Пікірлер

• 
  @c_h_r_i_s_t_c_o_r_eСағат бұрын

  Where did you get the service manual for this?

• 
  @jonlambshead51154 сағат бұрын

  Good Video However You Had The Perfect Opportunity To Clean And Paint The Rim And Brackets. If I Personally Went To That Much Trouble To Take Everything Apart Like That , I Would Have Painted The Side Case on The Clutch Side As Well . But I Guess That's Just Me

• 
  @StefanMalic23 сағат бұрын

  I can't believe I watched from start to end. You're a special breed Paul, thank you for the video and the great attitude throughout!

• 
  @gibs2bКүн бұрын

  In Europe , the LX (full option) version with power windows have de small speaker holder dude

• 
  @lnvalidCredentials2 күн бұрын

  Thank you

• 
  @RaeAguirre-sr8cu2 күн бұрын

  thank you ❤

• 
  @mojumbiemusic2 күн бұрын

  Hey Paul…seems like I might have bad synchros in my 97 rav4 manual transmission…considering options. Do you know where I might find a rebuild kit for such an old transmission? Or a list of compatible transmissions? Do I just look for the same 2.0 L motor/transmission? Thank you!

• 
  @donzxborneo3 күн бұрын

  hi @Lab Coat Paul i have rav4 first gent with type G 3sge engine..did u know more about this engine?

• 
  @c_h_r_i_s_t_c_o_r_e4 күн бұрын

  Would this be the same for a first gen rav 4?

• 
  @user-ci1yw3gz5o4 күн бұрын

  This is the best of the best fulldescription how to fix a scotter ...20 thumb up ..very good explaination ....thanks a lot .men or mr lab coat scotter guy....😂😂😂😂

• 
  @mikekennedy2184 күн бұрын

  0:09

• 
  @MrAnthonydag5 күн бұрын

  I just bought a 100 50CC flying scooter. I don't know if it's been sinning, but whenever I come to a stop sign or a light, my engine turns off. And not a scooter connoisseur. And I was just learning from watching your video. Would you suggest just buying a new carburetor?

• 
  @abdullaharifbesik5 күн бұрын

  Thank you bro.

• 
  @sjjvddyumiherhv37095 күн бұрын

  -he is probably cheating on me - me watching every single second of the video at 3am

• 
  @teewhite9356 күн бұрын

  Thank you. Never changed a scooter battery in my life. And I just did all on my own thanks to this video. 👍🏽

• 
  @kermittherunner6 күн бұрын

  I'm having issues with my tucson 2018 . My mechanic told me the engine is consuming excessive oil. I have done all my maintenance roughly around 3 to 4k miles. I have an appointment this Saturday with the dealership and see what happens .

• 
  @jonathanbryant98556 күн бұрын

  The cost of your oil analysis would almost pay for a 5 quart jug of Mobil 1 synthetic oil (Walmart ) and a filter from the dealer. My advice to friends who buy Korean or European cars : Don't keep them past warranty. My next vehicle will most likely use the Camry hybrid drive train. (Rav4, Vensa, Crown, similar Lexus (probably used)). It has GDI but also has port injection. No turbos, efficiency tuned, no accessory belts. Electric car with gasoline assist. No start stop needed. Engine only runs when it is needed (and to warm up).

• 
  @d1zguy8646 күн бұрын

  This is why pgmfi is better

• 
  @jackheinyjr.23566 күн бұрын

  He doesn't say why today's carbs have the petcock pointing down for run. Not the same as the originals. This guy doesn't have a clue.

• 
  @hobizoli7 күн бұрын

  my stock LSD using 75W-140 gear oil the open diff version 75W-90

• 
  @profile_gg86488 күн бұрын

  i need help with my scooter, im not really new to bikes and i've build a quite nice one my self, but i just can't get it running right with 0-25 % gas. its does not like going very fast and runs like shit. but with 25-100% trhottle the thing just takes off Setup: 70cc stage 6 mkII racing Yasuni c16 23mm carb

• 
  @dwninetynine8 күн бұрын

  I just watched your whole video. I don’t have a Chinese scooter, I do have a Navi, and I could already do most of what you showed but for some strange reason I was drawn, like a moth to the light and had to keep your vid playing… well done, love your dry humour and I did learn a couple of things… keep up the great work, thank you…. 😊

• 
  @RichardCraneeum8 күн бұрын

  It's your pcv if you have gone through and replaced your plug wires and spark plugs and coil pack and your engine maf. That little inexpensive part should be changed at every tune up but it is overlooked and forgot about, this little piece can cause gas in your oil because your crankcase don't have enough vaccume in the crankcase to pull fuel to the combustion chamber, first code it throws is iac or idle control valve idle speed set too high, fuel system bank 1 lean O2 sensor 2 bank 1 heater circuit failure. I'm not kidding anyone who reads this, change that part when you do new coil packs and plug wires and spark plugs.

• 
  @MrCuckoobox9 күн бұрын

  Paul, Thanks for Sharing........ I was just curious about the maintenance and repair of these Scooters, I do not own one. Very Well done. FYI, I found that Meguiar's Ultimate Compound works better on "Yellowed Clear Plastic" than the Meguiar's PlastX. I use it on the Meguiar's Ultimate Compound on the Plastic Headlight Lens on our cars.

• 
  @ismailhibrahim59689 күн бұрын

  Wow ur the best

• 
  @Yamazaki11210 күн бұрын

  I have a Ryobi 160 lb torque impact wrench but it will not take off that bell clutch bolt no matter what I do. I also have a 250lb ft. torque breaker bar that also can't seem to remove the bolt. Idk why I can't just use a screwdriver to hold the Bell clutch in place and break the bolt using the torque wrench or impact wrench.

• 
  @BottleBri10 күн бұрын

  Great video if you like these scooters. Their build quality is a shame because they are stylish looking scooters. If you were putting a new variation etc on why not put a racing kit on it?

• 
  @v.e.s288411 күн бұрын

  Thanks man this helps

• 
  @user-ql6xr6mq7q11 күн бұрын

  They are all garbage, if you want a good scooter that will last buy a Vespa.

• 
  @djskilipi12 күн бұрын

  De verdad pagar 1200euros para que este le pase despues.yo paso de comprarla.tengouna numark y hasta dia dehoy va de maravilla😅

• 
  @sb_music_gaming12 күн бұрын

  Hey any chance you could do a video on removing the rear shock bushing I’m kind of stuck. Engine mount bushings no problem but this one is a pain. Thanks

• 
  @user-ql6xr6mq7q12 күн бұрын

  Why .024/0.6mm when the manual says .028/0.7mm on the gap?

• 
  @user-ql6xr6mq7q12 күн бұрын

  It says in the manual for a Tao Tao Pony 50 Spark plug gap 0.7mm or .028 not 0.6mm .024 and I have called many scooter shops and they told me the Chinese scooters 50cc the gap is .028 or 0.7mm.

• 
  @pawepoland273213 күн бұрын

  Can I do the same with a 1998 ----> 1995 Toyota??? HELP 

• 
  @technicalprovlogs624913 күн бұрын

  What about the park light,or dimmer no connection?

• 
  @austinsledge394713 күн бұрын

  Is this process the same on 50cc scooters?

• 
  @Adanchavez5213 күн бұрын

  Good stuff brother straight to the point🤙🤙🤙🤙

• 
  @michaelhudson344513 күн бұрын

  such an excellent video!

• 
  @ericfernandez709414 күн бұрын

  I like how clean you made all the parts you touched. Great workmanship

• 
  @user-lv3rw4hk6j14 күн бұрын

  Grazie mille 👍👍

• 
  @winnipeggal323015 күн бұрын

  So I own a 2014 Hyundai Accent 5dr with the 1.6 L GDI. I've owned this car from new. No real problems with this car in it's lifetime, aside from effects of driving on crappy roads and rusted out brakes. Always changed the oil twice a year, added fuel injector cleaner to the tank periodically, etc. I just passed 100k, and it started to burn/consume oil with ferocity - ~1L per 1000 km. I just changed the PCV valve, and am trying a seafoam treatment on the oil prior to my next oil change. Your video is a lot to wade through. Is there a fix, other than super frequent oil changes? It's north of $80 CAD + taxes at the least expensive place I can take it, and that's for conventional oil.

• 
  @gabrieljatombliansky81815 күн бұрын

  Need to take out the block, any video like this one? BTW Paul, you're a gift from heaven with my Toyota. Thank you

• 
  @Makula-px8fr15 күн бұрын

  Bro I can’t find the old man emu lift kit anywhere. Do you know anything comparable that aren’t spacers?

• 
  @greer240218 күн бұрын

  This is not a step by step. A lot of people don't know what to loosen or tighten. Where the parts are, and how much to tighten. We need a video that explains each step

• 
  @tilahzamliy122619 күн бұрын

  Hi, thanks for these awesome videos. My question is if i remove shaft (for back differential) from my 96 two doors rav4 , is it ok for summer season and also safety? Thanks

• 
  @LabCoatPaul19 күн бұрын

  No you can’t disconnect the driveshaft. It’s not going to improve your gas mileage anyway. You could only drive it 20 mph or slower with the center differential locked and driveshaft removed.

• 
  @christianalexander390419 күн бұрын

  I’m missing one !

• 
  @rainbowgaming844119 күн бұрын

  they need to recall all raneone owners of the rane one and all paddle switch metal we need to make a forum and sent it you them to make this fix ......your paying alot of money this could happen no way

• 
  @JOHN-yq2fg19 күн бұрын

  Paul, this may sound creepy, but I created a youtube account, to thank you for all your helpful videos. You do great work Man! Thank you!

• 
  @randomlife71820 күн бұрын

  Wow dude. Thanks for showing how crappy those things are.

• 
  @Void_77720 күн бұрын

  You can use steel wool to remove that surface rust from chrome surfaces, it works really well.