Thanks for the video, I may get one for my 62, where did you get those shocks ? I’ve been looking for some like that. Thanks.
@ClassicCarOverhaul14 күн бұрын
They are QA1, you can find them on their website. Thanks for watching!
@romeyrome32193 ай бұрын
What about the trimming that goes on the back part of your dashboard that goes in between the window and the dash did you paint that to match
@ClassicCarOverhaul3 ай бұрын
Yes, that was painted as well.
@salimsopari4 ай бұрын
beautiful color, do you have a video with the entire car painted?
@ClassicCarOverhaul4 ай бұрын
Thanks, yes I believe there is a video of the whole car painted.
@salimsopari4 ай бұрын
can you share a link of where you bought the Raptor liner in that color?
@ClassicCarOverhaul4 ай бұрын
The raptor liner comes in two colors, black and white which is tintable. I ordered the the white and tint it with paint you buy at your local auto paint shop. The instructions will tell you how much paint you add to the raptor liner. I have a video where I show it being mixed and sprayed.
@timferguson90055 ай бұрын
weld a bracket on the pick up and then drill a hole to bolt it on the pump housing if your not a professional welder don't weld it 90percent of the time the pick up falls off
@salimsopari6 ай бұрын
what is the color name and color code?
@ClassicCarOverhaul6 ай бұрын
The color is Azure Aqua 918, that is the original for this car. I had 2 different companies mix this color code and both were different shades. One was a lighter aqua and this one is darker with a greenish tint so I like this one. Thanks for watching
@salimsopari6 ай бұрын
@@ClassicCarOverhaul it looks amazing
@moparman15066 ай бұрын
What type of alternator bracket is that? Is it a short water pump set up?
@notebender50736 ай бұрын
What brand aftermarket hood did you go with. I'm in need of one as well. Is it Dynarorn, or OER by Classic Industries?
@ClassicCarOverhaul6 ай бұрын
It is a Dynacorn
@TxStang7 ай бұрын
Sam I love that color and it looks great !
@ClassicCarOverhaul7 ай бұрын
Thanks for watching
@314Doughboy7 ай бұрын
Lownstar lows on KZread did an EXCELLENT video and solution to that firewall hole opening solution. !!!
@ClassicCarOverhaul7 ай бұрын
Thanks for watching!
@BLK_WILL_SS7 ай бұрын
That paint job looks better than 90% of the ones done at the shops! I have the same kit from auto wire too!
@ClassicCarOverhaul7 ай бұрын
Thanks for watching!
@Joker_687 ай бұрын
🙌🏼 Thanks for shooting us a nugget Sammy! It’s coming together perfectly!
@ClassicCarOverhaul7 ай бұрын
Thank you and thanks for watching
@rockerpat10857 ай бұрын
Awesome Sam!!! So Happy You Have It Painted!!! Looks Great!!! Keep Rocking It Out Brother!!!
@ClassicCarOverhaul7 ай бұрын
Thanks Rocker Pat!
@jeanmariebalaes11377 ай бұрын
Hi! Sam. Glad to get news from you and your beautiful Chevy.
@ClassicCarOverhaul7 ай бұрын
Thank you and thanks for watching
@isaacwyant7637 ай бұрын
Nice Job wish I was even close to that far along was wondering how it was coming along Get used to seeing these videos and when they stop makes a person wonder how its going .Lots of good pointers from these videos thanks for taking the time to video
@ClassicCarOverhaul7 ай бұрын
Thanks for watching
@MrFireman1647 ай бұрын
Good for you ! Looks great sam.
@ClassicCarOverhaul7 ай бұрын
Thanks Roger!
@DERB_Seymour_Indiana7 ай бұрын
Nice work on the paint Sam. Car is starting to take shape, gonna be a real nice one. :)
@ClassicCarOverhaul7 ай бұрын
Thank you Sir!
@larryz247 ай бұрын
Sam, be sure to match the wire connectors wire for wire. I bought American Autowire kits for my '57 and there was 2 wires that were crossed and it wiped out my fuel sending unit. Just an FYI. The car looks awesome!
@ClassicCarOverhaul7 ай бұрын
Thank you for the information
@allan-mw7op7 ай бұрын
This car is going to be sweet,You should be very proud if it when its complete..
@ClassicCarOverhaul7 ай бұрын
Thank you and for watching
@craigthomas97467 ай бұрын
Wow Sam the car looks great! Great to see you coming along so well. My 63 had the white head liner, and looks wonderful.
@ClassicCarOverhaul7 ай бұрын
Thanks for watching!
@farmboy301177 ай бұрын
Love that color Sam! Give them a call on the wiring block and see if they'll fix it, because it sounds like they forgot to put the nut in there. Can't wait to see you driving it down the road!
@ClassicCarOverhaul7 ай бұрын
Thank you and thanks for watching!
@sixtyfourchebby45077 ай бұрын
Awesome job! Take care from the southern interior of BC Grumpy
@ClassicCarOverhaul7 ай бұрын
Thanks!
@alonzofloyd81407 ай бұрын
Way to stay with it Sam
@ClassicCarOverhaul7 ай бұрын
Thank you!
@dayslife7 ай бұрын
nice update Sam, looking good, getting closer ...maybe you could use a rivet insert or wood insert for that fuse box bolt issue or just give A autowire a call about it
@ClassicCarOverhaul7 ай бұрын
Thanks for watching, may give them a call.
@davidgriffin147 ай бұрын
Howdy stranger!
@ClassicCarOverhaul7 ай бұрын
Hey what's up!
@TheFrameoff7 ай бұрын
Nice work , just get that Impala done and ENJOY it .. Build On
@ClassicCarOverhaul7 ай бұрын
Thanks!
@jimanderson49817 ай бұрын
👍!
@ClassicCarOverhaul7 ай бұрын
Thanks for watching!
@luisernestohernandez36057 ай бұрын
Mr Chingón 👊😎👍
@ClassicCarOverhaul7 ай бұрын
👍🤣
@glennmiller90317 ай бұрын
She looks great Sam.
@ClassicCarOverhaul7 ай бұрын
Thank you and thanks for watching!
@firechief2147 ай бұрын
Glad to see you back! The paint looks great.
@ClassicCarOverhaul7 ай бұрын
Thanks Roger
@DoubleRRestorations7 ай бұрын
Wow Sam, It looks great! I had the same thing happen to me on the wire harness when I mocked mine up. Mine was an American Auto Wire, and I had it for some time put up in a box. I called them and was able to send it back to them for a repair. Hope to see more updates on the Impala.
@ClassicCarOverhaul7 ай бұрын
Thank you, may have to give them a call. How are your camaro project coming along?
@DoubleRRestorations7 ай бұрын
Slow, lol. My Daughter bought a wreck Mustang and we have been working on it
@TheShadeTreeFixitMan7 ай бұрын
I agree with your choice for a white headliner. It will make it pop more and also give you more light inside the car. Fantastic attention to detail my friend.
@ClassicCarOverhaul7 ай бұрын
Thank you George!
@rjay16747 ай бұрын
Nice seeing you back Sam.
@ClassicCarOverhaul7 ай бұрын
Thanks for watching!
@junksautomotive7 ай бұрын
Be proud Sam. Car looks wonderful. You'll no doubt figure out the details. Good seeing you back on the KZread. Junk Box Mike
@ClassicCarOverhaul7 ай бұрын
Hey Mike good to here from you. Thanks for watching!
@TheShadeTreeFixitMan7 ай бұрын
Beautiful paint job, Sam!
@jimhoran54457 ай бұрын
Glad to see a video from you Sam! Great Paint job! Now you’re on the downhill slide to get her done!👍🏻👍🏻
@ClassicCarOverhaul7 ай бұрын
Thanks 👍
@asicerik7 ай бұрын
That sucks about that missing nut or whatever. The car looks great though buddy!
@ClassicCarOverhaul7 ай бұрын
Thanks Erik! Been watching you and pops, Camaro is looking awesome!
@Welder-49567 ай бұрын
Looking good Sam! It may not seem like it, but you are on the downhill side now that you are doing final assembly and wiring. Good work.
@ClassicCarOverhaul7 ай бұрын
Thank you!
@PeteR-or5kj7 ай бұрын
I'm glad to see your progress. Car looks great! How about for that fuse block you use some machine screws and a few chrome acorn nuts on the firewall side? For that center bolt maybe try a helicoil or rivnut?
@ClassicCarOverhaul7 ай бұрын
Thanks, good idea in the chrome acorn nuts!
@62_impala_ss7 ай бұрын
Looks good! Paint job came out nice
@ClassicCarOverhaul7 ай бұрын
Thanks!
@Buckswoodshop7 ай бұрын
Hey man!
@ClassicCarOverhaul7 ай бұрын
Hey, what's up!
@johnjason72047 ай бұрын
Welcome back Sam....I've followed the build from first day I believe...Fantastic 1 man restoration
@ClassicCarOverhaul7 ай бұрын
Thanks for watching and following the build!
@santoscamacho33618 ай бұрын
Aftermarket parts you will forever have to tweak it and fabricate
@santoscamacho33618 ай бұрын
Guzzi fabrications channel shows the same problem on his builds...your suppose to slice the metal on the quarter panel side and then bang it in until you get the panel gap exactly.
@chrisulloa71419 ай бұрын
you done messed up A Aron ,,, bro looks good , if i made a video of my 63 build youd prbly laugh your as$ off, great work
@chevytk56tn7210 ай бұрын
Looking good!!!
@dappat748211 ай бұрын
I cut my Allen wrench and it fits
@craigthomas9746 Жыл бұрын
Any news on the 64
@ClassicCarOverhaul Жыл бұрын
Still working on it, hope to have it painted soon. Waiting for it to cool off a bit. Thanks
Пікірлер
Thanks for the video, I may get one for my 62, where did you get those shocks ? I’ve been looking for some like that. Thanks.
They are QA1, you can find them on their website. Thanks for watching!
What about the trimming that goes on the back part of your dashboard that goes in between the window and the dash did you paint that to match
Yes, that was painted as well.
beautiful color, do you have a video with the entire car painted?
Thanks, yes I believe there is a video of the whole car painted.
can you share a link of where you bought the Raptor liner in that color?
The raptor liner comes in two colors, black and white which is tintable. I ordered the the white and tint it with paint you buy at your local auto paint shop. The instructions will tell you how much paint you add to the raptor liner. I have a video where I show it being mixed and sprayed.
weld a bracket on the pick up and then drill a hole to bolt it on the pump housing if your not a professional welder don't weld it 90percent of the time the pick up falls off
what is the color name and color code?
The color is Azure Aqua 918, that is the original for this car. I had 2 different companies mix this color code and both were different shades. One was a lighter aqua and this one is darker with a greenish tint so I like this one. Thanks for watching
@@ClassicCarOverhaul it looks amazing
What type of alternator bracket is that? Is it a short water pump set up?
What brand aftermarket hood did you go with. I'm in need of one as well. Is it Dynarorn, or OER by Classic Industries?
It is a Dynacorn
Sam I love that color and it looks great !
Thanks for watching
Lownstar lows on KZread did an EXCELLENT video and solution to that firewall hole opening solution. !!!
Thanks for watching!
That paint job looks better than 90% of the ones done at the shops! I have the same kit from auto wire too!
Thanks for watching!
🙌🏼 Thanks for shooting us a nugget Sammy! It’s coming together perfectly!
Thank you and thanks for watching
Awesome Sam!!! So Happy You Have It Painted!!! Looks Great!!! Keep Rocking It Out Brother!!!
Thanks Rocker Pat!
Hi! Sam. Glad to get news from you and your beautiful Chevy.
Thank you and thanks for watching
Nice Job wish I was even close to that far along was wondering how it was coming along Get used to seeing these videos and when they stop makes a person wonder how its going .Lots of good pointers from these videos thanks for taking the time to video
Thanks for watching
Good for you ! Looks great sam.
Thanks Roger!
Nice work on the paint Sam. Car is starting to take shape, gonna be a real nice one. :)
Thank you Sir!
Sam, be sure to match the wire connectors wire for wire. I bought American Autowire kits for my '57 and there was 2 wires that were crossed and it wiped out my fuel sending unit. Just an FYI. The car looks awesome!
Thank you for the information
This car is going to be sweet,You should be very proud if it when its complete..
Thank you and for watching
Wow Sam the car looks great! Great to see you coming along so well. My 63 had the white head liner, and looks wonderful.
Thanks for watching!
Love that color Sam! Give them a call on the wiring block and see if they'll fix it, because it sounds like they forgot to put the nut in there. Can't wait to see you driving it down the road!
Thank you and thanks for watching!
Awesome job! Take care from the southern interior of BC Grumpy
Thanks!
Way to stay with it Sam
Thank you!
nice update Sam, looking good, getting closer ...maybe you could use a rivet insert or wood insert for that fuse box bolt issue or just give A autowire a call about it
Thanks for watching, may give them a call.
Howdy stranger!
Hey what's up!
Nice work , just get that Impala done and ENJOY it .. Build On
Thanks!
👍!
Thanks for watching!
Mr Chingón 👊😎👍
👍🤣
She looks great Sam.
Thank you and thanks for watching!
Glad to see you back! The paint looks great.
Thanks Roger
Wow Sam, It looks great! I had the same thing happen to me on the wire harness when I mocked mine up. Mine was an American Auto Wire, and I had it for some time put up in a box. I called them and was able to send it back to them for a repair. Hope to see more updates on the Impala.
Thank you, may have to give them a call. How are your camaro project coming along?
Slow, lol. My Daughter bought a wreck Mustang and we have been working on it
I agree with your choice for a white headliner. It will make it pop more and also give you more light inside the car. Fantastic attention to detail my friend.
Thank you George!
Nice seeing you back Sam.
Thanks for watching!
Be proud Sam. Car looks wonderful. You'll no doubt figure out the details. Good seeing you back on the KZread. Junk Box Mike
Hey Mike good to here from you. Thanks for watching!
Beautiful paint job, Sam!
Glad to see a video from you Sam! Great Paint job! Now you’re on the downhill slide to get her done!👍🏻👍🏻
Thanks 👍
That sucks about that missing nut or whatever. The car looks great though buddy!
Thanks Erik! Been watching you and pops, Camaro is looking awesome!
Looking good Sam! It may not seem like it, but you are on the downhill side now that you are doing final assembly and wiring. Good work.
Thank you!
I'm glad to see your progress. Car looks great! How about for that fuse block you use some machine screws and a few chrome acorn nuts on the firewall side? For that center bolt maybe try a helicoil or rivnut?
Thanks, good idea in the chrome acorn nuts!
Looks good! Paint job came out nice
Thanks!
Hey man!
Hey, what's up!
Welcome back Sam....I've followed the build from first day I believe...Fantastic 1 man restoration
Thanks for watching and following the build!
Aftermarket parts you will forever have to tweak it and fabricate
Guzzi fabrications channel shows the same problem on his builds...your suppose to slice the metal on the quarter panel side and then bang it in until you get the panel gap exactly.
you done messed up A Aron ,,, bro looks good , if i made a video of my 63 build youd prbly laugh your as$ off, great work
Looking good!!!
I cut my Allen wrench and it fits
Any news on the 64
Still working on it, hope to have it painted soon. Waiting for it to cool off a bit. Thanks
How has it held up
Any clips of the sound of this exhaust?