Nice love it man !!!

@DIY3DTECHcom

3 жыл бұрын

Appreciate it!!

which lens holder are you using in this video for your G8?

Does the Air Assist come with the G8 miracle lens

Brilliant video, can I please get the file? What is on the othere side of the tube nossle?

Thanks for the file, I printed it but when I installed it looks like it might hit the rail on the right side when you engrave something that brings the X axis all the way to the edge. Did you have any problems with that?

@DIY3DTECHcom

3 жыл бұрын

it might as I have never covered the entire surface...

The download link on your site doesn't seem to work. The link for the previous model didn't work either. Could you check and see why it won't let us download any give this model a try? Thanks.

@Salmonde_At_Home

3 жыл бұрын

I am having the same issue. The link seems to be missing on their website altogether.

I hate to show my ignorance, but just where do I go to to see the product and how to order it? How about the pump and controls?

I’m about to assemble my 20 watt otur master 2 laser. Got the G8 lens and a light burn camera. Will do the 30days free before purchasing. Sooo, maybe a question or two. The G8 I received, the barrel (?), was not attached to the lens. On the barrel there is one end with a slot (like set up for a screwdriver) other end no slot. Does it matter which end I attach to the lens? And the Teflon tape, I assume it’s put on the end that goes into the main body of the laser? Oh yeah, since I’m old as dirt I also picked up the usb microscope. I’m curious to see if I can get it to cut through some 3mm plywood.

@DIY3DTECHcom

3 жыл бұрын

Yes there is a direction to the lens and that is typically slot side down and yes to the tape entering the body. Also yes to the 3mm ply wood. Note with the plywood is it varies and the glue will be a factor in cutting it. So you might want to try different bands to find the best one,,,

@ph1gm3nt

3 жыл бұрын

Thanks guys, I appreciate your response! Your channel deserves a subscribe, so I’m now officially subscribed.

What air pressure do you use? do you think my airbrush compressor would be ok max 4 bar pressure?

@DIY3DTECHcom

3 жыл бұрын

Thats what I use is an air brush compressor and push about 6psi you don't need or want a lot...

What kind of connector do you use for attaching the silicone tubing to your compressor hose? Thanks!

@DIY3DTECHcom

3 жыл бұрын

I only pump about 6psi so it just pushes on a barb connector on a regulator...

@DeadEyeDetails

3 жыл бұрын

@@DIY3DTECHcom could you please let us know what barb connector you used? Having issues finding the correct one. Thanks!

What size m8 nozzle is best they seem to sell them with 4 different sizes or 4mm in like a 10pack?

@DIY3DTECHcom

3 жыл бұрын

I use an MK-8 0.8mm

Like Ernie Hodge mentioned below the link to download your file does not work.

Hi! I'm going around and around in circles because every link you have listed for the new air assist 3d print (stl file) goes back to the first version. I have already had the first version printed twice, and the laser does not line up with the hole at the bottom which is quite annoying. I think it needs 3 screws instead of 1 to hold the lens properly in alignment with the air assist nozzle. I would really like to print the second version, but every link I have gone to on Thingiverse and KZread lead back to the old file. Please fix!

@DIY3DTECHcom

3 жыл бұрын

They are all correct so not sure the issue your seeing. Suggest downloading from the designstore.diy3dtech.com/

You should start selling these...I WOULD BUY ONE TODAY. i don't do any 3d printing. Can you buy any air assist kits ANYWHERE for my Ortur Laser Master 2? Thanks.

I really need this but do not have a 3d printer. Is there anyone selling them?

@DIY3DTECHcom

3 жыл бұрын

Please check with: www.etsy.com/shop/JohnsRobotArmy

Your Design Store link is not working. I also have not seen any new videos in about a year. Are you OK?

Which nozzle size did you use?

@DIY3DTECHcom

3 жыл бұрын

MK8 0.8 mm Nozzle

Your content is really good, thanks for supporting the community. Your busy hands in the shots are really distracting, suggest you minimize that to keep people focused on your message.

@DIY3DTECHcom

3 жыл бұрын

Thanks for the tips! However my hands are sort of my thing like Ave & This Old Toney :-)

Its crap.... Stock lense has 35mm focus so this airassist is useless

why would you need air assist for such a small laser??? theres no resaon... lol

@DIY3DTECHcom

3 жыл бұрын

You would be foolish not to have one especially on a small laser! An air assist does three things (1) snuffs out fire and especially cutting cardboard you needs this watch my fire video and I can send you many more that happened because I did not have air assist! Second (2) is to clear the smoke from the beam to prevent attenuation of the beam, this makes a huge difference, and (3) clears the kref of ash to allow the beam to strike virgin material as ash is an insulator. See you learned something new today!

@IronMan-yg4qw

3 жыл бұрын

@@DIY3DTECHcom it wont start no fire its to weak of a laser . be serious.

@johnhancock6951

3 жыл бұрын

@@IronMan-yg4qw You have literally no idea what you're talking about... do you? Air assist helps with ANY diode laser, primarily with clearing debris and ash to improve cutting performance. Fires are also a serious issue on paper, cardboard, card stock and soft woods like balsa and basswood. Try harder next time.

@IronMan-yg4qw

3 жыл бұрын

@@johnhancock6951 thats just stupid. air assist dont help with engraving. actually can hurt it. but air is always good to blow away smoke from lens. so if air is npt pointing at focus point then it will help by blowing smoke away. air assist is important for cutting!!

@johnhancock6951

3 жыл бұрын

@@IronMan-yg4qw You should probably reread my comment, specifically this section: "Air assist helps with ANY diode laser, primarily with clearing debris and ash to improve cutting performance." You go on to "debate" me, then confirm my position a few sentences later: "air assist is important for cutting!!" Now, tell me which part of my comment is "stupid", considering you literally just proved my point for me... inadvertently. Seriously, are you even trying at this point?