Custom Cars Hotrods and Fun Drivers of all kinds! I am a host on Hotrod Garage and I enjoy building cars. I also have my own shop and build classic cars for customers.
It's not bad, but obviously it still needs a little work. The front wheels need to get moved forward more, the hood latch needs to be installed, and the bed needs to be color matched. As for the wheels themselves, they hold it up, but there are definitely better wheels out there. Show some of your own projects Lucky.
@robertedwards643822 сағат бұрын
Sweet truck!
@dennisschell5543Күн бұрын
Kool sleeper! 😎
@luckysgarageshowКүн бұрын
Very!
@zambonidriver42Күн бұрын
What did it have for exhaust? It sounded good.
@craigsullivan3982Күн бұрын
That truck looks a lot like Craig 909,s truck
@Robrt32Күн бұрын
It would be a really cool truck with decent rims. Stock steel rims have 3 uses. Jack stand, wrap an air or garden hose around or finishing out a scrap iron load. They should never ever be on anything unless you’re so poor. You just can’t do better. I been that situation but I soon as I could, they were gone.
@darylvoorhees2629Күн бұрын
Lucky, Love your channel. What condenser did you use on your 51 ford pu ? I'm building a 51 Ford pickup and adding AC but can't find a good fit for a condenser. If you have any details it would be appreciated.Thanks
@gingercheyeneКүн бұрын
Nice truck, dip shit of a dude!!
@StringerNews1Күн бұрын
I want one! How much? More than I can afford, I'm guessing. I'll have to take my old F-250 with the 460 as a consolation prize, with half the horsepower if that.
@andhotrodshopКүн бұрын
Raise that shift light up 😂😂😂 oh yeah it’s a customers 😂😂😂 good looking truck, should be a lot of fun 👍🏻🙌🏼🔧🔧🔧 see ya on west in October 🙌🏼👊🏼
@MrR31powerКүн бұрын
Nice would love to see you do a catch up with Tony Angelo if you guy's are on good terms. Miss the old hotrod garage day's.
@geraldbrakefield3874Күн бұрын
worst cookies in the world, always stale and hard as hockey pucks.
@readbtl3838Күн бұрын
Wasn’t a hellkitty
@mr8610Күн бұрын
The speed up tripped me out.
@cantonbailey5980Күн бұрын
I know this is an old video but im looking for some expert advise. Got a 2005 wranger tj right hand drive. The harness is shot. Will a normal left hand drive harness work or is there a special harness? Been looking and cant find anything really except used ones. Thought about pulling it and going wire by wire inspecting but i dont have the free time i think that might entail. Any advise helps thank you!
@luckysgarageshowКүн бұрын
That’s a tough call. These harnesses are vin specific. Every car , every year and every option is a different harness.
@dougmasters38752 күн бұрын
“What we're dealing with here is a complete lack of respect for the law.”
@jerrygaynor43842 күн бұрын
From outside looks like old farm truck. Very cool sleeper!!!
@luckysgarageshowКүн бұрын
It does!
@CraigMaciolek2 күн бұрын
"Right turn Clyde."
@mikeabney12142 күн бұрын
Instead of the crown bump, how about the bumpy crown.
@hedrives2 күн бұрын
"What is up with people who are just idiots?" Bwahahahaha...
@notchbackgta2 күн бұрын
Hot glue, not epoxy
@williambremner90222 күн бұрын
The bed mods and overall posture look spot on. Nice truck!
@luckysgarageshow2 күн бұрын
Thanks 👍
@andybobandy6412 күн бұрын
Feels like that flag is mounted upside-down. The star field should be facing the direction of travel?
@bobwhaley54972 күн бұрын
Might mention the flag code to the owner. I'm sure he doesn't mean to piss on the living breathing nation.
@Novaman662 күн бұрын
Love your HONEST!!! Videos!
@luckysgarageshow2 күн бұрын
I appreciate that!
@StevenMilne-sm4fk2 күн бұрын
Nice rig that.😎
@biglakehotrods3812 күн бұрын
Can you tell me about those gauges? Who makes em. Looking for a set for my build.
@michaelraygoza96642 күн бұрын
LOVE THIS TRUCK
@luckysgarageshow2 күн бұрын
Thank you!
@michaelraygoza96642 күн бұрын
always fun to hear the horror stories of someone else's handy work :)
@luckysgarageshow2 күн бұрын
👊🏻
@user-gc1zn5mn4p2 күн бұрын
Lucky, when it comes to idiots you cannot correct for the stupid factor.
@michael-michaelmotorcycle2 күн бұрын
In the process of building my own Crown Hick. Using a 2008 CVPI & my 1969 Sweptline. I was surprised that the plate CRWNHIC wasn’t already taken, so the DMV issued it to me 😂
@luckysgarageshow2 күн бұрын
That sounds cool 👊🏻
@Dave_Boyer2 күн бұрын
Sweet looking truck! Probably the last thing that I have an urge to buy..
@64Pete2 күн бұрын
We both need a haircut Lucky. ✌ 🇦🇺
@scottr99002 күн бұрын
Maybe some different wheels? But the poverty caps totally have to stay.
@RobertMay2892 күн бұрын
Here's a comment for the Ole algorithm. Cheers Lucky
@luckysgarageshow2 күн бұрын
Thank you!
@DChrls2 күн бұрын
That is a clean install.😀👍
@luckysgarageshow2 күн бұрын
Thank you
@d1mennis2 күн бұрын
I like the jack in the engine compartment, like that jack can lift that truck!
@luckysgarageshow2 күн бұрын
👊🏻
@nickfox32542 күн бұрын
Keep up the great work Lucky!!!
@luckysgarageshow2 күн бұрын
Appreciate that!
@bigbill7092 күн бұрын
Very clean looking install.
@luckysgarageshow2 күн бұрын
Thanks for watching
@bigbill7092 күн бұрын
Nice looking old Ford truck.!!
@luckysgarageshow2 күн бұрын
Super nice
@bigbill7092 күн бұрын
I like the roof flag
@luckysgarageshow2 күн бұрын
America🇺🇸
@Paulster22 күн бұрын
That Coyote sounds awesome ... and I'm a GM guy :o)
@luckysgarageshow2 күн бұрын
Thanks for watching
@Paulster22 күн бұрын
@@luckysgarageshow - TBH Lucky ... you're one of my heros in the automotive world. Keep on keepin' on, bro!
@roywhitman71092 күн бұрын
That Coyote looks right at home under that hood!! 👍 You & Tony really started something with that body swap!! 👏👏
@luckysgarageshow2 күн бұрын
👊🏻👊🏻👊🏻💪🏼💪🏼
@hankfink2 күн бұрын
That's sick. Would love to do that with my Highboy either a Coyote or Godzilla but nothing fancy, just the engine swap.
@luckysgarageshow2 күн бұрын
Thanks for watching!
@johnpurdum81262 күн бұрын
Very nicely executed.
@luckysgarageshow2 күн бұрын
Thanks for watching!
@kimknowles36812 күн бұрын
Not a Ford guy, but i like it.
@luckysgarageshow2 күн бұрын
👊🏻🏁
@sessayan22 күн бұрын
How was the hotdog ?
@luckysgarageshow2 күн бұрын
👊🏻
@RDSAlphard3 күн бұрын
4:09 - I see a Volvo 145 with small bumper!
@ANOCKS3 күн бұрын
Is as a veteran I think it's a little disgraceful to have the American flag as a odds are the owner of this vehicle never served.
@PrydeWater9013 күн бұрын
I’d be reluctant to replace the ratchet strap in lieu of a working hood latch. The rest of the truck is too nice, it kinda needs a humbling feature.
Пікірлер
It's not bad, but obviously it still needs a little work. The front wheels need to get moved forward more, the hood latch needs to be installed, and the bed needs to be color matched. As for the wheels themselves, they hold it up, but there are definitely better wheels out there. Show some of your own projects Lucky.
Sweet truck!
Kool sleeper! 😎
Very!
What did it have for exhaust? It sounded good.
That truck looks a lot like Craig 909,s truck
It would be a really cool truck with decent rims. Stock steel rims have 3 uses. Jack stand, wrap an air or garden hose around or finishing out a scrap iron load. They should never ever be on anything unless you’re so poor. You just can’t do better. I been that situation but I soon as I could, they were gone.
Lucky, Love your channel. What condenser did you use on your 51 ford pu ? I'm building a 51 Ford pickup and adding AC but can't find a good fit for a condenser. If you have any details it would be appreciated.Thanks
Nice truck, dip shit of a dude!!
I want one! How much? More than I can afford, I'm guessing. I'll have to take my old F-250 with the 460 as a consolation prize, with half the horsepower if that.
Raise that shift light up 😂😂😂 oh yeah it’s a customers 😂😂😂 good looking truck, should be a lot of fun 👍🏻🙌🏼🔧🔧🔧 see ya on west in October 🙌🏼👊🏼
Nice would love to see you do a catch up with Tony Angelo if you guy's are on good terms. Miss the old hotrod garage day's.
worst cookies in the world, always stale and hard as hockey pucks.
Wasn’t a hellkitty
The speed up tripped me out.
I know this is an old video but im looking for some expert advise. Got a 2005 wranger tj right hand drive. The harness is shot. Will a normal left hand drive harness work or is there a special harness? Been looking and cant find anything really except used ones. Thought about pulling it and going wire by wire inspecting but i dont have the free time i think that might entail. Any advise helps thank you!
That’s a tough call. These harnesses are vin specific. Every car , every year and every option is a different harness.
“What we're dealing with here is a complete lack of respect for the law.”
From outside looks like old farm truck. Very cool sleeper!!!
It does!
"Right turn Clyde."
Instead of the crown bump, how about the bumpy crown.
"What is up with people who are just idiots?" Bwahahahaha...
Hot glue, not epoxy
The bed mods and overall posture look spot on. Nice truck!
Thanks 👍
Feels like that flag is mounted upside-down. The star field should be facing the direction of travel?
Might mention the flag code to the owner. I'm sure he doesn't mean to piss on the living breathing nation.
Love your HONEST!!! Videos!
I appreciate that!
Nice rig that.😎
Can you tell me about those gauges? Who makes em. Looking for a set for my build.
LOVE THIS TRUCK
Thank you!
always fun to hear the horror stories of someone else's handy work :)
👊🏻
Lucky, when it comes to idiots you cannot correct for the stupid factor.
In the process of building my own Crown Hick. Using a 2008 CVPI & my 1969 Sweptline. I was surprised that the plate CRWNHIC wasn’t already taken, so the DMV issued it to me 😂
That sounds cool 👊🏻
Sweet looking truck! Probably the last thing that I have an urge to buy..
We both need a haircut Lucky. ✌ 🇦🇺
Maybe some different wheels? But the poverty caps totally have to stay.
Here's a comment for the Ole algorithm. Cheers Lucky
Thank you!
That is a clean install.😀👍
Thank you
I like the jack in the engine compartment, like that jack can lift that truck!
👊🏻
Keep up the great work Lucky!!!
Appreciate that!
Very clean looking install.
Thanks for watching
Nice looking old Ford truck.!!
Super nice
I like the roof flag
America🇺🇸
That Coyote sounds awesome ... and I'm a GM guy :o)
Thanks for watching
@@luckysgarageshow - TBH Lucky ... you're one of my heros in the automotive world. Keep on keepin' on, bro!
That Coyote looks right at home under that hood!! 👍 You & Tony really started something with that body swap!! 👏👏
👊🏻👊🏻👊🏻💪🏼💪🏼
That's sick. Would love to do that with my Highboy either a Coyote or Godzilla but nothing fancy, just the engine swap.
Thanks for watching!
Very nicely executed.
Thanks for watching!
Not a Ford guy, but i like it.
👊🏻🏁
How was the hotdog ?
👊🏻
4:09 - I see a Volvo 145 with small bumper!
Is as a veteran I think it's a little disgraceful to have the American flag as a odds are the owner of this vehicle never served.
I’d be reluctant to replace the ratchet strap in lieu of a working hood latch. The rest of the truck is too nice, it kinda needs a humbling feature.