This is epic expedition for a Canter. Amazing footage, driving, guiding, and of course the rig. Now I understand why most Aussie Canter builds choose the spartan sleeping/cooking/shitting all done on the outside design. Thanks for taking time and effort to produce this amazing video. Just watching how it is done I learnt so much from you.

Capable truck and a more capable driver. Love the raw footage no music not much talking. Keep them coming.

@4wtruckingaus654

3 жыл бұрын

Thanks for the input mate I appreciate it👍🏻

@Bryan25105

2 жыл бұрын

that canter is a beast mate :D

Amazing video. Love the truck. Super driving skills. Above all, fantastic filming!! Cheers from 🇱🇰 !!!

First video I have seen putting one of these rigs on a 4wd track not just puttering down a dirt path with a small puddle. Love that you are putting it to it's potential. Look forward to seeing more of you on tracks like this. Well done indeed 👍

Wow….Mitsubishi should be all over you guys with this…great performance and filming…especially no bs thrash music.

Exactly the kinda truck capability and the kinda track i wanna drive through with. You're living my dream man! Loving every second of your video mate! 👍👍👍

@4wtruckingaus654

2 жыл бұрын

Thanks mate very much appreciated 👍🏻 👍🏻

I like the Canter Driving Technique, It's Awesome Guys, We love it!

Love watching your 4wdriving in your Canter. Some scary moments there, but well done. My brother and I have Canter Fg637's and try and do a 4wdrive trip each year. I absolutely love it. Keep up the video's. Enjoying them.

Superb! Only the best! What a skilled driver!!! São Paulo, Brazil.

Great video. So happy to see this kind of content.

HOLY CRAP!! 24:07 WOW! Nice spotting. I see the benefit of a four dour. You can take more videographers along! Great job.

Have seen this truck many times on Instagram and am a new subscriber to this channel. Really impressed with everything. How capable the truck is and the effort and skill that went into making this video.

@4wtruckingaus654

3 жыл бұрын

Thanks mate! Really appreciate it

Love this video..amazing 4w×truking

Great Video. Good use of the winch at the end. Thanks for sharing.

very impressive mobility and more stable than I thought it would be. Also just enough power.

Nice driving and great recovery skills, mad truck too!

Crackin vid!!!! How capable is that truck!!! Cheers for the lack of music as it distracts from the real sounds of 4wbie life, the bashes n crashes of driving through obstacles and the pucker moment at 24:02. That model Canter is super reliable as long the maintenance is kept up, I drove one (2WD version) for 7 years as a courier, my only warning is watch out for the spring release under dash handbrake as I had it release while moving around in the back of the truck. Negative aside, I stumbled across this channel by accident and I'm glad I did, as it is pure enthusiast style video, thanks for not editing out when things go wrong. Cheers

Indeed very impressive! Good job mate 👍 👏

Wow! Respect man. Wheeling that thing up those tracks takes some skill.

Outstanding job.👌👍

Pretty bloody awesome

An all round great video.

Great track, great truck, Good luck!

Next level , nice work

U have done an amazing job o the Canter.

whata amazing journey with unbeatable truck

Great trip, Good 4WDing, the winching went well. They can lift a wheel or two though and kiss a rock on the way. Using a Canter well. Dan.

I am impressed with the fun dirt course ♪

Very impressive stuff boys, Got a hint for ya, don't hold ya right hand up and point left, , simply put left is left and right is right. Good 4x4 truckin

That thing flexes more than a cruiser , nice truck

Some driving, Superb !!

love your video, greetings from Indonesia

My friend has been building a Mitsubishi Fuzu. It like that but a tad shorter and single cab but dually rear axle. He built a fiberglass box to live in that can be removed. It's a sweet rig. Very capable off road. His has the 4 cylinder Turbo Diesel. I've never seen another one yet. Cool rigs.

さすが！！　キャンター！！ 素晴らしい走破性＆カスタム👍👍👍

Awesome video - what a great track to put your rig thru its paces. I hope the destination was worth all that effort ! Well done and thanks for sharing with us.

@rothburger

2 жыл бұрын

There’s no glorious destination, it’s a loop track😂👍🏻👍🏻 It’s also been locked up for over 12 months to the public, I’m wondering how they got a key to the gate

nice work mate, whoever took the video did a great job

@maddyhorsnell9369

3 жыл бұрын

Thanks ! I think my work was better than carlos's driving 😏

great work from the spotter too

Wow, what a beast.

This thing is a beast 💯💥😎👊🏽👊🏽👊🏽

Impresionante la destreza el manejo y el dominio del camion en momentos extremos

Phantastic driving skills.Also the guide/trail scout is marvelous! Makes me really jealous!

now that is extreme!!! especially at 24 min unreal

Great video mate. Where did you get that tow/winch bar and is it ADR compliant etc?

That's my dream rig! Damn I need more money !!

Jesus, it looks like it could fall over at any moment!

Mate what a video, that was great. Awesome truck and crew! What a roller coaster ride!! I subbed early on, un-subbed when the Makita came out, and re-subbed when the Stihl was fired up! (joking..) I see from an earlier comment you're doing a video on the rig super keen on that make sure you go over all the suspension! Edited to add; thanks for not adding music to the video.

@4wtruckingaus654

2 жыл бұрын

Thanks mate! Love your comment, yeah definitely will go over the suspension in the run down video. And yeah the Stihl eats up the makita but hey I had to give it a chance 😂

Thought I better make it 1000 subs, love your vids keep up the great work guys

@4wtruckingaus654

2 жыл бұрын

Cheers mate! I Appreciate it 👍🏻

Hi there! Love the videos!! I would like to build a capable truck like this so would you be willing to share the build or specs with me. Motor, suspension, diffs etc and who did it all for you??

Muy bueno Carlos

Nice! What year is the truck?

Waaww...Awesome..👍👍👍🙏🏻😀👍

hi what average consumptions do you have with Fuso?

super bien la seance tout terrain

Clever use of sideways winching there sir.

Gladiators are such a great tyre for the price!

Best video I've seen so far, with thies kind of trucks ,i have the same truck but run hydraulic winches, small hiab crain on the ass and a few other goodies, thies are very very capable trucks ,i live in FNQ ( far north Queensland) and have recovered many of my mates up the crib track in the wet, and crazy other places up here . Keep up the good work guys.👍

Good fun👍🇳🇿

...hmnn placement of the right side mirror seems quite weird and no round mirror on it? Single rear tire but still good! ...enjoyed it anyways, thank u foo sharing...

I know this area, this truck makes everything look smaller and easier!

転けたら終わり…転けない慎重かつテクニックのある運転が必要ですね！ それにしてもかっこいい！

Wicked truck mate and some pretty amazing driving. I dont suppose you may have a build up series on the truck or photos of the canopy and roof top tent setup being built as I'm looking at doing exactly the same thing on a FSS or FTS

@4wtruckingaus654

Жыл бұрын

Hey mate, not on KZread, but the whole build is on instagram. @instacanter

@gggmaverick5896

Жыл бұрын

Thanks for getting back to me so soon. Unfortunately I dont have instagram but I may join just to download the photos of your build if thats possible

@4wtruckingaus654

Жыл бұрын

@@gggmaverick5896 If you google @instacanter you should be able to have a look through the account without having to register. Give that a go 👍🏻

@gggmaverick5896

Жыл бұрын

I ended up joining, your build is far better than I thought. Do you own or work in a fabrication shop?

Hey good to see what these things can do iv got the same model truck been trying to find some performance upgrades did I see an intercooler at the front of your truck have you done anything to get any more go out of your truck iv been struggling to find information on anything I can do?

@4wtruckingaus654

3 жыл бұрын

Basically 3 inch exhaust 4 inch intake with a high flow filter, and bigger intercooler is what I've done to mine, next step would be more fuel and boost. But after those mods I'm happy power wise at the moment. So will probably stay as is. Stainbauer does a chip for about 2k that's an other option.

great driving skills, has the engine and turbo had any enhansment? has the suspension had any changes, what size tyres and wheels have you gone for,

@4wtruckingaus654

2 жыл бұрын

Thanks mate, if you're asking for the canter it has the factory 3.9 and the factory turbo but it has bigger exhaust, intake and intercooler. Leafs are SSA 4 inch lift, and wheels are 17inch AAV rims running 40x13.5inch mt tyres, there's full list of mods in the video description 👍🏻

A really great drive that shows you can get a properly-prepared Canter up technically demanding and difficult tracks, despite what the 'knockers' say.

Wow a truly 4x4 adventure... may I know what is model of your winch & capacity that you put on that truck?

@4wtruckingaus654

2 жыл бұрын

Thanks mate, the winch is a Sherpa 17000lb but I can't recommend it, I'm going to put a runva 20000lb instead and move the Sherpa to the rear

@santjojo1

2 жыл бұрын

Cool..thanks

Good rig.. I wish Indonesia had a vehicle like this. light truck for offroad

nice canter..

This track appeared to be locked at both ends yesterday. Do you have special access bia a club or something?

@4wtruckingaus654

3 жыл бұрын

Na, the two times I've been to this track the Gates were opened, it could be closed during winter maybe because it gets too muddy? I have no idea

Good truck, good trip! Like from Russia.

really great man, can you tell me what locker you are using ? and what front axle u suing ?

@4wtruckingaus654

2 жыл бұрын

It's factory 4x4, so factory mitsubishi canter Axles, locker is Harrop 👍🏻

@herrimangara8431

2 жыл бұрын

@@4wtruckingaus654 thanks for replying man. Can you also give me the information about the locker price ? And is it canter axle (front and rear) already full floating?

@4wtruckingaus654

2 жыл бұрын

@@herrimangara8431 yes it's all factory as is, only aftermarket part is the diff center. Have a look online, Australian Adventure Vehicles supplies the locker

@herrimangara8431

2 жыл бұрын

@@4wtruckingaus654 thanks for the info mate

I thought this part of Ourimbah was closed off late 2020... was the gate open on Middle Ridge Rd?

@4wtruckingaus654

2 жыл бұрын

Yeah it was, this was 6 months ago, I went an other time before this one and it was also opened . I haven't been back since but yeah I've heard it's closed now

así viene la suspensión de fábrica o ha sido modificado?

@4wtruckingaus654

Жыл бұрын

Modificado ligeramente, esta levantado 4 pulgadas y lleva unas ballestas más duras y flexibles que las de serie

How’d you get in there ? It’s my local state forest and it’s been gated off for over a year now ?

@4wtruckingaus654

2 жыл бұрын

This was seven months ago , they must have closed it not long after, gates were opened when we were there I've heard it's now permanently closed, pretty sad

Dont you need a cage for the fuel tank?

@4wtruckingaus654

2 жыл бұрын

I thought about it but so far I haven't had any dramas

What engine is in it and what sort of economy do you get if you don't mind me asking, I'm looking at a uni but I like these as well... cheers..

@4wtruckingaus654

2 жыл бұрын

Engine is 4d34t wich is a 3.9l factory turbo. Economy is around 19lph in average, up to 22 if fully loaded beach runs 4wd etc

@drewjohn6847

2 жыл бұрын

@@4wtruckingaus654 thank you, I'm just looking into at a 99mdl 4.2 now, but think ill look for a slightly newer one, have a 65k budget but the more i look into the canters the more i like them, my current 4wd uses 18ltrs per hundred towing anyway..and i tow over 50% of the time so fuel usage seems fine

Epic rig. Can you do a video on your canopy/camper setup? Looks unique.

@4wtruckingaus654

3 жыл бұрын

Thanks mate! Yes I will be doing a rig run down video soon 👍🏻👍🏻

A truck with balcony, cool.

Can you still get to this track now the gates are in?

@4wtruckingaus654

3 жыл бұрын

The gates are still there but the two times I've been to this trail were open

Do you measure your side angles? Sketchy! Great video! Music would be nice. Digging the Snatch sweatshirt!

Performs well 👍🏻

Pro's of a canter or unimog = massive truck wheels and truck clearance. Con's of a canter or unimog = massive truck wheels are no small task if you get a flat.

thinking about getting one of these for a bit you just sold me, thanks

@4wtruckingaus654

3 жыл бұрын

Yo won't regret it mate they are awesome little trucks 👍🏻

@andrewallason4530

2 жыл бұрын

Just bought a 2004 here in Tassie in July. It’s a tipper with a 3.5m tray, with a pair of large toolboxes behind the cab. I use it for carrying my mini-excavator and other farm jobs. I just got a half built slide on camper I’m finishing off. I’m really looking forward to getting out on a few trails. Just wondering about your winch and bullbar setup. I have a full steel bumper bar ( has ‘decorative’ plastic corners) , and am thinking of just welding on a trio of arches to increase the protection for the lights. Can the single rear tires carry the same as my duallys?

@4wtruckingaus654

2 жыл бұрын

@@andrewallason4530 Hi Andrew, good on you, sounds like a good protect. The rear singles are by AAV in Queensland and they can carry the same as the Dual ones, same payload. I built the bar myself as light as possible and to give me a good approaching angle. I haven't had any dramas with the lights so it doesn't worry me having them exposed

Do these come as standard with a low range gearbox?

@4wtruckingaus654

3 жыл бұрын

Yes 👍🏻

@MD-uu5nt

3 жыл бұрын

@@4wtruckingaus654 Thanks

You guys should buy those tank track things that you can drive on and clamp down when you get to a spot like these. It would add at least five inches of ground clearance and tracks at each corner. I am assuming you have lockers front and rear so this would be the perfect candidate for them.

@4wtruckingaus654

2 жыл бұрын

Not a bad idea, I've seen them things before, it's definitely a good piece of recovery gear

By any chance can you guys make a walkthrough video on your truck ? 🤘

@4wtruckingaus654

2 жыл бұрын

Yeah we're on it will be up before Christmas 👍🏻👍🏻

What year is your Canter?

@4wtruckingaus654

2 жыл бұрын

2007 mate

me pregunto si venden este camion en north america 🇺🇸? y cuánto cuesta$

@4wtruckingaus654

Жыл бұрын

La version 4x4 creo que no se comercializo en eeuu, conozco a varios que han importado de Japon o Australia

Very entertaining! Que cojones tío!

Love. Your truck

これほど大きなタイヤのダブルピックはないなぁ💦　でも作れそう☝️　このサイズで５穴ホイルってスゴい珍しい

How did you gain Access?? It’s locked up..

@4wtruckingaus654

2 жыл бұрын

This was months ago, the Gates were opened

@rothburger

2 жыл бұрын

@@4wtruckingaus654 yeah right, ya did well getting that truck up there👍🏻👍🏻

@4wtruckingaus654

2 жыл бұрын

@@rothburger thanks mate, slow and steady 😂

@rothburger

2 жыл бұрын

@@4wtruckingaus654 🙊 the track almost got a name change to Truck opener😂

@4wtruckingaus654

2 жыл бұрын

@@rothburger 😂😂😂

Good stuff , she's a beast what's she weigh, cheers..

@4wtruckingaus654

2 жыл бұрын

Just over 5T set up as is and ready for a trip 👍🏻

Front axle has good articulation. Rear axle, not so good. I would be removing leafs from the spring pack to improve flex. Truck is not carrying it's GVM, so the heavy spring pack is not required. Lose some weight from those and increase flex. Win win.

24:08 when I almost drop my dinner

@4wtruckingaus654

2 жыл бұрын

😅

OMG...this is insane... the trail is designed to break many vehicles. Lol

Абалденно надёжная техника жаль сейчас такую не производят

It bothers me that can overs aren’t so well loved in the states.

Who needs a unimog when a canter can do this

Impressive. Are you running lockers on the canter

@4wtruckingaus654

3 жыл бұрын

Thanks mate, rear factory lsd, harrop elocker front. But couldn't use it in this video, one connector was lose and couldn't figure it out that day

the truck is very successful alone it is very noisy