Пікірлер

• 
  @EskoxoКүн бұрын

  maybe worth it to repair yourself if your going to use it but not paying someone as you can find em for like $50.

• 
  @geraldkristianmperez65052 күн бұрын

  Love your vids bro

• 
  @DiscountSasquatch2 күн бұрын

  Thanks, and appreciate the support!

• 
  @kalebarger60632 күн бұрын

  Omg cute kitty. Good vid. 👍😸

• 
  @DiscountSasquatch2 күн бұрын

  Thanks! :)

• 
  @jtchoi20033 күн бұрын

  Man, the teardown really hurt to watch. I suggest watching Josh Davison's Slim teardown guides so you can properly disassemble one of these in the future. Reguardless, nice repair.

• 
  @DiscountSasquatch2 күн бұрын

  100% agreed. Though, you've gotta' admit, I did break way less tabs than most people would've predicted.

• 
  @thedylanshow13 күн бұрын

  Great video thank you.

• 
  @magnetite0284 күн бұрын

  Thanks, I was glad to see how to identify negative on the cap holes. Cheers

• 
  @DiscountSasquatch4 күн бұрын

  No problem, and thanks for watching!

• 
  @NoBoDy-cv2cf14 күн бұрын

  I can confirm that it’s not the power supply

• 
  @MarkJohnson-lw9fk16 күн бұрын

  Not a good design. The bearing constant clogs with hair as others have mentioned. The screw that you could not remove is backwards (right hand thread - turn it backwards from normal to loosen). It does not have to be tight - if you over tighten it that will lock up the brush (just like the wrapped up hair - the brush rotation keeps the screw from coming loose). We like the vacuum but every other use the bearing needs to be cleaned - terrible design for a “pet vaccuum” - if you can avoid long hair that wraps up the brush bearing it works well.

• 
  @DiscountSasquatch4 күн бұрын

  100% agree. This vacuum is horrible. I got it for free, and still feel ripped off.

• 
  @Hellraiser98822 күн бұрын

  That's not a red ring it's a frag second of all there's multiple causes

• 
  @user-rn1yh8ci6o23 күн бұрын

  I have that same type of xbox and it's red and someone said you can't fix it

• 
  @erik9013Ай бұрын

  Awesome video!😁

• 
  @DiscountSasquatchАй бұрын

  Thanks, and thank you for watching!

• 
  @imdanielhАй бұрын

  At first, thank you for all your effort. I would like to ask wheter do you plan to continue this thread, because it seems I’m in the same shoe as you. I’m after a mod chip removal, but the disk tray eject doesn’t work, no spinning just the blue button blinks when I press it. I also know that the drive worked before with the chip,and I have two machines with this symptom (ps2 scph-50004)

• 
  @DiscountSasquatchАй бұрын

  Thanks for watching, and definitely intend to get back to this one. Hopefully better news in the next re-visit!

• 
  @hugorsalgadolАй бұрын

  Perfect

• 
  @AKI_KTV.2 ай бұрын

  i have this problem too after removing the infinity matrix modchip..

• 
  @shrimplyobsessed2 ай бұрын

  BRO YOU GOTTA TELL ME IF IT WORKED MY XBOX HAS THE SAME PROBLEM IM ABOUT TO GO HOME AND DO THIS TO MINE I HAVE NOTHING TO LOOOOOOOOOOOSE

• 
  @IRVERA23-po1uoАй бұрын

  How was your experience?

• 
  @shrimplyobsessedАй бұрын

  @@IRVERA23-po1uo I did an oscilloscope probe between 2 Xboxes; a known good power supply and the power supply in the bad Xbox. There was a noise difference between the two, indicating a possible bad power supply, however switching power supplies did not affect the error on my Xbox. Sadly the Xbox is now a parts piece, there's nothing else I can do. It's possible the power supply could have helped but I know the clock cap exploding did a number on the components around it

• 
  @gfficomable2 ай бұрын

  Great video, very well explained and presented. I think this will fix my problem. Thank you.

• 
  @DiscountSasquatch2 ай бұрын

  Thanks! Very much appreciated, and I hope it helps you out.

• 
  @vicbanks90792 ай бұрын

  MIne's doing the same thing. The belt seems looser than yours. But that drive gear has lost its teeth. Will try your shrink tubing idea. What size did you use? very nice jury rig solution.

• 
  @DiscountSasquatch2 ай бұрын

  Thanks. I believe it was a 1.5" piece of tube, but am not sure of the exact type - these were offcuts that a friend passed to me.

• 
  @vicbanks90792 ай бұрын

  @@DiscountSasquatch I took apart that entire brush head left and right sides and found a wad of long hair tightly wound around the spindles like a fishing reel!. The belt was ok, altho some of the drive wheel teeth were worn, I used a little bit of gaffer's tape (which has cloth-like surface). Put it all back and it works. Thx

• 
  @daisywong-ke1kz2 ай бұрын

  Nice work!

• 
  @DiscountSasquatch2 ай бұрын

  Thank you!

• 
  @jetset8082 ай бұрын

  shouldn't you be using silicon grease not lithium.

• 
  @DiscountSasquatch2 ай бұрын

  Either can be used (from what I remember). However, silicone grease has a tendency to eat away at other parts made of silicone such as seals, belts, or wire insulation. (Not to say that all lithium greases are fine though - make sure they're not petroleum-based before applying them to plastic.)

• 
  @graealex2 ай бұрын

  What's missing is the typical quick change in colors and brightness when a scene on TV changes. You only have the slow changes.

• 
  @realflow1002 ай бұрын

  Yeah they should also have periods where its darker and flashes bright when something exciting or action happens on screen.

• 
  @DiscountSasquatch2 ай бұрын

  Yep, in retrospect I should have added more than two fast-flashers (the camera didn't really pick those up very well too). But, if anyone wants to duplicate this cursed design, learn from my mistakes.

• 
  @graealex2 ай бұрын

  @@DiscountSasquatch I think there needs to be more coordination, even with fast flashers. Like you have a scene that runs for 2 to 10 seconds, in which you move the colors slowly, and then completely switch them over to new starting values, where you can have slow fading again. It's pretty much a job for a micro controller.

• 
  @DiscountSasquatch2 ай бұрын

  @graelex 100% agree with you. This was just really meant to be a small project that someone with little or no background in electronics can do. I might do a redemption arc though, and try out a version 2 with an Arduino.

• 
  @niaimack2 ай бұрын

  You should try warming up your meds before taking them if they causing you to make mistakes. 😜

• 
  @DiscountSasquatch2 ай бұрын

  Hi everyone, I'll be posting a link to that 6 min timelapse here once KZread's finished processing it. Not sure why anyone would want to watch it, but to each their own... Edit: And here's the link: kzread.info/dash/bejne/hKGK0qR_daqtqrg.html Enjoy?

• 
  @TamelotCleaningServices2 ай бұрын

  My brush roller is still working but there is that same noise coming from mine. There seems to be hair caught around the main centerfuge drive which I cannot get the screw out to clean (that thingy you had to use pliers on. I can't get the backing plate off either. UGH! My model is similar but is red, not blue.

• 
  @DiscountSasquatch2 ай бұрын

  Yep, this is not a good vacuum cleaner. The replacement one that they sent out broke the exact same way three months later...

• 
  @8bitnation4192 ай бұрын

  Could be an issue with the 47ohm Resistors near the GS GPU chip.

• 
  @elfandre64982 ай бұрын

  Hi, did you use this battery today?

• 
  @gladlinar58832 ай бұрын

  Ssme things happened to mine.

• 
  @TheFenecFox3 ай бұрын

  I'm also having a similar problem! Weirdest part though is that it's random. Meaning, I can throw Combat Evolve on it, play it ok and then turn it off. Then later push the power button and get the red ring. After a power cycle it will work again. I only worked on computers so I'm a TAD hesitant on working on it, but I rather do it now than later

• 
  @DiscountSasquatch2 ай бұрын

  Thanks for watching! Sounds like you might have one or more bad capacitors on the board. If you're comfortable working on it, open it up and take a look and see if you notice any obviously bulging/leaky capacitors. (Note that bad capacitors won't always do that though.) At the very least (and assuming you don't have a version 1.6 Xbox), you'll want to remove the supercapacitor before it does too much damage to the motherboard.

• 
  @robleej_3 ай бұрын

  I watch all of the usual repair suspects and this was refreshingly different when you switched out the entire controller because you haven't yet spent years and (quite) some cash building up a spare parts store, great job keep going! :)

• 
  @leonard59113 ай бұрын

  Im seeing you handle that power supply with no worries. Some people say it can zap the crap out of you. Whats up with that

• 
  @DiscountSasquatch3 ай бұрын

  Yep, the capacitors in power supplies can and will give you a nice shock if you're not careful. At 4:00 I'm checking the capacitors to see if they still have any juice left in them.

• 
  @joshkelly46823 ай бұрын

  There are different versions of the samsung drive, sdg-605b and sdg-605f

• 
  @joshkelly46823 ай бұрын

  I've been trying to find a working laser for my sdg-605b that isn't coming from China because of the cargo ships being attacked

• 
  @xtroncool0073 ай бұрын

  Where’s part 3 vid?????

• 
  @xtroncool0073 ай бұрын

  Really really great group of video’s mate Don’t give up !! Very interesting to me this content!!! Keep up the great work

• 
  @Randomii6663 ай бұрын

  I know i'm late for this, but you could had removed both the 5815 and the 6664 and tried to power it on. If they were faulty, you would get picture but obviously have no disc drive with one or both of them removed

• 
  @DiscountSasquatch3 ай бұрын

  Genuine thanks for this - that's actually pretty helpful for when I muster up enough courage to try to open that thing again. Stay tuned for Part 3... sometime in the future...

• 
  @Randomii6663 ай бұрын

  @@DiscountSasquatch 👀 I believe in you! It'll be alive again soon!

• 
  @Randomii6663 ай бұрын

  You should always remove the modchip first before doing anything else when you have an issue. This was most likely caused by the solder joints coming loose (Or already being shorted when it was installed) and the chip shorting out. The BA5815FM chip was already dead (No display and no eject) so no worries. Even losing the magic smoke usually isn't a big deal. I accidentally shorted out the equivalent chip with my multimeter probe on a PS2 slim and burned a massive hole in it while trying to diagnose no disc spin. Turned out, it was the issue all along, as replacing the burned chip fixed the original issue xD Removing the modchip and replacing the BA5815FM (And the fuse if it's blown) would probably be enough to fix the console in case someone has the same issue

• 
  @martinpetrov72283 ай бұрын

  LOL WTF? Why would you need to update a subwoofer?

• 
  @MikeleKonstantyFiedorowiczIV3 ай бұрын

  to use app etc.

• 
  @TokeBoisen3 ай бұрын

  There are plenty of reasons. Modern subwoofers use extensive DSP control to alter, control and limit their behavior. In a system like this a firmware update might include changes to limiters, temperature monitoring, a new set of EQ-filters, improvements to wireless connectivity to the main unit, and so on and so forth.

• 
  @jacobjones7844 ай бұрын

  I’m having a similar issue with mine, however we stopped using it before the belt tore the gear up. We only used ours for around 3 months before this happened. It seems to be missing some sort of belt tensioner that I can only guess goes in that small rectangle under where the belt rides. And like you found Hoover doesn’t sell any parts for this. Really wanting to find a solution, but will definitely not be buying another Hoover after this

• 
  @DiscountSasquatch3 ай бұрын

  Yep, I can also confirm that the replacement that Hoover sent also failed within 3 months with the exact same problem...

• 
  @danny-bt2wl4 ай бұрын

  lol this my old ps2 I Modded to play different region games recognise my warranty sticker the Laser has been pot Tweet to high that the problem I bin it a Year ago as i couldn’t find a replacement laser

• 
  @DiscountSasquatch3 ай бұрын

  Hah, that's hilarious. Well... at least I know a little more about its history now.

• 
  @daddykratos89804 ай бұрын

  Hey great video, not many people show the mistakes that happen when repairing electronics and i appreciate the information in the video because you might have potentially saved me from have to buy replacement drives to solve the original Xbox error codes of error 11 or 12 thanks again cant wait to check the resistances of the DVD drive motherboards

• 
  @DiscountSasquatch4 ай бұрын

  Thanks, and glad I could help! At least some good came out of this debacle.

• 
  @samaeldrakul41915 ай бұрын

  awesome work m8 bravo 🎉 subscribed

• 
  @carlosrivas44085 ай бұрын

  I would love more information on how I can get you to fix my Xbox

• 
  @wyattgamingandsign2.0ok766 ай бұрын

  I have two original Xboxes one with a bad disc drive but other than that works and one that has a red ring of death

• 
  @sleepwalker296 ай бұрын

  Copper tips are easier to clean, but they melt into the solder at high temps. I use copper wool to clean them. The SS tips don't melt, but are harder to clean. Steel wool is what I use to clean the SS tips. I attempted to repair this PCB board and I removed all top mount SMD capacitors and they were all good. After that I tossed it in the trash. I also did continuity test. I couldn't figure out what went bad.

• 
  @Wuggyboobeaufuf1386 ай бұрын

  I have an OG Xbox with a Red Ring of Death It's irritating

• 
  @caseys7006 ай бұрын

  Anecdotally... My 1.2 XBox worked (poorly) before I replaced the same 3 capacitors near the CPU. Mine were also boiled out. After I initially replaced the caps, my box started the same cycle error. I actually watched your initial video looking for a fix. In my case, I figured it must be linked to the one thing I had done. I reflowed the caps and it fixed it for me. I assume it was a cold solder joint. Something you might try if you haven't already.

• 
  @DiscountSasquatch6 ай бұрын

  Thanks, that's some good info to know. Will take that into consideration on a revisit.

• 
  @leso2046 ай бұрын

  So i got a lot of bridges i'll put some more solder on' backstreet hero's lol .......

• 
  @DiscountSasquatch6 ай бұрын

  "heroes", not "hero's"

• 
  @daliromeriskie3286 ай бұрын

  Get hakko tips

• 
  @DiscountSasquatch6 ай бұрын

  Will those work on a non-hakko iron?

• 
  @daliromeriskie3286 ай бұрын

  @@DiscountSasquatch yes! I have a cheap soldering station from Amazon and I replaced the tips with hakko tips and it works great.

• 
  @daliromeriskie3286 ай бұрын

  @@DiscountSasquatch also I recommend getting a soldering tip cleaner

• 
  @joshgoodwin64956 ай бұрын

  When trying to remove bridges, dont tin the tip, get yourself a tip cleaner, steel wool, and make it as clean as possible. Little bit of flux and it should pull it out. Good luck man.

• 
  @DiscountSasquatch6 ай бұрын

  Thanks - will give that a shot and see if it works!

• 
  @Hellraiser9886 ай бұрын

  I'd recommend a clean tip a bit of flux and some solder wick if you wanna remove a bridge

• 
  @Hellraiser9886 ай бұрын

  Also I wouldn't recommend using a solder sucker on the pins

• 
  @tyg3rpro6 ай бұрын

  I would try the control board from the bad laser one in the error 12 one, for solder tiny legs like that a heat gun or heat station would work far better. I used to repair the Xbox 360's and had to replace many a laser on those, that board realistically is what's likely causing the error 12 to begin with, and trying a different board shouldn't make a difference as far as hardware goes, it just drives a laser a couple stepper motors and a spindle motor

• 
  @DiscountSasquatch6 ай бұрын

  Will definitely give that a shot, if the soldering fails again - just hoping that the other drive is also a Samsung, and not a Thompson etc...

• 
  @tyg3rpro7 ай бұрын

  Just found your YT channel, been a big fan of your written works for years, actually inspired me to start writing, loving the videos, it gives the world a chance to see some of the other skill sets that an author could have

• 
  @DiscountSasquatch7 ай бұрын

  Thanks, and glad you enjoyed the books. :) Also happy to hear that I helped inspire you to start writing. That actually means a lot to me. Also, I promise that book 6 is on the way soon... ish... If you've got any stuff published, let me know and I'll check it out (and maybe even drop a plug for you in an upcoming video if you want). Always on the lookout for new books to read.

• 
  @tyg3rpro7 ай бұрын

  @@DiscountSasquatch I'm still writing it, but I can send you some of the un-edited material I have so far if that interests you.

• 
  @DiscountSasquatch7 ай бұрын

  That'd be awesome, and I'd love to have a look if you're okay with it. You can email it to either the contact address on the channel here, or my author webpage contact address.

• 
  @tyg3rpro7 ай бұрын

  @@DiscountSasquatch emailed the pdf