Great video. You are gonna have to help us when we finally get a couple. We will need help picking out the right ones for us.

@jerryehrlichoutdoors1277

7 жыл бұрын

Valerie Blake no problem there are a lot of good choices. It just depends what features you want and where you plan to kayak.

Thanks for all your videos about your Rambler Jerry! I just got a used Perception Rhumba 13.5, which is exactly like a Rambler and I just completed my take of your "Tryak Kollie" lol! I'm currently adding a 6" hatch to the front bulkhead and dealing with the uneven surface. Going to be doing a unique rod holder/troller soon. Mahalo from Hawaii!

@jerryehrlichoutdoors1277

6 жыл бұрын

EverydayJoe awesome! Thanks for watching, you're in kayak paradice!

Awesome. I'm definitely going use some of your ideas. I can't tell you how much I appreciate it. I'm gonna get mine rigged and post a vid soon.

@jerryehrlichoutdoors1277

7 жыл бұрын

okgo44 you are welcome, I wish I would have caught some fish today as well but the water was calm and flat and there was no boat traffic, tight lines my freind. I will be watching for your videos too!

@jerryehrlichoutdoors1277

7 жыл бұрын

okgo44 I am going to copy how you made that small seat to go over that center seating position, I had tried to do that with a beach chair and without pontoons that just doesn't work well. too unstable.

Great video,I've the baby same color 9.5 Rambler

@jerryehrlichoutdoors1277

2 жыл бұрын

Great boats

Good video Jerry!!!

@jerryehrlichoutdoors1277

5 жыл бұрын

Thanks!

Can you do a video of everything set up with your fishing gear and milk crate I’m thinking of getting the same kayak

@jerryehrlichoutdoors1277

6 жыл бұрын

+Gualterio Calderon I can and will, I need to get the boat back in the water again, thanks for watching!

What's the length of your paddle? Thanks

When you used the kayak solo and sat in the center seat, did you move the cushioned seat and backing to the center or did you just sit on the bare plastic seat?

@jerryehrlichoutdoors1277

3 жыл бұрын

I moved the rear seating stuff to the center, I have found that if you elevate the level of your hindparts it becomes much more comfortable. This kayak is long and open enough that you can stretch out and take a nap in.

do you know what type of j hooks you are using in the front and bungee cord setup, I want to do the same setup in front of my beast.

@jerryehrlichoutdoors1277

7 жыл бұрын

Jason Power I got them at Wal-Mart. that's the only place I have ever seen them. I think they are made by a company called Attwood. I wish I would have placed them lower down the side instead of on the top.

@jasonpower7154

7 жыл бұрын

Jerry Ehrlich thank you I have seen that kit, i was not sure if it would work.

@jerryehrlichoutdoors1277

7 жыл бұрын

Jason Power your welcome, I get most of my parts from Academy sports but I found some stuff at bass pro that I haven't seen anywhere else. Check Amazon as well.

What size pvc did you use for the trolley you have to put in the scupper holes

@jerryehrlichoutdoors1277

6 жыл бұрын

Joey Markland I used schedule 40 3/4 inch pipe, I also reinforced the uprights that go through the scupper holes by driving a dowel rod into the pic pipe.

@joeymarkland489

6 жыл бұрын

Thank you and i really like all the upgrades you did including the trolley will probably make mine almost the same

@jerryehrlichoutdoors1277

6 жыл бұрын

Joey Markland you are very welcome, I am glad you watched. I have since been setting in the middle seat whils kayaking.

Hey where did you buy the flush mount rod holders and what brand

@jerryehrlichoutdoors1277

3 жыл бұрын

I believe they were scotty, and I got them at Dicks sporting goods. They usually come in black or white, sometimes chrome. You can also get them with covers. Sometimes they are open at the bottom, avoid those.

@mayoeldridge9426

3 жыл бұрын

Ok cool thanks ..I've had the same kayak for a few years now but just now getting around to rigging it for fishing

Hey can u help me out and tell me what the clear Allen plugs are for? Is this to drain? And what size are the Allen head size thanks

@jerryehrlichoutdoors1277

7 жыл бұрын

Ryan Harmening I am not sure I understand the question. I don't think I had anything I have done that had allen wrench screws. what are you working with or trying to do?

@Athreehourtour

7 жыл бұрын

Jerry Ehrlich I just used my yak today for the first time and I noticed a lot of water in the hull, the boat is stock, there are 3 clear plastic plugs that look like they have a huge Allen head to open... have u experienced any water in the hull? And do u know what those plugs are for thanks for the quick reply

@jerryehrlichoutdoors1277

7 жыл бұрын

Ryan Harmening I used rivets to attach the recessed rod holders and I have used them in a couple of other spots but the majority of everything used Philip's head stainless steel screws.

@Athreehourtour

7 жыл бұрын

Jerry Ehrlich yeah I guess these are stock and come with the boat not sure what they are for

@jerryehrlichoutdoors1277

7 жыл бұрын

Ryan Harmening the big white plugs in front of the seats, I think I got your question now. I believe those are made to cover the holes created in the rotomolding process. I believe their only purpose is to seal the hull. I have never expierienced a huge amount of water in the hull while out on the water with mine. my first question is, is your drain plug screwed in tight? my second queastion is have you made any of your own modifications to your boat. I always use a marine grade silicone even on screws.

Hey sir, how good are the seats ? Thanks

@jerryehrlichoutdoors1277

4 жыл бұрын

They are ok. My wife is fine with the stock harmony seats but I didnt care for them and upgraded mine. I didnt get enough suport from the stock ones.