I just replaced my 20” wheels with 17s. Got a flat tire at 45,000 miles on the truck, perfect opportunity to swap out tires and wheels. It looks soo sexy now. Looks squatty, but lifted. I got methods on the BFG All-terrain CLASSIC pattern. Looks soo sick now. I wish I could fit bigger tires, but I’m maxed out on a trail boss standard lift.
@njfuentesrespecter817 сағат бұрын
Man if I had a custom, I would change out the headlights. They’re not bad, but there are some pretty good options. I have the LT which literally has zero aftermarket choices. It sucks bc it’s my favorite mod to do
@deltunelargo486410 сағат бұрын
Thinking about doing this on my 2004 5.3L V8, is this a good idea? I just wanna be loud man
@fixitdanner14 сағат бұрын
Looks great, can't go wrong with bds or cognito.
@user-fl3in8xv6eКүн бұрын
That looks great man, literally washing your video and waiting for the call from 4 wheel parts for my BDS 4 inch kit, it looks sick keep it up with your videos
@limitedslipautomotive18 сағат бұрын
Appreciate the support. Super stoked on how this turned out. Hope you're happy with your kit! Did you opt to reuse the Rancho shocks?
@user-fl3in8xv6e18 сағат бұрын
@@limitedslipautomotive I almost did, but decided to go crazy and pulled the trigger with the coil overs and foxs shocks…
@Prasom8216 сағат бұрын
Looks sick
@tatankahanska120Күн бұрын
Similar with the 6R80 in fords
@benroberts624Күн бұрын
Did you find seat covers that cover the middle seat in the front?
@limitedslipautomotiveКүн бұрын
I have not been searching for a set.. I’m sure there is something out there though.
@appalachianpursuit29245 күн бұрын
I’ve got 88k on mine. Runs great. Only true issue was a small hole in one of the engine oil cooler lines blowing oil everywhere. The gas cap cover door also broke
@robertjr4697 күн бұрын
Just got a 2021 Trail Boss LT, 6.2... I fear I will never have an adventure like that 🤔
@rojamon24908 күн бұрын
where did you get those seat covers?
@limitedslipautomotive7 күн бұрын
Seat covers are from Huidasource (Coverado)
@johnnyfrgo9 күн бұрын
Chevrulet sil varade o
@billyjimbob6511 күн бұрын
My 2021 Trail boss custom 5.3, 6 speed, built without AFM. Cold not no ticking ever, hot start get ticking on driver side for 5 to 10 seconds every time. Even get the ticking if I turn off key and immediately restart but it only does this if up to temp. I thought lifter at 1st, not sure now. Has done this since new, now has 11k miles (I only use it on weekends). Anyone else have this hot restart temporary ticking” ?
@limitedslipautomotive11 күн бұрын
Totally normal, it’s likely the high pressure fuel pump. My truck makes the same sound.
@billyjimbob6511 күн бұрын
Thanks!!
@Vivianauxito21 күн бұрын
What an excellent vid! Just straight to the point with everything! We released a portable Jump starter. Are you interested in giving a review?
@limitedslipautomotive7 күн бұрын
Feel free to reach out on Instagram or email please.
@Vivianauxito7 күн бұрын
@@limitedslipautomotive I just emailed
@user-fl3in8xv6e23 күн бұрын
Great choice I got the same muffler for my, it sounds like a war machine right before getting into battle.
@limitedslipautomotive22 күн бұрын
It does sound super mean!
@Will-I-am8424 күн бұрын
Out of the blue 6L80 trans failure at 66k miles. 2021 Custom Trail Boss.
@limitedslipautomotive23 күн бұрын
No way… no warning signs at all?
@Prasom8225 күн бұрын
I love your channel man !!! I got 2021 trail boss LT. I pretty much follow how you customize your truck. Got my k@n air intake. My next one will be ready lift 2.0 sst install soon. Which city do you live. That is a nice trail. 💯 supporting your channel.
@donnaheber27 күн бұрын
Are they sticky at all on the backside? I just want something that sits in my cup holder and won’t leave any residue. Thanks!
@limitedslipautomotive27 күн бұрын
They are not sticky. You have the option to add the 3M adhesive squares, which I did to the center console insert as it falls out when you lift the storage lid. Otherwise all others sit in their areas.
@chevycowboy196327 күн бұрын
Red Rock is cheaper and work fine
@pando528329 күн бұрын
Should you disconnect the truck battery before installing the pedal commander?
@limitedslipautomotive27 күн бұрын
No, no need to.
@Justin-il8ij29 күн бұрын
Get the truck tuned and put a billet torque converter in with the superior solutions thermal bypass, which I see you did. The factory tune is garbage. I have a 6L80 and have pretty much bullet proofed it. I'm not saying it can't go out, but its less likely. (TUNE IT) !!!!
@limitedslipautomotive29 күн бұрын
What tune did you use?
@Justin-il8ij28 күн бұрын
@limitedslipautomotive HP TUNE.. calibrated my speedometer to my tires, adjusted my shift points, and now my tq concerter doesn't slip. It also turned off the afm, so it stays in v8. A few more things were done also. They improved the tq/ throttle response and improved mpg. Trucks shifts so smooth, man. There are no more hard shifts at all (GREAT THROTTLE RESPONSE). I let someone who was certified to do it. It will potentially run you $400 or a little less. Im from the south, so pricing varies compared to you im sure.
@allcore5172Ай бұрын
lol you cannot do this without consequences. Most chevys in 2015 and up have a AMF system that runs through it. Unless you have a scanner to disable it the truck will not even idle correctly which in turn will give the MAP sensor a wrong reading. This is also runs concurrent with your transmission as well believe it or not. Might run good for a little while.
@insideoutsideupsidedown2218Ай бұрын
Get the LT
@peruser155Ай бұрын
Love 20"s. Im from old school where a 31x10.50 tire on a 15" wheel was the ultimate upgrade and first thing you did. Now with the size of todays pickups anything less than a 20" wheel looks puny! Which means anything less than a 33" tire is too small! Didnt think pickups have grown that much in 30 years but can you imagine a 31" tire on 15" wheel on this pickup? Would look absolutely ridiculous.
@limitedslipautomotiveАй бұрын
I definitely want to move this truck to 35” tires on 17” wheels at some point. Still dig the old school small wheel look.
@EldorWishenwellАй бұрын
I have a 2022 LTD 5.3 10 speed. Is range tech the only option for me? I see other options but not compatible with 10 speed.
@limitedslipautomotiveАй бұрын
The Plusar LT is what you’re looking for.
@dennisbrooks8546Ай бұрын
excellent
@timothybettisjr.1312Ай бұрын
What size lift kit did you have done to have these fit?
@limitedslipautomotiveАй бұрын
This truck is on a 4” lift.
@Chino780Ай бұрын
I just wish the poles and mounting rails came in black.
@limitedslipautomotiveАй бұрын
That would be a great option. I’m sure paint is an option if you do it properly.
@Chino780Ай бұрын
@@limitedslipautomotive I just purchased a setup and might try painting the bed rail portion.
@johnmunivez2221Ай бұрын
How did the lasfit pods work out for you looking into them for my TB… and yeah I just swapped my muffler with a Borla S type crate muffler
@limitedslipautomotiveАй бұрын
They are working out great so far. I unfortunately haven't had any time to go run some trails at night since the install. Hoping to get out soon now that the weather is getting nice and give them a full run-down.
@anthonygill4173Ай бұрын
What brand window visor did you put on
@limitedslipautomotiveАй бұрын
These are some cheap Amazon ones. The Chevrolet parts catalogue has some nice ones that I will probably upgrade to, or WeatherTech.
@anthonygill4173Ай бұрын
@@limitedslipautomotive do you have any issues without window sensors or anything with the “in-channel” visors?
@rmac1828Ай бұрын
Well mine come with 18's
@rsims7Ай бұрын
My guy gave us the truth and what we needed. I am stuck between this exhaust and the AWE one. If you had to do it again would you still choose the borla S or go atak or AWE??
@limitedslipautomotiveАй бұрын
Honestly I would throw a Flowmaster Super 40 on it and call it a day. If you’re dead set on Borla, buy their S-Type muffler and start there.
@DL334Ай бұрын
I love the look of the tires. I have this exact truck but with the original tires. What size are these? And do I understand you have a 2 inch lift?
@limitedslipautomotiveАй бұрын
The tires are GoodYear Wrangler UltraTerrain AT 285/65/r20 (34.6"x11.3"). That is correct, there is a 2" lift kit that is made for the Trail Boss, netting a total 4" lift kit.
@DECIFERTHIS09Ай бұрын
Does this also fix the afm
@limitedslipautomotiveАй бұрын
No, this does not affect AFM. The Range Technology AFM/DFM Disabler will take care of that problem.
@lenchoperez9134Ай бұрын
Going to try it thanks
@roberthenry9319Ай бұрын
More than $1,700.00 to make one of the most legendary truck engines in automotive history (GMC/Chevy 5.3)sound like an M1A1 Abrams tank. Some will love it, some will hate it. But regardless, this video is very well done. Marvelous editing, fantastic audio to let us hear the sound first and then tell us how it gets there, awesome camera work, gorgeous country. This video took a lot of planning and many hours to get it where it is. I have a 2020 Silverado with a 5.3, and it is great fun to hear how this classic V-8 engine can really sound. I, for one, would never do this to my truck, and I would be pissed as hell if this mod was cruising around up here in New Mexico's high country ( I would hate it). But in spite of that, this video is so well done and so much fun to watch that I respect and really enjoy what it is showing and telling us. Damn nice truck. Thank you. Strong work.
@limitedslipautomotiveАй бұрын
Thank you very much for the support and comments. It did take a good amount of planning and it’s nice to have that recognized. God bless!
@paulcondie2520Ай бұрын
Sounds good! I have a 2017 5.3, also have range technologies afm delete and the Superior thermal bypass. I'm at 51,000 no issues yet! Lol. How many miles do you have and any problems? I did the flowmaster outlaw cat back. I have RC 6" lift on 33s. Thanks Ps I have no drone with my flowmaster.
@limitedslipautomotiveАй бұрын
She just hit 45,000 miles. Absolutely zero issues with the truck so far, she’s been cherry.
@paulcondie2520Ай бұрын
@@limitedslipautomotive sweet!
@lancealbrandt9719Ай бұрын
Sounds awesome 👌 I like those tips way better than the USB ports.
@limitedslipautomotiveАй бұрын
Thanks for the feedback! I agree, love the look of the quad tips.
@jc7887Ай бұрын
badass!!! thanks for this. I was worried about getting a Trail Boss because of the basic interior but this is exciting to see I can spruce it up a bit.
@limitedslipautomotiveАй бұрын
These covers have been great over the last year. Most people think they are factory leather seats.
@mikeypooh1Ай бұрын
How long did the whole process take?
@limitedslipautomotiveАй бұрын
An hour all said and done. Could be done faster.
@SailorHeckАй бұрын
Just bought a 21 Trail boss 5.3 . Coming from a life of heavily modified toyotas and jeeps. The chevy community is def different. I like this video so sending comments you way. Useless comment #2
@limitedslipautomotiveАй бұрын
Comments aren’t useless! Appreciate the support and feedback. Plenty of videos of the truck on the channel if you are interested.
@SailorHeckАй бұрын
Great honest video..
@rajdeeps83Ай бұрын
Great video, very helpful 👍
@limitedslipautomotiveАй бұрын
Happy to help!
@USAUSAM82Ай бұрын
Hey brother! Hows it goin? That looks aawesome!
@limitedslipautomotiveАй бұрын
Im definitely diggin it.
@Lori245Ай бұрын
I want one 😛
@fixitdannerАй бұрын
I like how you temp installed it, cause I do that same thing. Great video
@limitedslipautomotiveАй бұрын
Appreciate the support!
@tonytonesworld65372 ай бұрын
Did you ever run into a situation where a tinting business said they couldn’t tint the full front windshield was that your only option was to get that eyebrow on the front
@limitedslipautomotive2 ай бұрын
No, I haven’t had that issue. The shop I go to says he’ll tint the entire windshield. I simply wanted the 6” brow.
@HunterBeans2 ай бұрын
What brand of seat covers do you have??
@limitedslipautomotive2 ай бұрын
These are Huidasource covers. I have a video on the channel that goes over everything on them.
@MadMan_1232 ай бұрын
I just put in mechanical gauges tbh i like having the numbers, its saved me a couple times.
@VANRICKELEN2 ай бұрын
Glenwood!
@dtnel2 ай бұрын
Five minute job with the proper scan tool to input the new tire size into the computer and it calibrate it automatically
![Dotsero Crater Off-Road Trail [Colorado Overlanding]](/img/d.gif)
Пікірлер
I just replaced my 20” wheels with 17s. Got a flat tire at 45,000 miles on the truck, perfect opportunity to swap out tires and wheels. It looks soo sexy now. Looks squatty, but lifted. I got methods on the BFG All-terrain CLASSIC pattern. Looks soo sick now. I wish I could fit bigger tires, but I’m maxed out on a trail boss standard lift.
Man if I had a custom, I would change out the headlights. They’re not bad, but there are some pretty good options. I have the LT which literally has zero aftermarket choices. It sucks bc it’s my favorite mod to do
Thinking about doing this on my 2004 5.3L V8, is this a good idea? I just wanna be loud man
Looks great, can't go wrong with bds or cognito.
That looks great man, literally washing your video and waiting for the call from 4 wheel parts for my BDS 4 inch kit, it looks sick keep it up with your videos
Appreciate the support. Super stoked on how this turned out. Hope you're happy with your kit! Did you opt to reuse the Rancho shocks?
@@limitedslipautomotive I almost did, but decided to go crazy and pulled the trigger with the coil overs and foxs shocks…
Looks sick
Similar with the 6R80 in fords
Did you find seat covers that cover the middle seat in the front?
I have not been searching for a set.. I’m sure there is something out there though.
I’ve got 88k on mine. Runs great. Only true issue was a small hole in one of the engine oil cooler lines blowing oil everywhere. The gas cap cover door also broke
Just got a 2021 Trail Boss LT, 6.2... I fear I will never have an adventure like that 🤔
where did you get those seat covers?
Seat covers are from Huidasource (Coverado)
Chevrulet sil varade o
My 2021 Trail boss custom 5.3, 6 speed, built without AFM. Cold not no ticking ever, hot start get ticking on driver side for 5 to 10 seconds every time. Even get the ticking if I turn off key and immediately restart but it only does this if up to temp. I thought lifter at 1st, not sure now. Has done this since new, now has 11k miles (I only use it on weekends). Anyone else have this hot restart temporary ticking” ?
Totally normal, it’s likely the high pressure fuel pump. My truck makes the same sound.
Thanks!!
What an excellent vid! Just straight to the point with everything! We released a portable Jump starter. Are you interested in giving a review?
Feel free to reach out on Instagram or email please.
@@limitedslipautomotive I just emailed
Great choice I got the same muffler for my, it sounds like a war machine right before getting into battle.
It does sound super mean!
Out of the blue 6L80 trans failure at 66k miles. 2021 Custom Trail Boss.
No way… no warning signs at all?
I love your channel man !!! I got 2021 trail boss LT. I pretty much follow how you customize your truck. Got my k@n air intake. My next one will be ready lift 2.0 sst install soon. Which city do you live. That is a nice trail. 💯 supporting your channel.
Are they sticky at all on the backside? I just want something that sits in my cup holder and won’t leave any residue. Thanks!
They are not sticky. You have the option to add the 3M adhesive squares, which I did to the center console insert as it falls out when you lift the storage lid. Otherwise all others sit in their areas.
Red Rock is cheaper and work fine
Should you disconnect the truck battery before installing the pedal commander?
No, no need to.
Get the truck tuned and put a billet torque converter in with the superior solutions thermal bypass, which I see you did. The factory tune is garbage. I have a 6L80 and have pretty much bullet proofed it. I'm not saying it can't go out, but its less likely. (TUNE IT) !!!!
What tune did you use?
@limitedslipautomotive HP TUNE.. calibrated my speedometer to my tires, adjusted my shift points, and now my tq concerter doesn't slip. It also turned off the afm, so it stays in v8. A few more things were done also. They improved the tq/ throttle response and improved mpg. Trucks shifts so smooth, man. There are no more hard shifts at all (GREAT THROTTLE RESPONSE). I let someone who was certified to do it. It will potentially run you $400 or a little less. Im from the south, so pricing varies compared to you im sure.
lol you cannot do this without consequences. Most chevys in 2015 and up have a AMF system that runs through it. Unless you have a scanner to disable it the truck will not even idle correctly which in turn will give the MAP sensor a wrong reading. This is also runs concurrent with your transmission as well believe it or not. Might run good for a little while.
Get the LT
Love 20"s. Im from old school where a 31x10.50 tire on a 15" wheel was the ultimate upgrade and first thing you did. Now with the size of todays pickups anything less than a 20" wheel looks puny! Which means anything less than a 33" tire is too small! Didnt think pickups have grown that much in 30 years but can you imagine a 31" tire on 15" wheel on this pickup? Would look absolutely ridiculous.
I definitely want to move this truck to 35” tires on 17” wheels at some point. Still dig the old school small wheel look.
I have a 2022 LTD 5.3 10 speed. Is range tech the only option for me? I see other options but not compatible with 10 speed.
The Plusar LT is what you’re looking for.
excellent
What size lift kit did you have done to have these fit?
This truck is on a 4” lift.
I just wish the poles and mounting rails came in black.
That would be a great option. I’m sure paint is an option if you do it properly.
@@limitedslipautomotive I just purchased a setup and might try painting the bed rail portion.
How did the lasfit pods work out for you looking into them for my TB… and yeah I just swapped my muffler with a Borla S type crate muffler
They are working out great so far. I unfortunately haven't had any time to go run some trails at night since the install. Hoping to get out soon now that the weather is getting nice and give them a full run-down.
What brand window visor did you put on
These are some cheap Amazon ones. The Chevrolet parts catalogue has some nice ones that I will probably upgrade to, or WeatherTech.
@@limitedslipautomotive do you have any issues without window sensors or anything with the “in-channel” visors?
Well mine come with 18's
My guy gave us the truth and what we needed. I am stuck between this exhaust and the AWE one. If you had to do it again would you still choose the borla S or go atak or AWE??
Honestly I would throw a Flowmaster Super 40 on it and call it a day. If you’re dead set on Borla, buy their S-Type muffler and start there.
I love the look of the tires. I have this exact truck but with the original tires. What size are these? And do I understand you have a 2 inch lift?
The tires are GoodYear Wrangler UltraTerrain AT 285/65/r20 (34.6"x11.3"). That is correct, there is a 2" lift kit that is made for the Trail Boss, netting a total 4" lift kit.
Does this also fix the afm
No, this does not affect AFM. The Range Technology AFM/DFM Disabler will take care of that problem.
Going to try it thanks
More than $1,700.00 to make one of the most legendary truck engines in automotive history (GMC/Chevy 5.3)sound like an M1A1 Abrams tank. Some will love it, some will hate it. But regardless, this video is very well done. Marvelous editing, fantastic audio to let us hear the sound first and then tell us how it gets there, awesome camera work, gorgeous country. This video took a lot of planning and many hours to get it where it is. I have a 2020 Silverado with a 5.3, and it is great fun to hear how this classic V-8 engine can really sound. I, for one, would never do this to my truck, and I would be pissed as hell if this mod was cruising around up here in New Mexico's high country ( I would hate it). But in spite of that, this video is so well done and so much fun to watch that I respect and really enjoy what it is showing and telling us. Damn nice truck. Thank you. Strong work.
Thank you very much for the support and comments. It did take a good amount of planning and it’s nice to have that recognized. God bless!
Sounds good! I have a 2017 5.3, also have range technologies afm delete and the Superior thermal bypass. I'm at 51,000 no issues yet! Lol. How many miles do you have and any problems? I did the flowmaster outlaw cat back. I have RC 6" lift on 33s. Thanks Ps I have no drone with my flowmaster.
She just hit 45,000 miles. Absolutely zero issues with the truck so far, she’s been cherry.
@@limitedslipautomotive sweet!
Sounds awesome 👌 I like those tips way better than the USB ports.
Thanks for the feedback! I agree, love the look of the quad tips.
badass!!! thanks for this. I was worried about getting a Trail Boss because of the basic interior but this is exciting to see I can spruce it up a bit.
These covers have been great over the last year. Most people think they are factory leather seats.
How long did the whole process take?
An hour all said and done. Could be done faster.
Just bought a 21 Trail boss 5.3 . Coming from a life of heavily modified toyotas and jeeps. The chevy community is def different. I like this video so sending comments you way. Useless comment #2
Comments aren’t useless! Appreciate the support and feedback. Plenty of videos of the truck on the channel if you are interested.
Great honest video..
Great video, very helpful 👍
Happy to help!
Hey brother! Hows it goin? That looks aawesome!
Im definitely diggin it.
I want one 😛
I like how you temp installed it, cause I do that same thing. Great video
Appreciate the support!
Did you ever run into a situation where a tinting business said they couldn’t tint the full front windshield was that your only option was to get that eyebrow on the front
No, I haven’t had that issue. The shop I go to says he’ll tint the entire windshield. I simply wanted the 6” brow.
What brand of seat covers do you have??
These are Huidasource covers. I have a video on the channel that goes over everything on them.
I just put in mechanical gauges tbh i like having the numbers, its saved me a couple times.
Glenwood!
Five minute job with the proper scan tool to input the new tire size into the computer and it calibrate it automatically