Reuse USB Touchpad from an Old laptop | SYNAPTICS TM1679 |
In this video we will show you how to make simple usb touchpad scrapped from old laptop.
Download circuit diagram from here - drive.google.com/open?id=1glu...
Parts list
1.PS/2 to USB converter - amzn.in/ixrNtUC
For any information comment below.
Music Credits -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Track: Kozah - Haha [NCS Release]
Music provided by NoCopyrightSounds.
Watch:
Free Download / Stream: ncs.io/HahaYO
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Пікірлер: 100
The company that makes this trackpad (Synaptic) actually use the same pinout. The one in the video may work, but the most common pinout is: T22 - VCC (+5v) [Red] T23 - GND (-5v) [Black] T10 - CLK (D+) [Green] T11 - DATA (D-) [White] In the video, it works out fine, but some of these pads don't always line up the same with every Synaptic track pads. So it's best to use the pinout I gave above. Also, PS2 and USB adaptors are l passive and just basically short certain wires. So you can actually wire this up directly to a USB and it should work.
@LoopLinks
4 жыл бұрын
I did according to its datasheet and is working fine. and thank you so much !!
@AsianTheIdentity
4 жыл бұрын
are you sure about this? there are active and passive adapters, the one in the video is an active one.
@aaronmccombs4966
3 жыл бұрын
I can confirm the above pinout works with the following Synaptics touchpad models: 920-001019-02 Rev A. 920-000241-01 Rev B. But it only works if it's connected to an active USB to P/S2 adapter. I also tried that pinout with an USB cable and Windows 7 could not recognize the "USB"device. When connected via P/S2 cable to the USB active adapter, the touchpad recognize: Single tap to select an icon on the desktop Double tap as double click. The vertical scroll also works great on any window.
@cieknie
2 жыл бұрын
I have touchpad ripped out of Lenovo Yoga 520. I see points marked as: TR, T2, T3, T4, T5, T21, T1, T8, T9, T24, T20, T23, T33 Are you able to tell how I should solder wires to it?
@unamed_666
3 ай бұрын
Is it possible with ds4 controller trackpad?
I'm a bit new to this but I must say, I'm flabbergasted at how simple the connection to the touchpad is!
this is awesome man 😋😁
I have all these old laptops and finding this is like awesome. Random fun stuff to do with computers. Heck yeah
Hey man, thanks for the vid! Question: must the adapter be that specific one? And why would you jump the ps/2 female plug by soldering directly onto the pcb, instead of keeping the/soldering a ps/2 male plug to the end of the cable?
Os adaptadores PS2 e USB são passivos e basicamente curvam certos fios. Então você pode conectar isso diretamente a um USB e ele deve funcionar. A empresa que fabrica esse trackpad (Synaptic) realmente usa a mesma pinagem. O do vídeo pode funcionar, mas a pinagem mais comum é: T22 - VCC (+ 5v) [vermelho] T23 - GND (-5v) [preto] T10 - CLK (D +) [Verde] T11 - DADOS (D-) [Branco]
@LoopLinks
4 жыл бұрын
Thank you for sharing it !
@DilanSalvatore
3 жыл бұрын
T10 and T11 is not there
This is great! Perfect for an idea I have. Huge thanks for making this video. 👍🏻
@LoopLinks
4 жыл бұрын
Glad it was helpful!
Thanks for sharing.
@LoopLinks
4 жыл бұрын
Thanks for watching!
Thank you. Is it work with tm1680?
Good one, will this work for MacBook Pro track pad as well?
@LoopLinks Is it ok if I usb directly instead of ps/2?
Wait, touchpads use the old ps2 standard? Wouldn't have thought about that... neat!
@houghwhite411
4 жыл бұрын
Yep, since USB will always scans using system power, and ps2 is using system intterupts that only scans when you move your finger above it it's just better for power conservation
@justinaspetkauskas3794
2 жыл бұрын
yes, and some laptop integrated keyboards use PS2 as well
@sampletext69420
Жыл бұрын
@@houghwhite411even newer, windows precision compatible touchpad?
Thanks
can you strait up connect it to usb cable?
Excellent! Thank you very much! Is it necessary to configure it or download a driver to make it work on the PC? how can it be done ?. Thank you very much and greetings!
@LoopLinks
4 жыл бұрын
No there is no need to configure/download the drivers
@vastley9127
4 жыл бұрын
thank you very much!
I finally mada it works, I used a TM1800, the pointer moves ok but left and right buttons dont work, any suggestion?
@LoopLinks
5 жыл бұрын
They won't work. Stay tuned i will be uploading the video on that.
@drozcan
5 жыл бұрын
@@LoopLinks I want to do a high end touchpad with something like razer blade's touchpad. Is it so different than this?
@LoopLinks
5 жыл бұрын
yes
Is it possible with another type of cable? and what is that USB?
there is no propper trackpad avaiable and i want one for my desktop.. so now i build one myself!!!
Hello, dude, nice video. Do you know if all those "T" outputs numbers that you used are the same for all touchpads? Because I'm trying to do the same with a Synaptics 920-000610 and it just doesn't work.
@LoopLinks
5 жыл бұрын
No, they are not same.
@wagnercaetano9160
4 жыл бұрын
@@LoopLinks Hi bro, there is a way i can find by my self with a multimeter the right pinouts of any board? Or do you have a link for datasheets? thanks
How would an 8-pin work? Do you or anyone you know have a video where a trackpad has a cable with 8 pins wiring it up so that it can be used with USB?
I'm looking for a way to o this on a Dell Vostro 3350, it's a keyboard mouse combo (I think), the model is NSK-DX0BW Thanks
@LoopLinks
4 жыл бұрын
Look for pinouts. Maybe this video can be helpful - kzread.info/dash/bejne/ipiu0Llpitjgd9I.html
Where can I download datasheet for synaptics tm540?
just tell me wha to do on an acer aspire 4120Z pls i would appreciate it
good waw amizing
@LoopLinks
4 жыл бұрын
thank you!
does it work on multi touch touch pads too? also, does the touch penetrates a 10 mm glass?
@LoopLinks
2 жыл бұрын
haven't tried
Do you think you could help me or make a video on how to convert a laptop keyboard over to usb protocol?
@nelsonrecoba4691
3 жыл бұрын
Protocols are in mainboard. Laptop keyboards are just keys with connectors...
Is it possible with ds4 controller trackpad?
Could you also put video for keyboard from laptop
can your DIY touchpad use gesture, multifinger functions?
@LoopLinks
4 жыл бұрын
no
@DrZipZwan
4 жыл бұрын
@@LoopLinks for this feature you should use arduino/ HID compatible...
Hey man, i have just scraped a TM1382, any idea where i could find some schematics? I tried google, but didn't get a lot of info about it.
@LoopLinks
4 жыл бұрын
Send me the pic of it on my mail, maybe then i could help.
@tatterdemalion898
4 жыл бұрын
@@LoopLinks hello again, i eventually found the data i was searching for. I am getting my hands in a ps/2 connector tomorrow, and i will post some pictures with what i managed to do. :)
@loopkinks I have Synaptics TMP2970 model Will this work?
@LoopLinks
4 жыл бұрын
It will probably work, just find its pinout and connect accordingly as shown in video.
Pls ake more vid on Touchpad
@LoopLinks
4 жыл бұрын
Ok.
Why not to plug directly into the usb connector? Because of the driver?
@dylandrew6071
2 жыл бұрын
Because it's PS2 not USB
@slashplaypro
2 жыл бұрын
@@dylandrew6071 Thanks for ther comment, but actually, check other comments and you will se other ideas that confirm my theory :)
Hi dude my touchpad is synopatics tm2182 extracted from lenovo x1 carbon 1st gen, and i do have t12 and t13 pins but would they work for me? If u want thenicansnd u pic too
@abdulrehmansamejo6555
4 жыл бұрын
Other question is can i use usb connector instead of ps*** connector
@LoopLinks
4 жыл бұрын
I could not find any datasheet. You need to find the pins manually.
What is the model of the old notebook?
@LoopLinks
5 жыл бұрын
Hp pavillion g4 series laptop.
is it possible to make it smaller
@LoopLinks
5 жыл бұрын
It cannot be more smaller than shown in the video in last.
If i connect the touch pad with usb will it work
@LoopLinks
3 жыл бұрын
I am not sure but someone has commented regarding the same.
CAN YOU CLICK MOUSE BUTTONS WITH THIS
Very cool! But for me it recognized as a barcode reader... what do I do?
@dylandrew6071
2 жыл бұрын
Kill it with fire
@dylandrew6071
2 жыл бұрын
On a serious note, are you using the PS2 keyboard usually purple or the PS2 mouse green?
@Miguvideos
2 жыл бұрын
@@dylandrew6071 Hi man, I'm using the green one.
Im looking for model TM-00540-013 (Acer Laptop)
@LoopLinks
3 жыл бұрын
I couldn't any information regarding this model so i would recommend you to manually find out the pinouts.
Can I connect this to my Android?
@LoopLinks
3 жыл бұрын
yes i think so via OTG.
Bro, my old laptop touchpad is not of synaptic. there is no name. and only T16 pins. Laptop model: Hasee Please help
@LoopLinks
4 жыл бұрын
You can mail me the picture of your touchpad.
My touchpad is TM 00265 HOW SHOULD I KNOW THE PINS
@LoopLinks
4 жыл бұрын
I found pin connection of my touchpad on the internet. If you cannot find yours then check out this video to figure out pin connection - kzread.info/dash/bejne/ipiu0Llpitjgd9I.html
welp this broke my laptop
Keyboard to usb
will this method work with very synaptics touchpad? I have a Synaptics TMP2991 920-002807-07Rev1
Annoying loud music.
Still making❤ i will reply
Oh, lol. I thought you were gonna make a touchpad from scratch, using a piece of smooth material then making custom wired solderings.
This is diy😨😨😨
-b
diycommunity.4fan.cz/pinouts/ here are some pinouts
The music is too loud and annoying
@Z-Ack
Жыл бұрын
Content loudness is +6.1db... it should be set to -2db.. that way when you turn the volume down on devices it will mute the audio otherwise you have to click mute in order to make the audio stop and turning the volume down as far as it goes does not mute the sound, there will still be 6.1db coming through ....
Fake