I just got my Fairing with NO manual. I wanted to see your video to see how to mount it and where the hardware go. You have a good video but it don't show the full install with all the hardware. I'll keep looking for something I could use
@jeffbanfieldsflwr3537Күн бұрын
Nice job man.
@jbflyfishingjbflyfishing40682 күн бұрын
Another great video. quick question ? Is it the same process for older Dyna’s I’ve got a 94 wide glide? Your video was the fist to pop up the bike is new to me
@LOVE-JC7774 күн бұрын
Not the transmission. HD says up straight check level. Engine is fine on jefy stand.
@dannpd19556 күн бұрын
I wouldnt have watched if Id have known you were not going to give us some sort of review. You lost me.
@OldeThunderCC7 күн бұрын
San Diego chopper guy looking into dynas 👌 late to the party but here we go! Subbed today.
@EastSideSteve6198 күн бұрын
Great video, thank you guys! Question: I ordered the Moons MC integrated tailight and circuit board along with the Gorilla wire harness for my 2017 FXDLS. Got everything installed and buttoned up on the new fender but my brake light is constantly on, and my hazards don't work. The signals kinda work where the outer portion of the signal works. If I unplug on of the two "2 wire" connectors from the circuit breaker, I get a "full" signal as in there are two rows of LEDs signaling (imagine a later model mustangs signal style). Any thought or suggestions I can try?
@russellscott215914 күн бұрын
Can you get a plex in there
@B-F-F-B_2814 күн бұрын
Why does the amber lights illuminate when you hit the brake and not red?
@roldanmike9415 күн бұрын
I did the conversion, but my kick Stand rubs against my chain when it’s up
@DM-ci2nn17 күн бұрын
I ride a BMW. The gentlemans motorcycle. Im better than all of you.
@sebastianfrank429517 күн бұрын
All right?!
@grindfestoutdoors20 күн бұрын
What do I need to do for my 2005 SG? Has a top mount I think.
@derekyuill500923 күн бұрын
You should have bought a Honda
@tzon6802Ай бұрын
1. Paint dyna black bro 2. T bars bro 3. Speakers on T bars bro 4. Tall shocks bro 5. thunder header bro Be a Dyna bro, bro!
@kbayoableАй бұрын
Does your front fairing makes a lot noise when riding? Mine vibrates alot
@russellsouza9328Ай бұрын
Question, if I run the moons my headlight block will that fit correctly/ lower the v2h fairing a little bit
@RichardMcLarnonАй бұрын
I appreciate all the info, going to pick one up today..
@EliteGeeksАй бұрын
BTW, the lift come with a wheel clamp, not a chock.. you can remove the clamp or get it out of the way when the wheel needs to be worked on, with a chock, you have to take the bike back off and then back on again get the upgraded clamp from HF
@EliteGeeksАй бұрын
They have a Coupon up right now, just got it for $499, plus $15 off with my HF Credit card, and 0% for 12 months
@JoeyChanthalakeoАй бұрын
Do you remember the dimensions of the square cutout for the taillight on the fender? Wondering if the stock fender on a '14 FXDB would be too short for the license plate and tail light conversion.
@Christofuzz-hc9xlАй бұрын
Great job, awesome video,im doing a front to mids swap on a wide glide,have to change out innr primary, so this is a big help
@user-zx7eo7nu4bАй бұрын
Great video,worst thing I ever did was put forward controls on a 120 hp bike. Oh, No one saw you pull the entire clutch hub or the compensator assembly lol..
@christiangeorge358Ай бұрын
Why geurilla compared to namz. 100 bucks diff in price.
@RollingRigTractionАй бұрын
Having a hard time finding a '94 FXDWG speedo+tach relocation kit. Any options you can recommend?
@chrisoliver8423Ай бұрын
What bags are your running brother ? Been looking for dyna Bags...those are sick ! Love the adventure type look, protection bars. What brand ? Anyone know Thanks
@1luckyleppyАй бұрын
Thanks for the video. Nicely done
@karenfromirelandАй бұрын
In Ireland most restaurants include a 15% service charge on your bill or more for larger groups so tipping after that was never a thing here until recent years. It was usually only American tourists who left cash tips on the table. Nowadays tipping has become more the norm. That said the difference in service between USA and Ireland is like night and day. Irish service is shockingly bad - no peronality, they barely speak to you show no interest in your patronage but yet feel entitled to a large tip.
@user-ud4sr7ee2zАй бұрын
Use heavy Hydraulic Tube Fluid .To make it stiffer .
@illduitmyselfАй бұрын
$400 for brackets....no dude
@lordtuscaskypАй бұрын
Thank you, im gona do the same on my street bob! Cheers from Portugal
@chuldancha2 ай бұрын
I'm currently riding the v star 1100 classic and thinking about switching the bike to HD low riders. I've never ridden HD before but I hear lot of quality issues about HD. I have zero knowledges about engines. I need you guys' thoughts and suggestions on this idea me switching bike to HD. Even though I hear lot of problems with HD but HD's been my dream bike all my life. Thank you all... Cheers! Dan
@mike71972 ай бұрын
Great video.. would like to know the source of that sissy bar on the dyna your wkg on.
@Nightraincruiser2 ай бұрын
Makes a lot of sense alltogether
@jholeshot2 ай бұрын
hey, great video, I have an06 street bob FXDBI Would you know where I can find the mid controls for this I'm having a hard time locating any of the parts other than arlen ness parts around $1000.00 too rich for my blood just for a shifter and brake pedal my bike already has the mid pegs, I only need pedals, and shifter shaft. Thanks so much. John
@dynademos2 ай бұрын
Hit up @dynadicksdeals he can get u whatever u need 👍🏽
@trubullyzzeusfam15462 ай бұрын
Bouta grab one rn!!
@hondamxbmx6922 ай бұрын
Just did this today. Is it normal for the shift shaft coming through the outer primary to have in/out play? I can slide mine in and out until the inner arm hits against the motor in the back side. I thought there was maybe a clip or something to prevent this.
@dynademos2 ай бұрын
Do u have a spacer on the shift shaft that goes on right before the shifter arm?
@hondamxbmx6922 ай бұрын
@@dynademos I do not, that was my thought though. I can just go buy a spacer to take up the play. Did your kit come with one?
@dynademos2 ай бұрын
@@hondamxbmx692 Shifter Shaft Spacer - 1602-1301 from drag specialties. I don’t remember but it’s like 5-7 dollars that should fix your issue
@hondamxbmx6922 ай бұрын
@@dynademos awesome thanks
@corneilcorneil2 ай бұрын
You need only 4 upgrades: Honda, Kawa, Yamaha, Suzuki.
@kipropering2 ай бұрын
Thanks for this. Just got it and the no manual in the package
@I_am_archie2 ай бұрын
🤠👍🏻
@r_itchytrigger2 ай бұрын
Love the footage! More of what we love. It lets me dream of such beautiful rides while being stuck in mining camps in northern Canada. Cheers Eh!
@r_itchytrigger2 ай бұрын
Cool story bro. Did you pee a little bit while you were riding too? 😂
@spirosrnw2742 ай бұрын
How did you open the middle hole of the outer driver? Do I have to change the outer driver?
@jason350Z_032 ай бұрын
mine the jack was busted and pissed all the fluid out new in the box. returned and all they gave me was 20 bucks to compensate my wasted time even know they will charge you 180 if you want them to ship it to you
@michaelandrew48492 ай бұрын
Does your clutch side not have that little nipple on the bottom that lines the turn signal mount up. I tried the Amazon hand guards but my clutch side has that little nipple on the bottom of the clutch lever so I have to cut a little notch to get them to work
@donniee19342 ай бұрын
Thanks for the video. Thank you too for your service brother
@christianmiranda232 ай бұрын
Going from 12 13, would I have to adjust belt tension
@josephr61742 ай бұрын
Do you have links for the gaskets and bolts you replaced?
@YungRasteezy2 ай бұрын
Can we get the parts list? There's no links on the description of video..
Пікірлер
Just bought a Used one in good condition for 150
I just got my Fairing with NO manual. I wanted to see your video to see how to mount it and where the hardware go. You have a good video but it don't show the full install with all the hardware. I'll keep looking for something I could use
Nice job man.
Another great video. quick question ? Is it the same process for older Dyna’s I’ve got a 94 wide glide? Your video was the fist to pop up the bike is new to me
Not the transmission. HD says up straight check level. Engine is fine on jefy stand.
I wouldnt have watched if Id have known you were not going to give us some sort of review. You lost me.
San Diego chopper guy looking into dynas 👌 late to the party but here we go! Subbed today.
Great video, thank you guys! Question: I ordered the Moons MC integrated tailight and circuit board along with the Gorilla wire harness for my 2017 FXDLS. Got everything installed and buttoned up on the new fender but my brake light is constantly on, and my hazards don't work. The signals kinda work where the outer portion of the signal works. If I unplug on of the two "2 wire" connectors from the circuit breaker, I get a "full" signal as in there are two rows of LEDs signaling (imagine a later model mustangs signal style). Any thought or suggestions I can try?
Can you get a plex in there
Why does the amber lights illuminate when you hit the brake and not red?
I did the conversion, but my kick Stand rubs against my chain when it’s up
I ride a BMW. The gentlemans motorcycle. Im better than all of you.
All right?!
What do I need to do for my 2005 SG? Has a top mount I think.
You should have bought a Honda
1. Paint dyna black bro 2. T bars bro 3. Speakers on T bars bro 4. Tall shocks bro 5. thunder header bro Be a Dyna bro, bro!
Does your front fairing makes a lot noise when riding? Mine vibrates alot
Question, if I run the moons my headlight block will that fit correctly/ lower the v2h fairing a little bit
I appreciate all the info, going to pick one up today..
BTW, the lift come with a wheel clamp, not a chock.. you can remove the clamp or get it out of the way when the wheel needs to be worked on, with a chock, you have to take the bike back off and then back on again get the upgraded clamp from HF
They have a Coupon up right now, just got it for $499, plus $15 off with my HF Credit card, and 0% for 12 months
Do you remember the dimensions of the square cutout for the taillight on the fender? Wondering if the stock fender on a '14 FXDB would be too short for the license plate and tail light conversion.
Great job, awesome video,im doing a front to mids swap on a wide glide,have to change out innr primary, so this is a big help
Great video,worst thing I ever did was put forward controls on a 120 hp bike. Oh, No one saw you pull the entire clutch hub or the compensator assembly lol..
Why geurilla compared to namz. 100 bucks diff in price.
Having a hard time finding a '94 FXDWG speedo+tach relocation kit. Any options you can recommend?
What bags are your running brother ? Been looking for dyna Bags...those are sick ! Love the adventure type look, protection bars. What brand ? Anyone know Thanks
Thanks for the video. Nicely done
In Ireland most restaurants include a 15% service charge on your bill or more for larger groups so tipping after that was never a thing here until recent years. It was usually only American tourists who left cash tips on the table. Nowadays tipping has become more the norm. That said the difference in service between USA and Ireland is like night and day. Irish service is shockingly bad - no peronality, they barely speak to you show no interest in your patronage but yet feel entitled to a large tip.
Use heavy Hydraulic Tube Fluid .To make it stiffer .
$400 for brackets....no dude
Thank you, im gona do the same on my street bob! Cheers from Portugal
I'm currently riding the v star 1100 classic and thinking about switching the bike to HD low riders. I've never ridden HD before but I hear lot of quality issues about HD. I have zero knowledges about engines. I need you guys' thoughts and suggestions on this idea me switching bike to HD. Even though I hear lot of problems with HD but HD's been my dream bike all my life. Thank you all... Cheers! Dan
Great video.. would like to know the source of that sissy bar on the dyna your wkg on.
Makes a lot of sense alltogether
hey, great video, I have an06 street bob FXDBI Would you know where I can find the mid controls for this I'm having a hard time locating any of the parts other than arlen ness parts around $1000.00 too rich for my blood just for a shifter and brake pedal my bike already has the mid pegs, I only need pedals, and shifter shaft. Thanks so much. John
Hit up @dynadicksdeals he can get u whatever u need 👍🏽
Bouta grab one rn!!
Just did this today. Is it normal for the shift shaft coming through the outer primary to have in/out play? I can slide mine in and out until the inner arm hits against the motor in the back side. I thought there was maybe a clip or something to prevent this.
Do u have a spacer on the shift shaft that goes on right before the shifter arm?
@@dynademos I do not, that was my thought though. I can just go buy a spacer to take up the play. Did your kit come with one?
@@hondamxbmx692 Shifter Shaft Spacer - 1602-1301 from drag specialties. I don’t remember but it’s like 5-7 dollars that should fix your issue
@@dynademos awesome thanks
You need only 4 upgrades: Honda, Kawa, Yamaha, Suzuki.
Thanks for this. Just got it and the no manual in the package
🤠👍🏻
Love the footage! More of what we love. It lets me dream of such beautiful rides while being stuck in mining camps in northern Canada. Cheers Eh!
Cool story bro. Did you pee a little bit while you were riding too? 😂
How did you open the middle hole of the outer driver? Do I have to change the outer driver?
mine the jack was busted and pissed all the fluid out new in the box. returned and all they gave me was 20 bucks to compensate my wasted time even know they will charge you 180 if you want them to ship it to you
Does your clutch side not have that little nipple on the bottom that lines the turn signal mount up. I tried the Amazon hand guards but my clutch side has that little nipple on the bottom of the clutch lever so I have to cut a little notch to get them to work
Thanks for the video. Thank you too for your service brother
Going from 12 13, would I have to adjust belt tension
Do you have links for the gaskets and bolts you replaced?
Can we get the parts list? There's no links on the description of video..