SS Brewtech Brew Bucket Fermenter - Review pt 1
This excellent brew bucket is certainly a fantastic piece of equipment.
Pick yours up from The Malt Miller
www.themaltmiller.co.uk/index....
Thanks for watching ple
This excellent brew bucket is certainly a fantastic piece of equipment.
Pick yours up from The Malt Miller
www.themaltmiller.co.uk/index....
Thanks for watching ple
Пікірлер: 71
Very nice bit of shiny shiny. Anything for small space flat living that the the missus isn't going to freak out about it being an eyesore is good! Looking forward to part 2.
@beerloverTV
10 жыл бұрын
Yeah got to admit had no complaints so far.
i have got one of these as a secondry fermenter and i have added a short peice of syphoning hose to the end of the racking arm just to extend it a tadge and waste will be down to a minimum good imformative video and lid gasket fitting is now simple thanks.
@beerloverTV
7 жыл бұрын
Cheers for the comments i do find the new racking arm they have to be a bit longer good idea with hose but sometimes i find it does a great job of eliminating the trub in my beers and i can rack straight from primary.
Once again a really good and thorough review. Keep up the good work mate. The videos are great.
@beerloverTV
10 жыл бұрын
cheers again appreciate the feedback
Cracking bit of kit, I really was hovering over the buy button with my latest order at the MM! Cheers, can't wait for part 2
@beerloverTV
10 жыл бұрын
Its is great bit of kit.You need to treat yourself.Your cerveza you sent me is getting the honour of doing its work inside it at the weekend.
Very nice kit and informative and clear review.
Wow you got one they are hard to get, always back ordered, nice job! Ok i think you missed a couple of great points on your fermenter's cool factor. One when you turn the dip tube to a 45 degree down angle you put the dip tube in the middle of the yeast cake, for a pure yeast cropping. Secondly if you put the dip tube to the 90 down position you can purge off the yeast cake to allow for a clean secondary fermentation without yeast lysis or having to rack over to secondary, cool huh?
Very nice bit of kit.
Very very nice bit of gear there. Hope that dodgy no chill brew you did from my recommendation does it justice! Cheers Grant thanks for taking the time and effort to put up this vid.
@beerloverTV
10 жыл бұрын
Lol i still need to get your penny black vid up appologies.And there may be a saga with my first no chill ...watch this space
Fantastic-looking piece of equipment--seems really sturdy! You're right--that should last you a lifetime! Cheers!
@beerloverTV
10 жыл бұрын
cheers mate
Bling! Top review as always. I want one too. Thanks for sharing. Cheers!
@beerloverTV
10 жыл бұрын
cheers mate.
Great vid mate. I really want one
Nice video, mate. I've been eyeing this up, and for the price of admission, it seems pretty good. Your video seals the deal for me! Thanks for putting it together and especially for covering the gasket in detail. Cheers!
@beerloverTV
9 жыл бұрын
+James Neill No problem mate im glad it has helped.Also something really exciting they are going to release a mini version soon great for small homebrewers like myself
Yes please !
This is the real business the same type of stainless steel for a motorbike exhaust would cost three times the amount so good value. Must start saving but already spent a fortune so it's a later buy. Great review.
@beerloverTV
10 жыл бұрын
Cheers mate.Its not a cheap hobby hut a rewarding one.(well cheap as you want it to be )
That is a thing of beauty my man!
@beerloverTV
10 жыл бұрын
shes a stunner
thanks for the review Im going to be getting one soon can't beat the value!
@beerloverTV
9 жыл бұрын
They are fantastic finding the carry handles so good
Great video. Hmmmm, that looks like a nice bit of kit!
@beerloverTV
10 жыл бұрын
Got to love the shiney
Top review. With regard to cleaning, in the UK TSP is known as Sugar Soap - you can get it from Screwfix etc for about £1.50. Impressive work with the gasket also. I've just got myself one of the SS conicals and can confirm that fitting that thing is an absolute ****** ******!!
@beerloverTV
8 жыл бұрын
+Dominic Bramley seriously lol as in the stuff you wash paintwork with prior to painting? Well i never knew that great tip
whats up brother? Great video by the way. I have the ss brewtech mini 3.5 gallon brew bucket. I've been brewing 2.5 gallon batches, but i'm looking to upgrading to 5 gallons. With the 3.5 mini i have to top off to 3 gallons (because of the cone bottom) in order to get the 2.5 gallons. Is it the same concept for 5 gallons? Will i have to top out to 5 in a half gallons, in order to get 5 gallons?
Great review! Cheers mate - I am worried it wont fit into my undercounter fridge but looks like you have plenty of room in yours. I may just have to go for it and find out...
Great review. I've seen this on Google and see you can buy them in NZ for around 150 pounds. There's also a local company developing one, which I'll keep an eye on. My heart says I need one now. Haha. My head says where are you going to put it to keep it cool in the summer. Maybe once I have a fridge organised, I'll try butter up Mrs Dino. In the meantime I'll be looking forward to seeing you use it. Cheers mate
@beerloverTV
10 жыл бұрын
I plan to get a kit into it at weekend coopers tweaked cerveza that bb brewery sent me to show it in fridge.
Thats a quality bit of gear, top notch. HHB
@beerloverTV
10 жыл бұрын
cheers mate
Very jealous! Should be handy when it comes to yeast harvesting. Cheers
@beerloverTV
10 жыл бұрын
Yeah very nice bit of kit should last a lifetime
Love it.
@beerloverTV
10 жыл бұрын
cheers
Great review. I tend to do 25 liter batches. I'm a little concerned there wouldn't be enough space between the wort and the lid, and that the foam from fermentation would end up coming out of the airlock. What do you think? Would it be best to use on 23L batches?
@beerloverTV
7 жыл бұрын
+Rory Scarlett well they now make the attachment to fit the lid to have a blow off tube so you could go that route i use it with mine to be save the malt miller sells both that and the silicone hose that fits it.
nice bit of kit mate , cheers
@beerloverTV
10 жыл бұрын
cheers mate
Very nice fermenter.
@beerloverTV
10 жыл бұрын
cheers
looks great
@beerloverTV
10 жыл бұрын
cheers
Liked the vid, thanks. I've just picked up the ss 10gallon brew kettle. On the passivation side of things did you use starsan or the nbs no rinse cleaner as that's what i have bottle of. I know it's similar, just wondering if it would do the same job?
@beerloverTV
9 жыл бұрын
yeah thats what i used its all the same stuff ;-)
@Neill_Clements
9 жыл бұрын
Thanks, that's what I thought.
Love this, saw it a few months ago, as a cheaper idea to a conical just a shame we don't pay US prices, lol
@beerloverTV
10 жыл бұрын
Price aint too far off.But it is very good for money
Nice!
I WANT ONE!! really cool, very nice vid
@beerloverTV
10 жыл бұрын
cheers mate
I don't understand. This unit acts as a primary, secondary fermenter and racking bucket all in one?
@beerloverTV
8 жыл бұрын
+Randall Schoverling You could but i dont tend to secondary anyway but thats another topic.You can bottle straight from the bucket but i still use a bottling bucket
@Toucs81
7 жыл бұрын
As a newby I've recently encountered the difficulty of trying the one man siphon/bucket/bottle operation, it's not fun (I need a third hand). What's your reasoning for still using a bucket with this. I would have thought less oxygen exposure the better, therefore rack direct. Thanks for all the vids, find them very helpful.
I made the mistake of using a thermonuclear device to clean mine..left the inside surface somewhat pitted !
@beerloverTV
9 жыл бұрын
What did u use ?
How do yo handle blow offs ?
@beerloverTV
7 жыл бұрын
+Raph I now have the blow off attachmemt as brewtech make and fit silicone hose to that fed into a demijohn works a treat
When I get a spare 160 quid I know what I want :-D
@beerloverTV
10 жыл бұрын
Worthwhile investment
Would you say it is worth the money?
@beerloverTV
7 жыл бұрын
Very much so the only thing i haved had to replace is the little o rings that go on the racking arm.What i love is if i let the beer settle well enough i can bottle direct from primary saving me trouble of getting my bottling bucket out.Plus the fact it will last a lifetime if looked after
@TheMatthi26
7 жыл бұрын
Still not sure whether I should get it or not, it is a lot of money compared to the Speidel.
This is a total ripoff, just buy a Speidel Fermenter, same thing, less than half the price.
@beerloverTV
7 жыл бұрын
Well depends what your looking for its done me proud if im honest i would gladly get another if i needed.