I installed my fog light harness and followed what you did to land that wire. Worked great! Factory fog lights installed and working well.

Got my fog lights connected up on my 07 Silverado thanks to you! 💯

I just finished doing these with my truck. Instead of using the fog lights, I hooked it up to a second battery solenoid. With this switch I can see when the second battery is charging when the dash light is on. Watching your vid really helped me out. Thanks!

OUTSTANDING VIDEO!!! That was the epitome of detailed instructions! Just outstanding!

@ 6:53 the blue 15A fuse is the fog lamp that gets power from the switch you installed. Just get a "Fuse Tap" and plug in that fuse location. It already has the hot wire for the fog lamps so you don't have to remove and run the wire from underneath and risk causing other possible problems.

Thx for the video. I did my truck just like you splayed and got my fog light installed. Thank again.

Pretty much searched all day and found this video finally. Im awaiting the OEM switch, but otherwise all my goodies are here, and I am going to pre-wire and install. Feel much better thanks to this video! Cheers!

@evanshowler5177

2 жыл бұрын

And for those wondering- installed and functioning perfect thanks to this install video. 🤘

Best instructional video I’ve found for a light installation. Thank you!

@averybryant

3 жыл бұрын

Thank you

Installed mine thanks to this video no problems...thank you so much man!

great how-to video! clear and simple!

Seriously saved me a lot of time, I appreciate this video man!

@saaby8694

3 жыл бұрын

Same here

Thanks man. Really needed this!!!

Thank you for your video, it was super helpful to me!

Thanks, this video was super helpful. Worked like a charm with my light bar!!!

@pblhernandez67

Жыл бұрын

Any problem with you led bar. Like under performance or shorted

@lovellwilliams283

Жыл бұрын

@@pblhernandez67 Nope, still working great. Thank you so much for this video!!!!

Add fog light bar in bumper 2013 2500hd Thank for your detailed video took about 15 min!

Thanks for the great video added fog lights to my 2008 GMC Sierra

You did a very patient and well thought out presentation. You're a very bright and polite young man. You should be proud. Thank you for being a good person.

@averybryant

4 жыл бұрын

CutTheKnot Thank you very much!

MAN!! You killed it in this presentation. Installed my OEM Fog Lights and followed your instructions and BAM!! Working likea dream!! Thanks so much..

Thanks man that helped me a lot On my 2010 Chevy truck

thank you i install my factory fog lights you video help to much

Awesome video, gonna do this install later today.

very helpfull and it gave me a better idea of how install fog lights

Awesome video thanks for taking the time to make this video...

Exactly what I needed thank you

Nice job on this video!

thanks for posting this. I got screwed though because i cant just get bumper caps. i have to get the whole chrome piece because its one piece on my 2500

Good tutorial....swapping the entire front bumper with the fog light end caps. Thanks for the information. Make this a How to sticky on KZread.

You know extra harnesses that come with new Chevy fuel pumps work good for using wires . You might have to file it a bit but it will work.

I'm trying to figure out where to put the light. Not sure if I am able to use a bar light as fog and have it running while driving. I got the recovery hooks so it is a little fuller down there. Not sure yet if I will go with a bar in that slot or 2 small one below. Dont want to buy new end caps.

question you might not know but cant really find any info online but would this be the same for a 2000 silverado just swap the switch it also has the relay and fuse but not the switch would like to wire up as a light bar but want it to look as factory as possible without drilling a hole in the dash

Great video....i don't have that small group of wires under my junction box I have just one where you have 3

I need some help, you guys know where I can get the fog light wiring harness? I don't know anything about wiring so I'm not really too sure which harness works for this

Thank You Avery !

Great info. Thanks

Hey sir great video and very clean install. Do you have a link to the light bar that you used there?

Did you already have a factory fog lamp switch? I installed a new switch with an after market harness the green dash light comes on but not the fog lights.Any ideas what is going on?? thanks

I did install everything how you said and they look awesome on my 08 silverado but I don't know why but my truck won't start 🤔

Any problem with fuse or relay and it’s safe.

Where did you get the switch at? I'm looking to do the same to my truck?

Awesome

Does anybody know if I can just plug wire fit into the fuse and push the fuse back into the box and it would work the same or do I have to take the fuse box apart but I use a bypass use and pushed into the fuse place

link to find the oem cap kit?

Is there a parts list for this somewhere?

thanks man

Awesome video but now I can't get them to turn off can you help me out ?

Can you show how your electric radiator fans are wired up.

@seanrobbb

4 жыл бұрын

Gmpartsdirect.com

Hey man I have a question my fuse box is coming out in once piece. Instead of top coming off like yours. Can you show me where that one wire connects too. It’s it the top right corner of the fog lamp relay or does it connect to the fog lamp fuse??

@markreyes5786

3 жыл бұрын

Same any help ?

@grxmreapz7670

3 жыл бұрын

Same here

@grxmreapz7670

3 жыл бұрын

Anybody find a solution?

@markreyes5786

3 жыл бұрын

Just gotta wiggle it out apparently some come out whole and some split

Had a question when you swapped the interior switch to the new one I noticed the plug in had wires cut, is there rewiring that needs to be done when swapping the switch?

@AntonioHernandez-rx8hx

3 жыл бұрын

@1:18

@averybryant

3 жыл бұрын

Nope no rewiring. The person i bought the switch from just cut the wires instead of unplugging it for some reason

@AntonioHernandez-rx8hx

3 жыл бұрын

Ahhh makes me feel way better

@AntonioHernandez-rx8hx

3 жыл бұрын

Another thing, do you think instead of using the harness to the fuse box, could I just use a fuse tap and just run my wires down ?

@averybryant

3 жыл бұрын

If you are tapping into power for the fog lights as shown, yes that should work

does this work on a silverado LS model?

@averybryant

4 жыл бұрын

Yes for 2007-2013 models

Work on 2012 Tahoe LS? Has no factory fogs

@averybryant

3 жыл бұрын

Yes it should

So when doing this the fog lights will turn off with the high beam? My lows stay on with the high

@averybryant

3 жыл бұрын

Correct unless the mod has been done to keep the fogs on with highbeam

@texascrossbowdude636

2 жыл бұрын

Boost auto supply has a small part that you can install under the dash for $20 so that the fog lights stay on with the high beam

You do not have to modify anything on the harness of the switch, just remove the one that does not have the auxiliary light button and connect the one that does have the button.

@jorgeambrocio6359

5 жыл бұрын

The cable of the fuse box is the one that sends the current for the headlights

@kevinneedham2056

5 жыл бұрын

It’s really that simple? Damn that would be great.

@adamantium1983

4 жыл бұрын

It really is ready to go. I put the new switch in way before installing the lights and they would show working on the dash. Dealer upgrade was probably a gravy job

If you remove the factory plastic cover on the main wiring harness you’ll notice that there is already a wire for the fog lights. It’s bunches up an tied off a couple inches down. I’m not sure if there is a post to add to the switch though(pretty sure there is) all factory harnesses have the factory options, they just tuck them away per options. I noticed this while wiring my HID’s at the driver side headlight harness. It’s a blue wire with a white stripe. Hope this helps

@averybryant

4 жыл бұрын

Sean Laskey you are correct, only for certain trim levels though. In my case i had to add the wire myself

@adamantium1983

4 жыл бұрын

I had to add the wire too, 09 LT 1500

@santibanez994

4 жыл бұрын

You didn’t have to program the bcm or anything?

@adamantium1983

4 жыл бұрын

I did no programming, they come from the factory ready to be upgraded

Does this apply to 2014 Silverado?

@averybryant

4 жыл бұрын

Unfortunately it does not sorry

@lewintaquiso9458

4 жыл бұрын

Avery Bryant, do you know why it will not work?

@averybryant

4 жыл бұрын

Lewin Taquiso its is a different generation of the silverado and the equipment used is different

Link to find the OEM kit

@adamantium1983

4 жыл бұрын

www.ebay.com/itm/202556331193

I read the paper instructions but this video made me 💯 confident I could do it. Thanks and check out my channel if you have a chance