Building quality cars for fun, engineering what others can't, and traveling having a good time. The larger the channel grows the bigger the builds, and better content.
A few years back, I turned a 2005 Magnum into a police bait car. I had it where you could lock the doors, roll down the windows, shut it off and sound the horn from an internet based remote relay controller. The one thing I remember is how utterly disposable that interior was. Sadly, no shitheads stole it. We should have used Chargers and waited a few years.
@richardjones38Күн бұрын
Impressive that it didn't lose tracking which doing such a complex scan, and how fast it re-oriented the model when you started doing more scanning. Surely the low ambient light levels are part of why it scanned so well? I've found any light with mains flicker causes all sorts of scanning problems. It'd be great if the budget scanner makers did add reverse engineering features into their software, but I'm not sure I see that happening. How big is the budget reverse engineering market vs the aesthetic / blender / gaming modelling market? I agree an easy way to align the scan with a cartesian coordinate system, add other planes not in that coordinate system, and the take sections through the mesh parallel to those planes to capture hole and boss centres and sizes would be very useful. Selectively turning sections through near circular features into arcs would be super useful too (although no doubt they'd ned to be an a separate file such as a dxf - not a problem as long as it's on the same absolute coordinate system as the mesh). I don't think such an imaginary piece of software needs to be able to do a lot more than that to make reverse engineering scans of car parts in CAD a lot easier. It would also have the nice advantage of being compatible with any CAD system if it only output stl's and dxf's.
@rubberbumper57472 күн бұрын
tempered glass cannot be cut ,only plate glass and laminate
@mrsms-nt4lu2 күн бұрын
I just subscribe because he is hot asf 🔥 😍 😩
@profezzorx91312 күн бұрын
Oh damn, I remember subscribing to this channel 3 years ago... I though this vehicle would have been done by now.
@chrispeden59013 күн бұрын
Why did you speed up going through the process putting on the body armor panels?
@rXco_dXnero4 күн бұрын
Must be nice to be rich to be able to afford the man hours and have the tools to do this.
@mtdarealist43844 күн бұрын
Can you do this with a dodge caliber?
@sd014 күн бұрын
Kid wasted a good Truck there. I drove an 01 that looked almost identical to yours for 15 years and put 250k miles on it and that thing was a survivor. When I walked away from it it needed a new Engine but everything else worked.
@jsands98854 күн бұрын
Oh look! A Dodge Charger Touring.
@20b3rdgen5 күн бұрын
I instantly recognized the rear iron plate, but you called it a housing. The housing sits between the iron plates with a rotor in it and is make of aluminum.
@jockodog20095 күн бұрын
Lube it by pouring it out of the bottle, onto the tool, bench & floor? No. Sloppy. Very poor example for learning DIYers. If I saw a mechanic run a shop like that, I'd run in the opposite direction. You tossed your hand held tubing straightener in the trash?.......just because you got a bigger, more expensive one? Who does that? No one smart.
@andrewdd675 күн бұрын
good content very interesting and helpful information on restoration on cars
@Rextafier-q9b5 күн бұрын
What are there bearing part numbers in differential
@Junkyard_Dave4 күн бұрын
They are on the bearings
@dl-417.sohka.madika5 күн бұрын
You can tell is an 08 mixed with a 24
@caleno945 күн бұрын
hey how much would a swap cost if all the parts were sourced great video!
@Junkyard_Dave4 күн бұрын
Just to convert the chassis is 10k
@alexmarquis1717 күн бұрын
The leather Dashboard
@alexmarquis1714 күн бұрын
Blue
@BassManBobBassCovers8 күн бұрын
Definitely shows your skill how fast you had that thing gutted and professionally back together. Should mint once you get the alignment!!
@Junkyard_Dave7 күн бұрын
It drives so much better I need to do an engine swap but for the time being it's a good shop truck
@BassManBobBassCovers7 күн бұрын
@@Junkyard_Dave Hell yeah!
@thestickerboys8 күн бұрын
been debating buying one of these for doing PPF. You hit me right in the feels with the 13B end plate. now i must buy one regardless of worth or purpose
@pullahuru91688 күн бұрын
Can you compare it to Einstar?
@Junkyard_Dave4 күн бұрын
I would need one to do it
@SarahnTuned8 күн бұрын
robot cam 🫡
@Junkyard_Dave8 күн бұрын
My only friend 😆
@carysnyder9298 күн бұрын
I have watched a ton of your stuff, and one thing I noticed is the direction you install bolts. Not to say you are doing anything wrong, just a OCD of mine. I install them what is referred to as "Direction of Flight". This is so if something comes loose it cannot fall out as easy.
@Junkyard_Dave8 күн бұрын
I usually install everything so if 5he nut comes off it can't fall off or its harder to fall out
@tuttonizer9 күн бұрын
And that’s not 06 flairs grill or turn siginals or bumper cover lol
@Junkyard_Dave8 күн бұрын
It's a tremor package bud
@tuttonizer9 күн бұрын
As a ranger owner this isn’t rare lol
@Junkyard_Dave8 күн бұрын
There were only 3k tremor Rangers ever made
@martinp.cadillackid34089 күн бұрын
Would this same kid work on my 05 Mercury Mariner?
@rickytaylor50769 күн бұрын
Imagine having a Coyote in there 😳
@Junkyard_Dave8 күн бұрын
If I do something it will be diesel
@washingandmowing157 күн бұрын
@@Junkyard_Dave maybe a 6.7 power stroke haha, like the f250 and 350 tremors
@user-ow3oc4jy2r9 күн бұрын
Great video dave question would you do this swap for a customer?
@Junkyard_Dave8 күн бұрын
It costs too much no one wants to pay for it to be done right
@budlanctot30609 күн бұрын
Why was the video so dark?
@Junkyard_Dave4 күн бұрын
New camera
@BrucePierson9 күн бұрын
That alignment must have been way, way off to scrub the tires that badly. Wouldn't have done the gas mileage much good either.
@Junkyard_Dave4 күн бұрын
The ball joints were popping in and out so the tow was constantly changing
@americanpatriot2.069 күн бұрын
I was trying to figure out who was holding the camera at the end. It didn't take me long to figure out it was an auto tracking mount. The movements were so robotic. The lighting though was a bit dark. Dave got some new toys. As for those tires! WTF DAVE!! For someone who is such a perfectionist, those tires were WAY BELOW Dave's standards!!!! 🤣🤣🤣🤣
@Junkyard_Dave4 күн бұрын
You have to get your money's worth and now they are new and ready for work. If I could find a camera man I wouldn't need the robot
@josephbuchanan58979 күн бұрын
When they say “built ford tough” they mean it I once had a 82 f100 xlt with a 6 cylinder engine and it had foamy oil probably blown head gasket but never smoked or died ran like a champ
@Junkyard_Dave4 күн бұрын
They are good but most old ones are clapped out
@josephbuchanan58974 күн бұрын
@@Junkyard_Dave oh absolutely 💯 and I wish I still had the truck
@billysantiesteban41999 күн бұрын
Keller?
@BrucePierson9 күн бұрын
Several comments wondering where it is. I'd also like to know what happened with it.
@Junkyard_Dave4 күн бұрын
I will be doing a video on it soon
@wallicefreak9 күн бұрын
Nice build, any updates on the keller
@BrucePierson9 күн бұрын
Wondering that myself.
@fxr1991hd9 күн бұрын
While putting a new engine in it you should have went with the OHV 5.0 and dumped that garbage V6 OHC POS..... Or LS it it!!! Only decent engine Ford has now is the Godzilla V8...All the OHC engines are engineered garbage
@Junkyard_Dave4 күн бұрын
I might do an ls but want to do a diesel
@1leggeddog9 күн бұрын
Looks great!
@Junkyard_Dave9 күн бұрын
Thanks!
@cainpaul089 күн бұрын
Kind of surprised you didn't clean then coat the underside of the truck
@BrucePierson9 күн бұрын
Probably not enough time. He needed it back on the road fast.
@Junkyard_Dave4 күн бұрын
Maybe eventually, I want to repaint the truck eventually
@kd8bac9 күн бұрын
Dave what ever happen to the Keller?
@BrucePierson9 күн бұрын
I was wondering that also. Hope we find out. It was an interesting project.
@mr.e72619 күн бұрын
How much lift was this? Is it RC’s 5in? Anyone here ever seen it lowered to a 3 lift?
@Junkyard_Dave9 күн бұрын
There is a link in the description
@TheFranklush10 күн бұрын
Hey Dave i need a little help finding the reverse wires. I thought the reverse light wires would be inside the tail light harness from the charger. Idk little I’m a little confused
@Junkyard_Dave4 күн бұрын
They are just in the trunk harness I showed them they are the same color on most dodge vehicles
@TheFranklush4 күн бұрын
@@Junkyard_Davethanks I got it
@TheFranklush4 күн бұрын
My two revers wires are white orange and white brown in the trunk harness got harness out of a 2016 srt 392… thanks Dave you got me in the right area to start looking
@RobJenkins-ss1qu10 күн бұрын
Hey Dave, what do you think about Dodgers concert EV charger when dge Magnum Dodge Magnum Returns for 2025 With a CGI Whiff and New-Gen Charger Platform - autoevolution Images
@bretenhumphries68911 күн бұрын
O.k. Dave. I have a 2005 R/t Magnum with the standard 5.7 hemi. Would love to turn it into a Redeye sleepsr. Interested? Let me know. You are a mopar mad genius!
@Junkyard_Dave4 күн бұрын
Plan on spending 50k
@bradgearly11 күн бұрын
Dude, what year was this Ranger?
@Junkyard_Dave4 күн бұрын
It is an 05 or 06
@bradgearly4 күн бұрын
@@Junkyard_Dave looks like an 05 to me.
@johnsmith-qz4bv12 күн бұрын
Going to be a nice build .. how many bottles of raptor liner did u use under the car ..? I have a 07 charger that I want to do.. thanks
@Junkyard_Dave4 күн бұрын
I used 6 underneath and 6 inside
@johnsmith-qz4bv4 күн бұрын
@@Junkyard_Dave ok thank you
@Todestelzer12 күн бұрын
All the reverse engineering softwares are way too expensive for hobby use. You would need a business for it. Creality will never add a feature extraction to the scanning software. Shining is now offering their own reverse engineering software but it cost thousands of dollars. The only cheap way is to use section analysis sketches in CAD software. It takes a lot of time but still cheaper than buying a dedicated software.
@tyeedbrice738312 күн бұрын
I have a 2005 Magnum it has black carpet
@Junkyard_Dave4 күн бұрын
The foot reast is an odd shape though
@performingspecs784112 күн бұрын
This is really impressive that you built this thing!👍
@GoonieLord13 күн бұрын
Step 1 don't own one
@Junkyard_Dave4 күн бұрын
Same can be said about a lot of cars
@coletrickle-km7cl13 күн бұрын
Also have a brake pedal lock. Nascar style quick disconnect steering wheel. Battery quick disconnect. And just have as many layers of security as possible. Make it a impossible bitch to steal.
@coletrickle-km7cl13 күн бұрын
One layer of security isn't gonna cut it nowadays.
Пікірлер
Wow bro that’s an awesome build. Very nice
@@TINKYSTEELE thanks
A few years back, I turned a 2005 Magnum into a police bait car. I had it where you could lock the doors, roll down the windows, shut it off and sound the horn from an internet based remote relay controller. The one thing I remember is how utterly disposable that interior was. Sadly, no shitheads stole it. We should have used Chargers and waited a few years.
Impressive that it didn't lose tracking which doing such a complex scan, and how fast it re-oriented the model when you started doing more scanning. Surely the low ambient light levels are part of why it scanned so well? I've found any light with mains flicker causes all sorts of scanning problems. It'd be great if the budget scanner makers did add reverse engineering features into their software, but I'm not sure I see that happening. How big is the budget reverse engineering market vs the aesthetic / blender / gaming modelling market? I agree an easy way to align the scan with a cartesian coordinate system, add other planes not in that coordinate system, and the take sections through the mesh parallel to those planes to capture hole and boss centres and sizes would be very useful. Selectively turning sections through near circular features into arcs would be super useful too (although no doubt they'd ned to be an a separate file such as a dxf - not a problem as long as it's on the same absolute coordinate system as the mesh). I don't think such an imaginary piece of software needs to be able to do a lot more than that to make reverse engineering scans of car parts in CAD a lot easier. It would also have the nice advantage of being compatible with any CAD system if it only output stl's and dxf's.
tempered glass cannot be cut ,only plate glass and laminate
I just subscribe because he is hot asf 🔥 😍 😩
Oh damn, I remember subscribing to this channel 3 years ago... I though this vehicle would have been done by now.
Why did you speed up going through the process putting on the body armor panels?
Must be nice to be rich to be able to afford the man hours and have the tools to do this.
Can you do this with a dodge caliber?
Kid wasted a good Truck there. I drove an 01 that looked almost identical to yours for 15 years and put 250k miles on it and that thing was a survivor. When I walked away from it it needed a new Engine but everything else worked.
Oh look! A Dodge Charger Touring.
I instantly recognized the rear iron plate, but you called it a housing. The housing sits between the iron plates with a rotor in it and is make of aluminum.
Lube it by pouring it out of the bottle, onto the tool, bench & floor? No. Sloppy. Very poor example for learning DIYers. If I saw a mechanic run a shop like that, I'd run in the opposite direction. You tossed your hand held tubing straightener in the trash?.......just because you got a bigger, more expensive one? Who does that? No one smart.
good content very interesting and helpful information on restoration on cars
What are there bearing part numbers in differential
They are on the bearings
You can tell is an 08 mixed with a 24
hey how much would a swap cost if all the parts were sourced great video!
Just to convert the chassis is 10k
The leather Dashboard
Blue
Definitely shows your skill how fast you had that thing gutted and professionally back together. Should mint once you get the alignment!!
It drives so much better I need to do an engine swap but for the time being it's a good shop truck
@@Junkyard_Dave Hell yeah!
been debating buying one of these for doing PPF. You hit me right in the feels with the 13B end plate. now i must buy one regardless of worth or purpose
Can you compare it to Einstar?
I would need one to do it
robot cam 🫡
My only friend 😆
I have watched a ton of your stuff, and one thing I noticed is the direction you install bolts. Not to say you are doing anything wrong, just a OCD of mine. I install them what is referred to as "Direction of Flight". This is so if something comes loose it cannot fall out as easy.
I usually install everything so if 5he nut comes off it can't fall off or its harder to fall out
And that’s not 06 flairs grill or turn siginals or bumper cover lol
It's a tremor package bud
As a ranger owner this isn’t rare lol
There were only 3k tremor Rangers ever made
Would this same kid work on my 05 Mercury Mariner?
Imagine having a Coyote in there 😳
If I do something it will be diesel
@@Junkyard_Dave maybe a 6.7 power stroke haha, like the f250 and 350 tremors
Great video dave question would you do this swap for a customer?
It costs too much no one wants to pay for it to be done right
Why was the video so dark?
New camera
That alignment must have been way, way off to scrub the tires that badly. Wouldn't have done the gas mileage much good either.
The ball joints were popping in and out so the tow was constantly changing
I was trying to figure out who was holding the camera at the end. It didn't take me long to figure out it was an auto tracking mount. The movements were so robotic. The lighting though was a bit dark. Dave got some new toys. As for those tires! WTF DAVE!! For someone who is such a perfectionist, those tires were WAY BELOW Dave's standards!!!! 🤣🤣🤣🤣
You have to get your money's worth and now they are new and ready for work. If I could find a camera man I wouldn't need the robot
When they say “built ford tough” they mean it I once had a 82 f100 xlt with a 6 cylinder engine and it had foamy oil probably blown head gasket but never smoked or died ran like a champ
They are good but most old ones are clapped out
@@Junkyard_Dave oh absolutely 💯 and I wish I still had the truck
Keller?
Several comments wondering where it is. I'd also like to know what happened with it.
I will be doing a video on it soon
Nice build, any updates on the keller
Wondering that myself.
While putting a new engine in it you should have went with the OHV 5.0 and dumped that garbage V6 OHC POS..... Or LS it it!!! Only decent engine Ford has now is the Godzilla V8...All the OHC engines are engineered garbage
I might do an ls but want to do a diesel
Looks great!
Thanks!
Kind of surprised you didn't clean then coat the underside of the truck
Probably not enough time. He needed it back on the road fast.
Maybe eventually, I want to repaint the truck eventually
Dave what ever happen to the Keller?
I was wondering that also. Hope we find out. It was an interesting project.
How much lift was this? Is it RC’s 5in? Anyone here ever seen it lowered to a 3 lift?
There is a link in the description
Hey Dave i need a little help finding the reverse wires. I thought the reverse light wires would be inside the tail light harness from the charger. Idk little I’m a little confused
They are just in the trunk harness I showed them they are the same color on most dodge vehicles
@@Junkyard_Davethanks I got it
My two revers wires are white orange and white brown in the trunk harness got harness out of a 2016 srt 392… thanks Dave you got me in the right area to start looking
Hey Dave, what do you think about Dodgers concert EV charger when dge Magnum Dodge Magnum Returns for 2025 With a CGI Whiff and New-Gen Charger Platform - autoevolution Images
O.k. Dave. I have a 2005 R/t Magnum with the standard 5.7 hemi. Would love to turn it into a Redeye sleepsr. Interested? Let me know. You are a mopar mad genius!
Plan on spending 50k
Dude, what year was this Ranger?
It is an 05 or 06
@@Junkyard_Dave looks like an 05 to me.
Going to be a nice build .. how many bottles of raptor liner did u use under the car ..? I have a 07 charger that I want to do.. thanks
I used 6 underneath and 6 inside
@@Junkyard_Dave ok thank you
All the reverse engineering softwares are way too expensive for hobby use. You would need a business for it. Creality will never add a feature extraction to the scanning software. Shining is now offering their own reverse engineering software but it cost thousands of dollars. The only cheap way is to use section analysis sketches in CAD software. It takes a lot of time but still cheaper than buying a dedicated software.
I have a 2005 Magnum it has black carpet
The foot reast is an odd shape though
This is really impressive that you built this thing!👍
Step 1 don't own one
Same can be said about a lot of cars
Also have a brake pedal lock. Nascar style quick disconnect steering wheel. Battery quick disconnect. And just have as many layers of security as possible. Make it a impossible bitch to steal.
One layer of security isn't gonna cut it nowadays.
Those pesky basketball Americans 😢