Пікірлер

• 
  @luiskaiser2014Күн бұрын

  Is It dual strusion??

• 
  @LoopLinks19 сағат бұрын

  nope. Single

• 
  @musaaftabi62693 күн бұрын

  Are you going to share us the config process guide ?

• 
  @LoopLinks19 сағат бұрын

  I haven't thought about it. For upcoming builds, I will try to share it.

• 
  @sebastianoaquila38106 күн бұрын

  This is such a nice, clean version. It appears that you’ve customized some of the parts adding the Rook logo and name. Are you planning on releasing the .STLs for those?

• 
  @LoopLinks19 сағат бұрын

  Thanks. I made one customised part i.e. bottom cover plate for covering the electronics and for mounting the z end stop. If you want I can share the file in the video description.

• 
  @DestinySamuel-hm2yq25 күн бұрын

  Can the lvds off a satellite receivers work?

• 
  @Techready-ws2wr28 күн бұрын

  Hey, LoopLinks, what are your thoughts on this printer vs like the Creality K1 or Bambu P1 series? Which in your opinion is the best value and best overall. Also, can this printer print pla with the door and lid closed? Like doesn’t it have some filters on the back? Thanks.

• 
  @LoopLinks28 күн бұрын

  Hi, I can't say which one will be the best overall because I haven't used the other two printers. However, 5M Pro has been a consistent printer. I printed Rook MK1 parts in PLA and PETG, and they all came out perfectly. I have had no problems with it so far. Yes, it can print PLA with the door closed since it features a fan in the back for external circulation, which draws new air from outside the chamber and carries filtered internal air outside the printer. The only thing which I don't like is that it doesn't support live camera view in Orca when I last checked.

• 
  @KolMan2000Ай бұрын

  Rooks are good project printers for learning how a printer really works and getting hands on. This was an amazing build video, just my worry if I build one myself is that I’m just gonna say “okay that was fun,” print a few things on it then put it on a shelf and never use it again. It doesn’t really have that same performance or upgradeability of a V0.2 or something else that I could build for a bit more money and get as a kit if I don’t feel like self sourcing.

• 
  @LoopLinksАй бұрын

  Thank you! I understand; however, in my case, I had most of the parts lying around. And I needed a small printer that could be built easily without breaking the bank.

• 
  @kanrogcreationsАй бұрын

  Amazing video! Thank you for building a rook!

• 
  @LoopLinksАй бұрын

  Thank you!

• 
  @RolohaunАй бұрын

  Great work, well done!

• 
  @LoopLinksАй бұрын

  Thank you! Cheers!

• 
  @victornossalАй бұрын

  Amazing video 👏 I use this same hotend on my printers, it works well at high speeds for a good price. The only problem was a thermal error where the temperature reading varied greatly when the assembly moved very quickly. I solved this by removing the jst connector from the sensor and soldering it.

• 
  @LoopLinksАй бұрын

  Thanks for the tip!

• 
  @jasongooden917Ай бұрын

  thats the most refined Rook I've seen yet

• 
  @LoopLinksАй бұрын

  Thanks!

• 
  @VoyagingBushmanАй бұрын

  Very cool

• 
  @NSCXP2005Ай бұрын

  Will there be more videos of the Rook MK1 showing you wiring it up and it printing?

• 
  @LoopLinksАй бұрын

  um! Let's see

• 
  @GulsiferАй бұрын

  Love the Rook hope you enjoy it as much as I do. From the creator of the Rookery. Gul

• 
  @LoopLinksАй бұрын

  I love it!

• 
  @bobbydigital9323Ай бұрын

  Amazing build. Good job bro. Love the colour combo

• 
  @LoopLinksАй бұрын

  Glad you like it

• 
  @AntassiumАй бұрын

  I wonder what the total cost estimate comes to?

• 
  @SweHamАй бұрын

  Probably not too much, a good chunk of components were cheap knock offs. The rails for example say HiWin on them but they definitely aren't genuine, they lack the laser etching on the rail

• 
  @LoopLinksАй бұрын

  Cost was around 250$ excluding Motors, Extruder, Bed and Power supply. Motors, extruder and power supply were reused from one of the old 3d printer. Guide rails weren't genuine however sliding blocks used were original Hiwin.

• 
  @joseguevara184Ай бұрын

  What a dedicated work, I love it. Looks so clean, hope it prints as expexted. Congrats.

• 
  @LoopLinksАй бұрын

  Thank you very much!

• 
  @RetroDaddyPHАй бұрын

  The prints are incredibly clean! what material was used?

• 
  @LoopLinksАй бұрын

  Blue one is PLA and grey one is PETG

• 
  @RetroDaddyPHАй бұрын

  @@LoopLinks Great! PLA is stiffer than PETG and ABS, but I wonder how it will deal with the heat during printing?

• 
  @Magin68Ай бұрын

  Construction came out nice! Are you working in PLA?

• 
  @LoopLinksАй бұрын

  Blue one is PLA and grey one is PETG

• 
  @satell2805Ай бұрын

  Классно получилось! Спасибо!

• 
  @purpleleaf4305Ай бұрын

  You should provide 3d files

• 
  @LoopLinksАй бұрын

  They are already provided in video description.

• 
  @TheIrishCreamyАй бұрын

  Thanks for the teardown!

• 
  @ANIMEFAN-ym6tc2 ай бұрын

  CAN YOU CLICK MOUSE BUTTONS WITH THIS

• 
  @crdleoffiilth002 ай бұрын

  niCe. is there any suggestions for making wireless printer on an old printer without buying wireless printer servers?

• 
  @bigirish48862 ай бұрын

  Nice work but some info and instructions would be more helpful

• 
  @LoopLinks19 сағат бұрын

  Ok next time

• 
  @ronanrodrigues57532 ай бұрын

  ​@LoopLinks do i need to download any type of wofo driver for this?

• 
  @sergheizavrotki44733 ай бұрын

  👌

• 
  @unamed66633 ай бұрын

  Is it possible with ds4 controller trackpad?

• 
  @techdatamexico45303 ай бұрын

  Amazing job !!!

• 
  @LoopLinks3 ай бұрын

  Thank you!

• 
  @techdatamexico45303 ай бұрын

  FANTÁSTICO !!!

• 
  @Alex-sx3tz3 ай бұрын

  Te adoro, estaba buscando este video para un proyecto del liceo jajaja

• 
  @keboireng3513 ай бұрын

  Can this flashforge 5M Pro machine print Nylon filament?

• 
  @LoopLinks3 ай бұрын

  AD5MP Pro does not support printing with Nylon Filament.

• 
  @keboireng3513 ай бұрын

  can you help me. I have bought a flashforge 5M Pro, but it can't print on Nylon filament material, the product always comes off the magnetic table.

• 
  @carloscalves3 ай бұрын

  its a software problem, because Flash Print is limited dont have control about your first layer. Install Orca Slicer for this machine to gain control about every detail.

• 
  @heerbrahmbhatt69173 ай бұрын

  Loved the idea of the lamp! Very creative!

• 
  @LoopLinks3 ай бұрын

  Credit goes to @3DMakerNoob

• 
  @Lensman643 ай бұрын

  Nice! You should program the light to "fill up" to follow the printing % progress. Start from no lights to full lights. You should also include where you got the parts like leds and controller board.

• 
  @Legionrider3 ай бұрын

  Amazing 🤩

• 
  @LoopLinks3 ай бұрын

  Thanks 🤗

• 
  @quick-silver8603 ай бұрын

  I originally bought an Altec baby boom. I.loved it. It finally died after Night after night I kept it hooked to the charger so I could watch movies. I killed the battery. Soooo I went and bought 2 more Altec speakers..the hydro link(?) With all the STUPID DISCO LIGHTS. I think they soldered in the lights back arse wards or something backwards because I have to click through every light setting to get to normal speaker mode. NORMAL SHOYLD BE THE 1ST SETTING. Thats why Im here..I want to know if I can open it up and snip the LED lights. I hate these things.

• 
  @LoopLinks3 ай бұрын

  sorry I will not be able to help with your query

• 
  @er-stereo4 ай бұрын

  Still making❤ i will reply

• 
  @kensyguerrero29095 ай бұрын

  question matte does it cut gold acrylic?

• 
  @LoopLinks5 ай бұрын

  Nope.

• 
  @3dp_edc5 ай бұрын

  do you have a write up or something that explains this in more detail?

• 
  @ramazanyarar59105 ай бұрын

  Can we enlarge the work area?

• 
  @LoopLinks5 ай бұрын

  Yeah but you need to add a support to the x-axis from the other side. As in the end I showed how much x-axis is tilting in the corner where there is no support and due to that there were some imperfection in the engraving.

• 
  @ahandleofindiancitizen5 ай бұрын

  Can i use it to cut phone skin

• 
  @LoopLinks5 ай бұрын

  I haven't tried. Anyways this machine was just an experiment. It cannot be used as commercial ones as there are features like blade offset and many more which it doesn't have.

• 
  @skilledcamman47526 ай бұрын

  What was the cost

• 
  @LoopLinks5 ай бұрын

  I paid $475 without raspberry pi and btt skr mini e3 v2.

• 
  @josepcamps47856 ай бұрын

  Please could you provide me with the measurements of the profiles and the rail? thank you

• 
  @dalwinderssi40947 ай бұрын

  Hello sir please can you tell how to genrate plotter codes to make pcb. Thanks

• 
  @warmachine6767 ай бұрын

  Is it possible to make pocket router with sim slot

• 
  @RavenHart-sx8xs7 ай бұрын

  Can you make a video with smart tv WiFi module?

• 
  @schmidtalex68207 ай бұрын

  Really awesome. Nice idea with mirror

• 
  @LoopLinks7 ай бұрын

  Thank you so much 😊

• 
  @joetkeshub7 ай бұрын

  Thank you! as informative as helpful. Great review

• 
  @GarryGri7 ай бұрын

  So is there already an Arduino sketch available to power these types of Homebrew plotters?

• 
  @heerbrahmbhatt69177 ай бұрын

  Great tutorial! ❤

• 
  @LoopLinks7 ай бұрын

  Thank you! 😊