Пікірлер

• 
  @tishmata70411 сағат бұрын

  Thanks for the tour. My Mini is a 2008 Sidewalk Convertible. I've had it about a month and I'm still learning my car.

• 
  @imranabu65552 күн бұрын

  Thats not the entire dash my boy.

• 
  @udayjeetsingh24673 күн бұрын

  Guys I have to get my MOT done… will this work? Or will it show up in the MOT?

• 
  @shaylynshull57924 күн бұрын

  will this work on a ford focus i lost my key and dont have the money to replace right now

• 
  @CurlyFromTheSwirly6 күн бұрын

  Excellent video, though I would recommend most people use the pry tools.

• 
  @bensteel39448 күн бұрын

  In most modern cars if you disconnect the battery like this without keeping power to the ECU it can cause you even more problems. Don't just disconnect the battery like this.

• 
  @rubykautz734110 күн бұрын

  Does replacing the tumbler apply to the key not going into the off position- basically it turns on, and backwards but only goes as far as the auxiliary position and it’s killing my battery constantly auto is 2012 Mazda CX9

• 
  @hectorlopez947111 күн бұрын

  Is it the same on a 2007 Yaris ?

• 
  @pilotlars15 күн бұрын

  Great job wearing gloves and not touching the halogen bulb.

• 
  @lopan77615 күн бұрын

  Im gona go to the car right meow and see if this can be done thanks man will give update

• 
  @IsaiasPerez-zr7wd16 күн бұрын

  Thanks

• 
  @kennethrichmond620617 күн бұрын

  Thanks for the great view. Only thing that would make it better is to show how the screwdriver can come down from above to turn it.

• 
  @graemeleach413017 күн бұрын

  No tools your using a ratchet u plonka

• 
  @mattcasey599118 күн бұрын

  114 on ebay now

• 
  @arabahmedmohamed763722 күн бұрын

  still enigne light on dam

• 
  @KarenFuchsbichler23 күн бұрын

  Now what to do if my new replacement parts only have one adjuster and the old ones had two?

• 
  @KarenFuchsbichler23 күн бұрын

  Thank you!!!

• 
  @peterquest640628 күн бұрын

  Says no special tools,he's hardly using a special tool😂

• 
  @johnnyfigueroa469029 күн бұрын

  Thats not the dash dude

• 
  @ucOp1601Ай бұрын

  good video...yes... but as we all know different car comes with different types of socket adjustment...

• 
  @bjt-sq3fzАй бұрын

  Walmart car batteries are 💩

• 
  @gregbabington4804Ай бұрын

  THANK YOU FOR KEEPING IT SIMPLE.

• 
  @deanskidmore4495Ай бұрын

  get a OBD2 reader they're cheap enough

• 
  @alvinmontemayor6396Ай бұрын

  It works thanks!❤

• 
  @freemanmiracle7975Ай бұрын

  Finally someone explain how to turn that screw to which direction for making the beam lower or higher. Those clockwise and counterclockwise from other videos were so confusing. Thank you very much.

• 
  @mikewazowski350Ай бұрын

  Great video. The plastic covers also got hazy and yellow, but I had to replace my headlights because one of the halogen bulbs fell out of the socket. Part of the socket holding the bulb melted and it then landed on the windshield wiper reservoir, leaving a massive hole in the reservoir.

• 
  @supertailssmarthelper3215Ай бұрын

  It’s normal tools

• 
  @supertailssmarthelper3215Ай бұрын

  He said no special tools

• 
  @rofran6326Ай бұрын

  I just need a smog check! I’m going to try to do this myself. Thank you

• 
  @skaizunАй бұрын

  Entire vid shows one shot that could have been put in a blog. Worthless.

• 
  @laceIze13Ай бұрын

  This was perfect!! Exactly the information I needed. Thank you!!

• 
  @ustarecepustaАй бұрын

  How to active bluetooth pin?

• 
  @shanedridenourАй бұрын

  Thank you for posting this!

• 
  @andrewgibb8846Ай бұрын

  I know this video and thread is as old as the hills but I’ve just found a bottle of this stuff. One thing everyone must remember is: There are three layers to car paint, a base coat, a colour coat and a clear coat. If your scratches go through the clear and the paint coats, you must replace with colour paint, there’s no magic fix. But if you’ve only gone through your clear coat, you maybe able to polish away those scratches by removing clear coat paint. 👍

• 
  @JonPNairnАй бұрын

  Perfect Instructions!! Bravo, subscribed!

• 
  @bethrichards3770Ай бұрын

  Super helpful. Straight to the point. Thank you!

• 
  @Kevin-mp5ofАй бұрын

  That CRC forms a latex film, it only goes on the back of the pad. You have to use brake grease or anti-seize between the pad and the clips. Also, you have to take out the guide pins and put silicone grease on them. This is not how you do a brake job. 🤦‍♂🤦‍♂🤦‍♂

• 
  @joedoern1798Ай бұрын

  Thank you for a helpful video, you just got right to the point and answered the question! Clearly explained great job

• 
  @sharkfinn6469Ай бұрын

  It amazes me how people have fancy cameras, all the time and knowledge to make videos, all the equipment. But they still puzzle with 1 hand 😂😂to

• 
  @jonanderson68822 ай бұрын

  Thanks!

• 
  @paultiffin3302 ай бұрын

  You'll need to use an adhesion promoter to get it to stick properly. 3M make one. That's what the factory use, also good body work shops.

• 
  @cbubba12342 ай бұрын

  What about the 3 against the firewall

• 
  @hopenavajo13912 ай бұрын

  Walmart batteries are not standardized,the top post are not up front, instead they are in the back.

• 
  @HotDayPleatherSeats2 ай бұрын

  I was unaware. Good to know. Thx!

• 
  @BluetoothBlades2 ай бұрын

  I bought some today, i w8ll se how it does on my trip to Nashville.

• 
  @chiliconkyle2 ай бұрын

  The context and general advice that you provide (of this particular job) acts as a very helpful prologue before getting into one of the other step-by-step videos. I love it and hope you keep dropping more videos like these. The autoparts link that you provide takes me to the auto-part main page on Amazon but it would be quite useful if there was a specific parts link that listed the gaskets needed. Even though you recommend calling the dealerships, sometimes it helps provide more context of what I''m asking for when I can see the parts before hand. Cheers!

• 
  @HotDayPleatherSeats2 ай бұрын

  thank you for your kind words and for letting me know about the links. I'll update them shortly. Best of luck on the Sienna repair!

• 
  @user-ft1ee8ve2d2 ай бұрын

  Thanks a lot man I appreciate it. You saved my time

• 
  @user-hm9oo9mj6l2 ай бұрын

  Very helpful still 10 years later thank you brother

• 
  @RolandFarias-pn7zc2 ай бұрын

  Does anyone know how to repair RPM gauge illumination? None of the lights in RPM gauge not working including check engine, mileage etc. This is 2006 Mini. Thank you in advance

• 
  @originalmacefit2 ай бұрын

  Very helpful, thanks!

• 
  @David.-_-2 ай бұрын

  I love you. I've had multiple life experiences. Flying jets etc. You saved my life.