The videos are carefully researched to insure accurate details are provided. I respect your time and I try to keep the videos as short as possible, but still include all the important information you need to know and show you how to do it. The videos are grouped by topic via playlist. You can also use the search box on the channel page and enter keywords to find a video on this channel. Good accurate knowledge is a powerful tool. Work smart, not hard! Subscribe to my channel and get the latest videos.
Пікірлер
Thanks ! I could not figure out why my new sprayer was shooting water all over. It did not come with a rubber ring! So appreciate this!
Are the gaskets replaceable on that stopper part that you removed? The piece with the sits in the sink with the silver cap on top. I want to take mine apart but it feels like it wants to snap when I try to screw the cap off.
Can you explain what kinda pump I'd need to hook this up to? Is there such thing as an automatic pump that will pump it out once its full?
I have no where to drain the hose? Will it pump the water up and out the outdoor hatch stairs?
I have this exact same pump
Thank you so much bought an old classic b m w completely forgot how to do this stuff
Some older stoves have a screw you have to remove as well…
Lol woman giving plumbing advice no thanks next
The video has over 600,000 views, 99.2% thumbs up vs thumbs down and after watching the video over 2000 people have subscribed to this channel. The lesson is that no one should take your advice.
Thank you so much! you saved my butt. That trick with the vice grips at 1:05 was exactly what I needed.
You are welcome. Good to hear you didn't have to cut it off. That is usually what has to be done.
Thank you very much. You’ve saved me money❤❤❤❤
You are welcome. Have a great day.
Thank you for sharing!
You are welcome, it's my pleasure to help.
Directional tread? Do they make rubber tread? Great video.👍🇺🇸
There is a pro model Honda mower similar to this one. I looked at the wheels on the pro model hoping that they would be better quality and would fit on this model. Nope.
My valve handle is not freezed up. My valve handle turns a little bit in and a little bit out. It just gets stuck when you're turning it out and when you are turning it in. I can't turn off the water. and I can't turn it all the way on.
Why are you showing a valve that has been removed from the pipe? Of course we don't have that situation.
Absolutely the best how to vid.
Excellent video. It's 2024 and people are still benefitting from this. Thank you.
You are welcome. It's my pleasure to help.
Terrible video.
Thank you 😭 I thought I broke it lol
You are welcome.
Just bought one recently can I use this to remove a stuck spark plug??? I put in 5 new plugs but the last one is tough. I've used my Standord ratchet wrench but no use. Hiw can I use this torque wrench to pull out that last plug also can I use my standard ratchet nuts on this or do I need different nuts??? Anyone help???
I wouldn't recommend using the torque wrench past it's rated torque. Use a breaker bar.
very nice. Thank you
You are welcome.
I had the continuous hose connected and that was work good but now it just fills the but the hose is still connected but now the bucket fills with water do you know how to trouble shoot this?
Make sure the hose isn't clogged. Also check to see if the dehumidifier's outlet to the hose isn't clogged either. I assume that you did not move the dehumidifier or the hose.
I had the continuous hose connected and that was work good but now it just fills the but the hose is still connected but now the bucket fills with water do you know how to trouble shoot this?
1000 blessings upon you! Thank goodness someone finally explained air/pressure and how to set up the pump handle.
Thank you so much for this excellent video. I purchased a mender yesterday from HD, but it’s multi-sized, so I’m off to ACE hardware. I hope they have the one you suggested!
If you don't have thread locker (Loctite Blue - breaks loose with tools) get some and put it on the threads of the Ace mender. The only flaw is it works itself loose unless you put thread locker on it. It's been years since I've installed mine and I am very happy with it. Last time I looked they still sell this hose mender.
Best video ever!
Video was helpful. I'm trying to keep cats from doing their business in my vegetable garden. So far I am not having any luck. It picks up people and the plant leaves blowing, but did not pick up a cat that hopped the fence 10 feet in front of the sensor. Based on what you said, I may have to place the device 90 deg to what it is at right now. But that is an inconvenient spot unless I strap it to the fence. It's a narrow area with a 5'x25' garden area up against the house. At any rate, I'm not too impressed with it, but I will experiment some more.
My cat has walked in front of mine while I've had the water turned off and I could hear it clicking. Melvin was walking across the "fingers". After the Yard Enforcer was in place for a while, I noticed that Melvin avoids that area.
Simple vid, but rly useful.
Thanks! Took about 3 minutes and just eyeballed it. Thing is pulling like the day it came out of the box again. And I was thinking the belt was wore out lol! Not even close.
You are welcome!
Ty
You are welcome.
Mine does not
great video, clean, short+sweet, to the point. Includes lots of bonus info. Your awesome =)
Thanks for the compliment. Your description is exactly what I try to accomplish with every video.
Idiot boss uses my electrician wiha cross cut pliers to cut a 2.5mm² catenary wire. He fucked it and it wont even close smoothly anymore...
Thank you!!!🙏🏼
You are welcome!
Thank you so very much.
You are welcome.
Thanks for the video. My cleat was stuck in the pedal and I did not know what to do.
You're welcome.
Can you tell me what each setting dies to the pressure inside the hose? Bc I don't have that apparatus and will need to either lengthen or shorten the hose to adjust the pressure. So, does more, or less pressure increase water level? And would I lengthen, or shorten, the hose? Thanks I hope you see this
Thank you!
You're welcome!
Great video, concise and professional. Plus the use of correct terminology confirms you know what you’re doing.
Here after helping dad get pipe wrenches on a vertical pipe
Please tell me you actually left the old, damaged, frayed cable and reinstalled it on the new pulleys.....
There's another video on how to replace the cable on the channel. I stay on topic and do not wander onto another repair that is not mentioned in the title. People would howl about that.
@@Know-How-Now actually just came across your other video. Hahaha yes, I know exactly what you mean about something not in the title & the howling. However, you understand how inept the human race is at maintaining anything & the masses would assume the cable & pulleys are mutually exclusive rather than equally critical components to the same system that often wear together.
So I just replaced the water supply line under my bathroom sink, was leaking from the fitting going into the top of the hot water valve. Water line no longer leaks but now I dont have much water pressure from my hot water. I checked the other sinks and the water pressure is fine, so it has to be something with the water valve for the bathroom sink. Cold water has plenty of pressure just not for the hot water. Any suggestions?
Maybe the washer on the valve broke apart and is blocking something. I have several videos on water valves. Here's the link to the playlist. kzread.info/head/PLvce66kQTjJRuwqmH0S5Shjfj5HeRdbMr
You just saved my day! I haven't had my GCV160 serviced in at least 5 years. Just kind of forgot. Today I pulled the cord and it only went halfway. Uh oh! I followed your instructions and bought a liter of 10W30 SAE from Canadian Tire. Emptied the old (dark and dirty!) oil from the mower, filled it back up with the new stuff. I had to (somewhat gently) pull the starter cord a bunch of times to get things moving again, but once I got it moving it was able to start the engine normally again. Tip for any other novices like me: If you get a lot of smoke after you've done the oil change and started it up, it may mean you've overfilled the oil reserve. That's what I did. I just poured some back out and tried again. No more smoke. The dipstick on these mowers is hard to read when you're checking for too much oil.
It work thanks
You're welcome
Love the tips! Just the video I was needing🌹
Better description than most other videos. Thanks for sharing
Who's here because hoa sent you a ltr ?>>>
I can’t get the top open 🤦🏻♀
But how can we put it back in toilet
If you are planning to remove your flush valve this video should help. kzread.info/dash/bejne/eX550M6OkZOtorQ.htmlsi=Iz9HG0nMY224p-w5
Watched your video today. Had a problem with a broken bolt so no ability to use a screwdriver. The blade between the tank and bolt worked!! Thank you so much!!
You are welcome!
This is an old video so idk if you will see this but if you do & you can help please let me know. My issue is that my valve wont stop spinning when i try to clothes i spun it for 5 minutes it just kept spinning & spinning
It's likely broken. You'll have to replace the valve or you can try to find a matching stem and replace that part.