Mine's not that hard to start. Sounds about the same as mine when it does start, but I'm wondering if that's from a blown head gasket. These things are notorious for blowing head gaskets.
@MrBruce077714 күн бұрын
Great video. In your case you did not have to bleed or prime the Hydraulic pump after draining all the hyd oil. Just crack open or remove the allen bolt on your hydraulic pump as you turn the motor over without letting the motor start. You'll see lots of air bubbles coming out. .
@samray46626 күн бұрын
Anyone know what these are worth in the uk? I have an all original one full working order I want to sell? Any reply would be appreciated!!
@Fiat20vtАй бұрын
Yep had 2 of them as a kid 1997 and 2003 good old quads last for ever
@patchnl2699Ай бұрын
Does the float affect atv from starting?
@patchnl2699Ай бұрын
I have the same problem on my honda 500cc flashing lights an firing but not starting
@notachance374Ай бұрын
Did I miss the part where he checked the Flo to the pump? How does one go about that?
@zee_nycАй бұрын
Well done.
@willsmooth45Ай бұрын
Bro that’s NOT how you fix faded plastic all you did was scratch the ever living fck outta the plastic gotta use a heat gun or if you are handy with a torch use a torch at distance it’ll melt the plastic right back to original color and won’t fade or look at dull when dry 👀
@willsmooth45Ай бұрын
Gotta love the classic live in the poor part of town smoke detector beep every 30 seconds
@JColeJ972 ай бұрын
I’ve had a 97 Timberwolf since I was a kid. I moved away and let it sit for a couple years. I recently just got a 03 bear tracker and I have been stealing parts off my Timberwolf. Eventually I’m going to try and have them both running. Love these things!
@katieandkevinsears77242 ай бұрын
I've got a survivor 350 2WD from 1987. I bought it 18 months ago from the original owner. All I would need to do to make it look new is refreshing the plastic and repainting the cargo racks. It's good to see these being brought back.
@corydunaway2 ай бұрын
This was painful to watch. Locked up and you threw gas in the tank instead of oil in the cylinders 🤦♂️
@ceciliojoseph53462 ай бұрын
can u do my 6.5 diesil motor repair ? where are you located
@markeuwer38942 ай бұрын
Do you think Your 1910 can pull a 6 foot shredder respectfully. I am contemplating buying a 1910
@averybryant2 ай бұрын
It might in light/ thin grass that isnt too tall but the 5ft is all that it wants with the heavy brush cutting that i do typically
@user-ky8nb8fn6i2 ай бұрын
You need a new cab intake flange you will get air
@todds59562 ай бұрын
I bought one last weekend.
@charliekent51732 ай бұрын
Will u show how u put the deck back under it I’m struggling 😅
@onethingatatimepodcast3 ай бұрын
why didn't u go through the mud?
@averybryant3 ай бұрын
Its scary
@kevinumhey59393 ай бұрын
The radiator says head gasket !
@clintonjacobs27083 ай бұрын
Great video!
@ROBBBY613 ай бұрын
How do you bleed air after the engine has run out of fuel?
@HudsoniteJessie2 ай бұрын
Open the lines at the injectors and crank the engine. Be careful - high pressure fuel spray can cause serious injury
@michaelevans95683 ай бұрын
You can use a heat gun or propane torch to heat the cover and bend it out and Amazon some vinyl fabric and cover the seat . You should get 2 seats to a yard. My ocd has to have the handle bars straight or it drives me nuts. But good job came out nice.
@averybryant3 ай бұрын
I did end up using a heat gun to reshape it a little and found the bottom bracket where the inner part bolts to the frame was bent a little, i bent that back and the rubbing is gone completely now
@drz400sm53 ай бұрын
Any side by side or atv with a belt is junk. Worked at a polaris honda dealer. Guess which one failed.
@daltonwalters5583 ай бұрын
I believe there is more polaris in the scrap yard than any other brand I've had good luck with anything but a polaris
@shenaniganswhatsoever3633 ай бұрын
The way people ride them compromises them imo. Down the road at a constant speed. And Polaris is garbage unfortunately. Seen so many break over the years.
@averybryant3 ай бұрын
Ive never been a big fan of them, they are fun to ride but not something i trust for longevity like a honda or yamaha
@daltonwalters5583 ай бұрын
@averybryant your absolutely right they are decent when new but when they are out of warranty or 5 years old it's obvious which is better
@ironwill85963 ай бұрын
Put some Lucas in it
@THE_LANDONATOR3 ай бұрын
I know its 6 years since u made the vid but I'm bout to do the first one
@wg76443 ай бұрын
good job
@aboalssel19594 ай бұрын
ممكن احصل على أوراق لجرار ٢٠٠٠ فقدت اوراقه
@dakotal7994 ай бұрын
Truck still doing good ?
@averybryant4 ай бұрын
Still running good so far
@That_tractorfinatic4 ай бұрын
Wouldn’t be destroyed if you turned it off after first hearing it but no. Had to get the camera 🤦🏻♂️
@averybryant4 ай бұрын
The people i bought it from ran it like this, drove it to the shop, on and off the trailer. It was already too far gone before I even bought it
@user-it4wo3gf3y4 ай бұрын
Hey bud I have the same tractor. Keep an eye on the engine oil. If it keeps going up your hydraulic pump blew seals and hydraulic oil is in the engine oil. Not a good thing and is probably the reason for the piston going out. I haven't figured out the problem yet and I'm on my second hydraulic pump since I bought mine a couple of years ago. So, at the moment I'm not going to run mine much until I get this hydraulic pump thing figured out. I'm thinking that there is too much pressure in the system someplace. But, I'm not a hydraulic expert. So, I keep watching videos and learn as much as I can.
@robcarter78464 ай бұрын
i//s he available for adoption
@mikeprice18165 ай бұрын
U the goat
@thomaswoodward95145 ай бұрын
"Promosm"
@timteevin45175 ай бұрын
Those washers really should be wider. Too much slop.
@nisteber5 ай бұрын
Cool video. This was my set of wheels as a teenager in Northern Michigan (the part by Lake Superior not the part connected to Detroit). The engine sound brings back memories. What a great reliable sound that was. It always started in below freezing temperatures. If I remember correctly it would go about 55 miles an hour. Just a little bit faster than all the other Honda 250s ! The engine didn't sound too healthy at that speed though. Anyways cool video. I am watching from Thailand . 👍
@adammcalpine2315 ай бұрын
How many hours was on this engine? What caused this?
@averybryant5 ай бұрын
Around 1100 hours. The tractor was rolled and bent a rod but they continued to use it until this happened
@JC-gu2rn5 ай бұрын
Just ran into tho with my ‘08 Rincon ! Thanks for the info & walkthrough.
@redsnow34265 ай бұрын
u would think these great engineers would have a pull start for the riding mowers...instead a 150$ battery every 3 years smh sad
@markonhistory5145 ай бұрын
Where did you find the optimizer as a bare block?
@coreyseifert98416 ай бұрын
It is a 500 foreman
@coreyseifert98416 ай бұрын
I have a 2003 honda rubicon put a new carb on then d1/d2/esp started flashing I can take the tps off the carb and esp will work but if I put it back on d1/d2/esp flashes after starting it what Is wrong with it? How does the tsp need to be preloaded
@russellcalone8356 ай бұрын
I tell you what I would actually do if I was you I would take a bed liner thing out because that thing will get water underneath of it it will rot your bed out and I will paint me a Rhino liner in it and that would be more stronger but it would protect your bed a lot more better then this thing right here but I am just trying to give you an idea the Savior inside your bed all of the trucks I've ever had had them in it I have pulled every one of them out they do Rust the inside of your bed and I would actually pull it out and just put a run up on her in it it will make it more stronger
@saladinekinder81616 ай бұрын
back brakes are working
@claythomas79826 ай бұрын
It must be nice to have the resources to make it run again. Ive got the same thing, sunk 1300 in it, lasted 2 monrhs.
@TheRamair46 ай бұрын
That looks exactly like mine. And I have not been able to figure out what your mind is. What year is yours, thank you
@TheRamair46 ай бұрын
Sorry, what year Mine is
@coldhardtruth2337 ай бұрын
Anyone now where I can get parts for my 1910?
@AjadKhlan7 ай бұрын
Aapke pass koi purana engine 5501 ka Ho to dilva dijiye
@jerrylittle89227 ай бұрын
You have Led headlights in the 1910?
@mildside3227 ай бұрын
It's a 2003 Rubicon. You can tell because they integrated in 2004 the fuel level into the display and not the mechanical one on the tank that the 2003 has. I owned both
Пікірлер
Mine's not that hard to start. Sounds about the same as mine when it does start, but I'm wondering if that's from a blown head gasket. These things are notorious for blowing head gaskets.
Great video. In your case you did not have to bleed or prime the Hydraulic pump after draining all the hyd oil. Just crack open or remove the allen bolt on your hydraulic pump as you turn the motor over without letting the motor start. You'll see lots of air bubbles coming out. .
Anyone know what these are worth in the uk? I have an all original one full working order I want to sell? Any reply would be appreciated!!
Yep had 2 of them as a kid 1997 and 2003 good old quads last for ever
Does the float affect atv from starting?
I have the same problem on my honda 500cc flashing lights an firing but not starting
Did I miss the part where he checked the Flo to the pump? How does one go about that?
Well done.
Bro that’s NOT how you fix faded plastic all you did was scratch the ever living fck outta the plastic gotta use a heat gun or if you are handy with a torch use a torch at distance it’ll melt the plastic right back to original color and won’t fade or look at dull when dry 👀
Gotta love the classic live in the poor part of town smoke detector beep every 30 seconds
I’ve had a 97 Timberwolf since I was a kid. I moved away and let it sit for a couple years. I recently just got a 03 bear tracker and I have been stealing parts off my Timberwolf. Eventually I’m going to try and have them both running. Love these things!
I've got a survivor 350 2WD from 1987. I bought it 18 months ago from the original owner. All I would need to do to make it look new is refreshing the plastic and repainting the cargo racks. It's good to see these being brought back.
This was painful to watch. Locked up and you threw gas in the tank instead of oil in the cylinders 🤦♂️
can u do my 6.5 diesil motor repair ? where are you located
Do you think Your 1910 can pull a 6 foot shredder respectfully. I am contemplating buying a 1910
It might in light/ thin grass that isnt too tall but the 5ft is all that it wants with the heavy brush cutting that i do typically
You need a new cab intake flange you will get air
I bought one last weekend.
Will u show how u put the deck back under it I’m struggling 😅
why didn't u go through the mud?
Its scary
The radiator says head gasket !
Great video!
How do you bleed air after the engine has run out of fuel?
Open the lines at the injectors and crank the engine. Be careful - high pressure fuel spray can cause serious injury
You can use a heat gun or propane torch to heat the cover and bend it out and Amazon some vinyl fabric and cover the seat . You should get 2 seats to a yard. My ocd has to have the handle bars straight or it drives me nuts. But good job came out nice.
I did end up using a heat gun to reshape it a little and found the bottom bracket where the inner part bolts to the frame was bent a little, i bent that back and the rubbing is gone completely now
Any side by side or atv with a belt is junk. Worked at a polaris honda dealer. Guess which one failed.
I believe there is more polaris in the scrap yard than any other brand I've had good luck with anything but a polaris
The way people ride them compromises them imo. Down the road at a constant speed. And Polaris is garbage unfortunately. Seen so many break over the years.
Ive never been a big fan of them, they are fun to ride but not something i trust for longevity like a honda or yamaha
@averybryant your absolutely right they are decent when new but when they are out of warranty or 5 years old it's obvious which is better
Put some Lucas in it
I know its 6 years since u made the vid but I'm bout to do the first one
good job
ممكن احصل على أوراق لجرار ٢٠٠٠ فقدت اوراقه
Truck still doing good ?
Still running good so far
Wouldn’t be destroyed if you turned it off after first hearing it but no. Had to get the camera 🤦🏻♂️
The people i bought it from ran it like this, drove it to the shop, on and off the trailer. It was already too far gone before I even bought it
Hey bud I have the same tractor. Keep an eye on the engine oil. If it keeps going up your hydraulic pump blew seals and hydraulic oil is in the engine oil. Not a good thing and is probably the reason for the piston going out. I haven't figured out the problem yet and I'm on my second hydraulic pump since I bought mine a couple of years ago. So, at the moment I'm not going to run mine much until I get this hydraulic pump thing figured out. I'm thinking that there is too much pressure in the system someplace. But, I'm not a hydraulic expert. So, I keep watching videos and learn as much as I can.
i//s he available for adoption
U the goat
"Promosm"
Those washers really should be wider. Too much slop.
Cool video. This was my set of wheels as a teenager in Northern Michigan (the part by Lake Superior not the part connected to Detroit). The engine sound brings back memories. What a great reliable sound that was. It always started in below freezing temperatures. If I remember correctly it would go about 55 miles an hour. Just a little bit faster than all the other Honda 250s ! The engine didn't sound too healthy at that speed though. Anyways cool video. I am watching from Thailand . 👍
How many hours was on this engine? What caused this?
Around 1100 hours. The tractor was rolled and bent a rod but they continued to use it until this happened
Just ran into tho with my ‘08 Rincon ! Thanks for the info & walkthrough.
u would think these great engineers would have a pull start for the riding mowers...instead a 150$ battery every 3 years smh sad
Where did you find the optimizer as a bare block?
It is a 500 foreman
I have a 2003 honda rubicon put a new carb on then d1/d2/esp started flashing I can take the tps off the carb and esp will work but if I put it back on d1/d2/esp flashes after starting it what Is wrong with it? How does the tsp need to be preloaded
I tell you what I would actually do if I was you I would take a bed liner thing out because that thing will get water underneath of it it will rot your bed out and I will paint me a Rhino liner in it and that would be more stronger but it would protect your bed a lot more better then this thing right here but I am just trying to give you an idea the Savior inside your bed all of the trucks I've ever had had them in it I have pulled every one of them out they do Rust the inside of your bed and I would actually pull it out and just put a run up on her in it it will make it more stronger
back brakes are working
It must be nice to have the resources to make it run again. Ive got the same thing, sunk 1300 in it, lasted 2 monrhs.
That looks exactly like mine. And I have not been able to figure out what your mind is. What year is yours, thank you
Sorry, what year Mine is
Anyone now where I can get parts for my 1910?
Aapke pass koi purana engine 5501 ka Ho to dilva dijiye
You have Led headlights in the 1910?
It's a 2003 Rubicon. You can tell because they integrated in 2004 the fuel level into the display and not the mechanical one on the tank that the 2003 has. I owned both
Or it’s a 2001