself, Basically i made a conversion following a printables page ENG by RH3D, but i can't find a way to get my axis to move correctly, I mean i told machine to auto home it tries to get into the back left corner so x0 y235, but, doesn't work correctly

• 
  @Teodoro-kk1vm2 ай бұрын

  Thank you i've got all the information needed.

• 
  @johntomasik15552 ай бұрын

  It's almost impossible to give a real evaluation of a machine without fully understanding how to properly use it. Granted, it's a hobbyists CNC, but still it's important to understand proper set up to really evaluate the capabilities of whatever is being tested. Proper work fixturing, understanding what material is really being used, describing what the machining priorities are (fast? excellent finish?), mill bit diameter, flute count, material, speeds and feeds that are defined by those parameters, lubrication, chip removal, etc....all very important to really test the CNC.

• 
  @RandomSmith2 ай бұрын

  I have never heard of someone using a spirit level to level a 3d print bed before, it doesn't make any sense.

• 
  @jayvaccaro41202 ай бұрын

  I am having a problem with Alarm 3 Reset while in motion.GRBL cannot guarantee position. Lost steps are likely. Rehoming is recommended which I did. ON or near Line 0. Please help!

• 
  @MichaelFaughn2 ай бұрын

  Would be so much better if you could align the ruler with your object by moving the ruler and not the object!

• 
  @asdf71252 ай бұрын

  Nice video, it worked

• 
  @jaysam412 ай бұрын

  when I'm designing anything In Tinkercad i just hit D to drop it to the bed to make sure

• 
  @theinevitable83572 ай бұрын

  Hi im rayen

• 
  @pitbullash2 ай бұрын

  PLA/PETg -------》FTW ❤️

• 
  @jondoe58662 ай бұрын

  You didnt explain how to ground it. sad face

• 
  @sannyassi732 ай бұрын

  That's a lot of passes for cardboard. I've found with my 10 watt diode just focus a few mm closer than normal, run it 100% and bump the speed up and it cuts super clean on one pass. I haven't done your level of experimenting, though I've cut quite a bit of cardboard. Luckily cardboard goes so fast that I usually just babysit it.

• 
  @MileyonDisney3 ай бұрын

  I do not know, but I would think that aligning the second mirror close to the laser, then at the opposite end would be much more precise than measuring against the sheet metal. If the laser burns a hole in the tape in the same spot at both ends, it's aligned. It's all based on where that first mirror is pointing. I am only guessing.

• 
  @MileyonDisney3 ай бұрын

  Thanks for another great video! My house has pex plumbing. So I guess I'm going to have to run a wire to the main water shutoff valve. Is that right?

• 
  @MileyonDisney3 ай бұрын

  Thanks!

• 
  @MileyonDisney3 ай бұрын

  Thanks!

• 
  @MileyonDisney3 ай бұрын

  I am shocked!

• 
  @MileyonDisney3 ай бұрын

  You need to put titanium dioxide on it to get black from the engraving.

• 
  @mymagicsigns3 ай бұрын

  When I get to the grbl folder and click "Open" it simply onpens the folder and does not add it, if on the other hand I put it in a zip, it is adding it, but if I upload it to the arduino Uno and try to run the motors with the UGS app sometimes it works, sometimes it does not, and only for a few secconds, and I get all sorts of erros, missing gcode and other stuff. What am I doing wrong?

• 
  @murraymadness46743 ай бұрын

  When it comes to safety gear, the prices get inflated a huge amount. This applies to racing equipment, a $10 fire extinguisher becomes $100 when it goes into a racecar even though they are essentially identical. There are some differences, that might one $15, but not $100. So the question is always what item is better and what is just over inflated price? btw, how about one just wear an eye patch on one eye, so in the worst case, you still retain vision no matter what.

• 
  @hmdwn3 ай бұрын

  Sooooo, being I can't locally find the SR44+ (and what's the + for?) Will a 357 will in my digital Caliper???

• 
  @harveyinsler58013 ай бұрын

  Hey. Anyone know if the G-codes are still up? THanks.

• 
  @soheylamohtadi4843 ай бұрын

  This is indeed a very powerful tool, my question, would it do the reverse i.e. from STL file to Script?

• 
  @younessid4373 ай бұрын

  Thank you so so so much Bro, min 1:10

• 
  @thetruth76333 ай бұрын

  Very good info!

• 
  @LuisPa2473 ай бұрын

  Wheres the link for the glasses? its blank...

• 
  @LostCloudx43 ай бұрын

  This little fukker work? I have one on a 3018 and my Monport board on my k40 isn't working.... if it works I might be able to temp rig it up

• 
  @billh3083 ай бұрын

  GRBL is completely configurable

• 
  @tjhuntog3 ай бұрын

  i mean. Your bed is level if if the printer is the horizon... Meaning its 100% level to the framing of the printer. lol Different interpretation of the words i suppose.

• 
  @michelemcneil46584 ай бұрын

  What bit did you use… a diamond one?

• 
  @richardbrown22904 ай бұрын

  thanks. tried Kiss and for some reason it does not like the Marlin 2.06 system. Thanks anyway

• 
  @SloppySlots4 ай бұрын

  Garble? GBRL = Gerbil

• 
  @tytus8944 ай бұрын

  Is shhiet